Become a Patron!

help

  1. Mr. Mavan123

    Smok TFV12 vs TFV8

    Hi. I have a tfv12 tank with an alien 220. I've noticed when I take a pull from my vape it makes very faint poping and crackeling noises and has never been very smooth compared to my friends TFV8 tank. I don't think I've installed my coils incorrectly. Is the tfv8 just that much smoother? I...
  2. D

    Kangertech Dripbox 2

    Long story short, I tried to use my mod after changing the battery but it didn’t work so I looked in the battery chamber and a rubber piece that seemed to be around the positive connector of the mod itself was stuck out, tried to put it back in, it fell out. Now I’m scared to use it. Anybody...
  3. Z

    Do you have to use a certain coil for a certain tank?

    I have the Kangertech Subtank Mini 4.5ml Tank and I have a kangertech coil but my old coil was a cube and this one is a cylinder and I dont know if it is compatible with my tank and I dont want to break it.
  4. C

    Question about voltage drop

    Hello all. Just a question about voltage drop, if the voltage of my battery is at 3.8v and the voltage drops it to 3.3v~3.5v so 0.5~0.3 difference, do I need to charge my battery since 3.7v is where I'm supposed to be charging at? Should I just wait until the voltage of my battery hits 3.7v...
  5. C

    Need help checking this battery

    Hello all! I was wondering if the markings on the negative side of the battery is safe to use. I was using it on a mech tube and it made those markings. The battery is a Sony VTC5a.
  6. B

    Which new mod to get

    Hey need help on which mod to get. My budget is around $60-$80. I'm not really an expert vaper... just need an upgrade from my iStick Pico 75W. I looked around and I did find some that caught my attention. I also watched and read some reviews of it online. The main reason on why I want to buy...
  7. M

    Don't know which mod to buy

    Hello, So i'm new here and i really hope i'm posting in the right topic. But i have qucik question. I'm looking for vape mod for max 40€ (47$), and i don't know which one to get. I have a closer selection with 2 mods. And i need your opinions which one is better and pls why. First one is: IJOY...
  8. M

    Reuleaux rx2/3 check battery problem

    So my friend gave me his reuleaux rx2/3. I almost have 0 knowledge about vapes other then how to hit it and charge it (lol). Recently its not been turning on. When I plug it into the USB charger, it comes on as normal but when I press the power button I get a "check battery" error. I know there...
  9. Kitten_13

    I'm so sorry in advance :c

    I'm a COMPLETE NEWBIE to vaping and I'm not sure what are the best things and what to look for and, mostly everything. An acquaintance of mine said I should try it and well I liked it and I've been wanting to start but I'm not exactly sure what is the best mod box, what kind of juice is better...
  10. askalade

    Mech question

    So, i've been seeing alot of nice squonk mechs around lately and was thinking about purchasing one. However, i vape a dual alien staggerton atm at 0.06 ohms on my revenger. But a build like that, i wont be able to safely vape on a mech right? Because even if you get a parallel box you will have...
  11. C

    Need help on DNA 75C Profile, mainly for Therion BF DNA 75C

    Hello all! I have just gotten the Therion BF DNA 75C and it looks lovely. By any chance, doas anyone have the EScribe material and the profiles for it? I'm mainly only vaping on SS 316L wires and maybe Ni80 wires. Power mode and watts profile would be nice also.
  12. W

    iJOY RDTA Box broken?

    Hello, I have noticed while vaping that my iJOY RDTA Box randomly starts dropping watts, and I can't pretty much do anything, it just drops down to 5W and stops there until I press a button, then I can take a few hits and it will happen again. I have checked everything, the batteries & if the...
  13. Henli503

    Is this safe?

    Hey guys i plan om using My topbox mini with a burner and tank from My Friends subbox mini. The burner says: 15-30w occ 0.5 ohm and has a red circle on it. I am filling My tank with pink-furys "Go green" 6mg/ml nicotine e-liquid and i Will probably try 10-20 Watts. I've f#cked Up before and i...
  14. I

    I'm new and need advice for tricks

    So I just bought a vape off of my friend, I don't really know much about vaping in general. It's the Tarot Pro box mod, I'm using a Smok .15 ohm coil and it's suggested wattage is 50-110. I currently vape at 70 watts and a temp of 200C. I can blow O's like a champ but they are weak and diminish...
  15. J

    Newbie here needing help with Basic Eleaf

    Hi, I'm new to vaping and I recently purchased the basic eleaf. I started having issues with it. When I take a drag, it will make a spark noise (I can feel something like a shock to my tongue), and then I taste the eliquid. I've tried cleaning this and replacing the tank and coils. Nothing seems...
  16. Henli503

    I don't know what i'm doing!

    Hey guys, as the title states, i don't know what i'm doing! I'm new to vaping and i feel like i've already made all the mistakes i can without thinking ahead. Firstly, i had My Friend help me set it up but even thought he did prime the Cotton i'm pretty sure we both Took a couple of dry hits and...
  17. MustangMoney

    Best Build for Vgod Copper mech mod

    Hey all, I'm looking to get back into comps and I'm seeing alot of people running some fancy builds on mechs and producing crazy cloud with a nice ramp up time. I was wondering, for a copper vgod pro mech mod and a 24mm goon what would be the best ohm to run with. I'm used to running .08-.1 with...
  18. N

    OSub Baby (80w) Need Help!

    Help, please! I've only had my OSub 80w baby for just under three months and there's something wrong with the battery door. It's like it's not connecting with the batteries properly and showing me a low battery warning half the time when my batteries are freshly charged (bought new batteries...
  19. C

    iSonic P4810 vs iSonic P4820 for Steeping and cleaning coils, atomizers, etc.

    Hello guys, I finally found the Ultrasonic cleaner I wanted but I can't decide between these two. Which one should I get for cleaning Coils and Atomizers and also for Steeping E-Juice and doing DIY?
  20. Sammiimariee

    Coil Help??!!!

    so, I have a baby beast tank and I always use T8 coils along with my Smok Alien 220 mod. It seems like my coils only last me a week and then they taste burnt. I vape on 60-70 watts and I also chain vape, I am a delivery driver so I can vape all day. I use the Rox - Cotton Candy juice. What am I...
  21. W

    Help with Ijoy RDTA 200W SS Coils. Watts and Temperature

    Hi. I have looked on the site a lot and found lots useful. So I decided to join to ask something I couldn't quite find in a search. I'll give as much info a possible so someone can help as best they can. .. I have an Ijoy RDTA 200W Box Mod .. Batteries - Dual Samsung 30q and dual Sony VTC5's...
  22. C

    Need help on finding the best ultrasonic cleaner or, cleaning prebuilt coils and Steeping as well

    Hello all, I'm on the hunt to find the best cleaner for coils that I have made since there's oil and other substances needing cleaning. I would like a cleaner that could stay ON for at least 10-15 minutes. I have the coil master ultra sonic cleaner but I feel like there's a better one out there...
  23. M

    what settings should I use???

    hi, im new to vaping and also forum posting, so just a FYI in case i posted this wrong anyways, i want large clouds from my vape so im looking for suggestions on what settings I should put on my vape I have a smok alien 220w and a smok tf v12 x4 thanks for all of your information in advance!
  24. R

    Sony vtc5

    so i want be really safe with my mech mod so i wont get hurt so is iT safe to use a 0,18 Ohm coil on a Sony vtc5 battery because i hear Some Guy's say yes and other say No So i like to hear iT from the experts
  25. villagernum1

    questions from an extreme noobie

    I have the Joyetech Evic Vt. My older brother passed it down to me so I'm not sure what the coil is nor do I know how to figure out what it is. When I look at the display, it says 60 Watts, 5.94 volts and 0,59 ohms. Is this a safe range to vape at?
  26. dmdb92

    Advice please!

    Hi all, I'm new here (brand new), and was just after some advice about what to buy. I am currently using an iStick Pico 75W, prior to this one I had been using the iJust S. I like the Pico but find the tank is too small and am having to refill it quite often. I would just go back to the iJust...
  27. C

    Urgent help on Hcigar VT Inbox DNA 75 Squonker Mod

    Hello everyone, I ask you guys with this urgent help. I just got my mod earlier today and was super excited to use it. Now, I have been using an Alien 220w mod and G-priv mod. This is my first time switching to a different mod so alien and hcigar are 2 different animals to me. Alien always had...
  28. S

    Aspire Plato

    hi! I just got this, I'm using the coil it came with and I don't know what to burn it at! I've been watching YouTube videos on it and I noticed the v number changes on mine but doesn't on theirs so I didn't know what was happening with that. I'm obviously new at this! HELP!
  29. C

    In need of help buying cheap pre-built coils

    Hello all! Anyone there know a vendor or a site that sells these spec of coils for cheap? 28gx2/36g 0.21 or 0.22 ohms per coil Stainless Steel Fused Clapton for 10 packs or so. Im aiming to buy it for $5 or less. If they offer Paypal, that would be awesome. Im planning to get cheap coils because...
  30. C

    In need of help finding a squonker regulated mod

    Hello all! I have been researching for days trying to find regulated squonker mods but i end up seeing it go sold out. I have no shame on saying this but this is my first time getting into squonking and i heard so many good things about it but too bad there isnt much option out there for...
  31. C

    Help with information on Geek Vapes GBOX S100

    Hello all! I am really curious and tried googling everywhere on an information on the capacity of the Squonker Bottle it comes with. Also, i would like to know if i can fit a Lukkos Silk with a capacity of 6.8ml or even a Cappy with a capacity of 8.5ml.
  32. J

    Need help wismec rx300 & tfv12 question

    So I have a wismec rx300 with a smock tfv12 what batteries should I use if I want to vape at higher 100 plus wattage
  33. R

    Help needed !

    Who using Tesla steampunk nano 120 watts . Can u set plain kanthal wire in Tcr mod ? I love the mod in Ss with temp mod 350 -500 degrees Fahrenheit . I got Goon Rda with Simple 24/26 gauge wire coils @ .2- .5 0hm build oh yeah . Nice in cool vapor lol .
  34. M

    Kanger dripbox 160 help

    I recently purchased a dripbox 160 and love it so far, but I am having some problems with it not getting all the juice in the bottle. Also when I pull the bottle out of the mod a white rubber piece is stuck in the bottle and goes down with it. Ive watched reviews of it to see if it was supposed...
  35. The Huntress

    Help The Huntress choose the next Vendor

    Vaping family. I'm a flavor chaser with a new addiction. I've tried Blacknote(excellent but not an ADV), Ahlusion(Smooth Criminal is one of my ADV's, reordering 180 mls this weekend), Innevape TNT(another love of mine, I'm sure it's the maple on the exhale), and The Plume Room(2 great ones but...
  36. V

    Vape Pens

    Hey guys I have got a mod but now I also want to have a device that is portable and I can easily put in my pocket. I am looking for a thin vape pen that still manages to provide good flavour and "decent" clouds and hasn't got such little airflow that I am getting a cramp in my cheeks. XD Hope...
  37. C

    Need help on finding the best flavor RDA and best vapor RDAs s currently

    Hello everyone! I know that this question has probably been asked a billion times but I just couldn't pin point the answer. So I currently need help on finding the best flavor RDAs currently and also best vapor RDAs currently as well. Well, mostly I'm looking for flavor RDAs but the vapor RDAs...
  38. S

    New vaper questions Help

    Hello, I decided stop smoking and switch to vaping. So i bought a target pro with a juice of u turn crunchy berry 3mg. On my first day i having trouble I have a burnt taste. I use pre-installed coil and use 20-30watts After that i follow in some guidelines on internet. I wick the coil etc...
  39. C

    Need help of which awesome pre-made coil to get with Reload RTA

    Hello all, I just ordered a Reload RTA by Reload Vapor and it's on it's way. I got this RTA because I heard it delivers awesome flavor. Now, I gotta admit and dont wanr to offens anyone but this is my first time getting an RTA and getting into premade coils and such, coming from vaping a sub-ohm...
  40. S

    Smok T-Prive Help

    I purchased a new Smok T-Prive today and I put the tank/atomizer/coil on, primed the coil, filled the tank and got about 2 or 3 puffs on it and it keeps repeatedly asking me if it is a new coil. I hit yes, and then when i look at the screen, my OHMs are at 0.00 and when I go to actually use it...
  41. R

    TFv8 Cloud Beast too much flavor???

    Hi, i recently purchased the TFv8 Cloud Beast for my Alien 220 mod with the Q4 coils, and i have been receiving too much flavor from my juices, i've tried all my juices on the tank but i still get way too much flavor and its overwhelming. Sometimes, ill even have to spit because the flavor is...
  42. N

    Help with Smok Alien 220w kit, v8-t8 coils and amp question

    Hi all, Just looking for some reassurance that I'm vaping safely with my Smok Alien 220w mod + v8-t8 coil. I've bought the Smok Alien 220w kit a few months ago and have been vaping with it without too much drama (except some leaking and spit back issues) using the Q2 (0.4ohm) coils. Yesterday...
  43. Vapeaid

    Need a reliable mod for work that wont break easily

    I work a 12 hour shift in a machine shop. It's a physical and dirty job, but at least we can smoke or vape inside. The screen on my alien broke at work a few months ago. I just got another one and I'm only using it at the house. Currently I'm smoking at work and vaping at home So I'm...
  44. St3zzY

    Rx 2/3 With Juggernaut coils (5 wrap)

    So right now im running a Rx 2/3 with dual Juggernaut coils 5 wrap and they kinda taste like shit to be honest doesnt have really any flavor any reason or tips how i could get more flavor??
  45. Monitoka

    Question on vape pens

    Ok, so I have vaped for a little while now and learned what I like and don't like and am looking for a new vape pen. I started off with the aspire starter kit and really liked it, but when the built in battery died it was a big bummer and so I tried my fiance aspire peguses. I do really like...
  46. G

    Can someone please help me figure out what kind of vape this is?

    Somebody gave it to me. anyone recognize it ? name ? brand ?
  47. Calebhardle111

    Smok qbox max vg juice??

    hello, I am 2-3 days new to vaping and have liked my juice so far, but I went into my local vape shop and bought MAX VG juice and noticed it was harsh on my throat and tasted slightly burnt with little to no flavor compared to my 50/50 mix juice. Am I doing somthing wrong? I have tried it at...
  48. C

    Alien 220W Problem

    UPDATE: I seem to have fixed the problem Ive had my alien for about 6 months now. Always been a great mod. Used the baby beast it came with for a while and eventually bought a pharaoh rta. Have been building for a while and absolutely love building on this thing. A few days ago while I was...
  49. E

    help with safe coil building

    hi, been using SMOK xcube ultra for a while but just bought my first mech mod and RDA, looking for some clarification on safe coil building before i try anything. first im using Sony VTC4 18650 2100mAh 30A batteries in a VGOD pro mech and VGOD pro drip RDA with 24g kanthal wire. I have used the...
  50. nezzaraffi

    Big Baby Beast - Coil Assistance Needed!

    Particularly new to vaping, but with a few knowledge. Currently own the SMOK Alien Mod with the Big Baby. Already used the pre-installed and extra T6 coil. Currently using RBA. I would like to know which coils would be suitable in case I need to change it? I know Clapton/Kanthal, but I would...

VU Sponsors

Top