help

Hello everyone, hopefully I can get some guidance. I had an unregulated dual 18650 box mod called the Block by cosmic innovations Well I lent it out awhile back to one of my friends and received it back today and the button is melted. I cannot take it apart at all (the button appears to be...

So i want to buy a vape and im wondering if when it arrives i will need to sign a signature. It ships via usps first class.

i have a Joyetech eVic-VT (not mini) with the tank that comes with it. My atomizer is at 1.09 ohm

Hi, I apologize for my idiocy but I'm having a problem with my month old vape, up until two days ago, it had a fine taste, it was all good... however I left it in my car and since I didn't want it to get too hot and get damaged somehow I threw a sweater on top of it and left it there for like...

I have vaped this x cube mini for a few months and now it is acting up. I use a dripper and sometimes overdrip but can my mod be saved. If you have a minute to watch my video you see how it is going crazy it would be much appreciated (sorry for bad english)

I have been using my Evic VTC Mini for 9 months now and have never had any issues up until this point. I have always used nickel coils but only had titanium left on hand so that is what I have in there now. Since I put in and primed my new coil it no longer allows me to use the temp control. I...

Hello, I just recently purchased a Pico box kit and it came with a Melo III Mini. I don't vape heavily I tend to keep it around thirty watts but just today I decided to amp it up to seventy-five watts (my box's max) and I immediately received an awful burnt taste. I've only had this tank for...

Last week I decided to cut cigarettes from my life completely, I'm pretty health conscious I eat extremely health and do crossfit 5-6 times a week. Cigarettes doesn't fit my lifestyle, however I started when I was 14 now I'm 32 and I smoked 1 pack a day. I've noticed the last two days, that...

Got this about a month ago, and have been using the CLOCC atomizer it came with. It is an MTL device so there's not that much airflow, but my question is - does this device only take those specific coils (CLOCC 1.5-2.5 ohms) or are there any other coils you could use with it, that may allow for...

It's too long to fit so I had to pastebin it. I hope this helps anybody who needs it, truly. ALTERNATE: https://pastebin.com/QgvPLmXT Added Info: WHAT TO BUY: Soldering shit: So this one is actually kind of hard when you have no idea what to look for. A lot of people will tell you to go...

I want to buy a vape. but what is a decently cheap vape that can help blow some clouds? I was looking at this one, but I don't know if it is for beginners or what! What do I look for? Any tips for newbies? HELP A BRO OUT!!!

I'm wondering where to buy online I live in canada

Hey all! I've launched a gofundme to help my father get his vape with the hope he quits smoking. Now I'm not here to ask for donations (or you can if you want i really appreciate it), more so to get some help, what's the best kit around 50$ to give for a person whos smoking for 43 years now. I...

Hello all. My name is Brian. I smoked cigarettes for 25 years and then stopped in 2001. Last year I decided to take up vaping when I heard about ***. I am not a crazy but when there are hundreds of clinical trials underway involving ***, there must be more than just "smoke and mirrors" to the...

I am new to vaping, I have a bunch of weird mods but the tank is an aspire cleito, whenever I try to hit it I get a loud gurgling sound and burning juice in my mouth. I tried switching the coils but t he first hit of the new one was the same, what do I do?

Hi guys new vape user here. I just bought my first kit and it included this. I didn't prime it properly and its burnt I think, and wanted to try and change the coil, but I'm finding it hard to open. I found some people also having problems opening it the first time. Any suggestions?

Hello, guys, i am quite new to vaping and I'd like to ask you a couple of questions. Yesterday, I bought myself a vape with the following configuration: 1) smok tfv12 tank (with preinstalled smok v12-t12 atomizer) 2) CigGo Praxis Vapor Banshee 150W TC box mod 3) 2x Avatar 2000 mAh 20A 18650...

Hello everyone I'm just about over a week into vaping again. A few days ago I was getting hot juice and vapor on my lip and tounge. I made a few adjustments and now I'm not the vapor is fine but I have been feeling like my lips are chapped. So last night my lip was hurting I thought it was a...

My fresh japanese cotton wicks keep tasting like Destinee Kellner's fungal infections, I don't know why and I keep gagging and almost throwing up.. *pic related* http://imgur.com/VJvEMgS

Hi I'm new with Vaping. I'm a bit curious about the Orbit Mod? Can you guys give me reviews about it? Thanks alot! I currently have Rx200 but I'm planning to purchase another one sooner.

Sorry guys, new here and my forum searches didn't yield any results. Basically I suck at wicking always have and always will. No matter how many tutorials I've watched, times I've tried, different types I've used, I always manage to mess up in some way shape or form. But, whilst browsing...

Hey guys! I'm very new to vaping and recently bought the Smok Stick V8 Kit at a local shop. First few days, everything was great no problems or complaints I was in love! Today, however, that horrible "gurgling" sound started really bad and it started spitting as well. I am guilty of leaving it...

so i just started building my own coils a few weeks ago and went from a single coil rda to a dual coil rda, and was wondering if for example i usually run my fused clapton as a single at 50w should i be running 2 at 100w to get the same performance out of each coil or will it perform the same at...

So i 3d printed my own box and i bought all the componets on motley mods and i bought a 16mm green momentary switch and most i saw most had 2 connections and i got mine in today and it has 4 pins i assume 2 are for power and the other 2 are for the led but i honestly dont know what pins do what?

So i 3d printed my own box and i bought all the componets on motley mods and i bought a 16mm green momentary switch and most i saw most had 2 connections and i got mine in today and it has 4 pins i assume 2 are for power and the other 2 are for the led but i honestly dont know what pins do what?

so i just got a vape pen, and there's this little hole in the tank, the instructions told me clearly to not spill the liquid in it, but i have seen others vape almost upside down. is it safe if some e liquid gets in there?

Trying to get a group started for people that like to vape and people wanting to stop smoking in the Cincinnati area. My name is Eric and my contact # is 513-288-6640.

So, i'm looking for a peanut butter that tastes very much like Jiff smooth. I've done very little with peanut butter, and am kinda in the dark. any suggestions would be a great help!

so i just got my tfv8 cloudbeast today. it was leaking out through the air intake a little bit so i grabbed the tank and screwed it on quite tight. Now when i try to fire my alien 220 it says ohms too low. but the mod won't recognize that there is a tank on it either. when i try to unscrew the...

Hi there .. I am glad that I joined this great forum first of all I created this recipe below and after I added my flavors to VG/PG base I accelerated my recipe steeping by doing hot water bath to my e-juice for couple of hours 2 to 4 hrs and I tasted my recipe it was yummy then I applied the...

Hey guys please help a fellow vaper please like/vote for my design on instagram by clicking on the link bellow if i win the competition i will be giving away 18 of the final product in a lucky draw (if you have liked my design please message me with your instagram name)...

Hi new to vaping about 2 weeks in. The first setup i had actually got stolen out of my car. The tank was a melo mini. Anyway wentt back to the vap store the owner took pitty on me and hooked up with hos personal smok alien 220w and i only had to buy a new tank. The tank i got is the cleito 120...

Hi new to vaping about 2 weeks in. The first setup i had actually got stolen out of my car. The tank was a melo mini. Anyway wentt back to the vap store the owner took pitty on me and hooked up with hos personal smok alien 220w and i only had to buy a new tank. The tank i got is the cleito 120...

I do a lot of sheet metal work, so I keep getting metal shavings in my mouth piece and then end up inhaling them. I get all sorts of other stuff in there too. Is there anybody who makes like a cap check valve or something? I have a hard time keeping stuff clean!

So..Im new to rebuilding and I was looking to make a parallel coil (Dual) and was wondering if it would split the resistance? twice since there is twice as much wire than a normal Dual coil build with only a single strand of wire? Im building with 22ga wire

So..Im new to rebuilding and I was looking to make a parallel coil (Dual) and was wondering if it would split the resistance? twice since there is twice as much wire than a normal Dual coil build with only a single strand of wire? Im building with 22ga wire

Hey everyone I Ben looking all over the web and can't find anything could anyone help me find were to buy a TFV8 glass replacement for the big baby beast? Thank you

Hey everyone first time actually posting in this forum. I apologize this is a little long. Well anyway, I'm gonna get right down to it. My RX 2/3 worked just fine yesterday morning. I put it in my backpack and left for work on my motorcycle. Everything seemed fine until I realized my batteries...

Hi everyone, I have seen a few related posts here but haven't been able to find a definitive solution. Recently I changed my flavor after cleaning the tank thoroughly and after placing everything back together, I tried firing up the mod but it gave me an error - check atomizer. Everything...

Hey guys, I bought a RDA Goon clone about a month ago and lately I started noticing that when I pull my wick out to re-wick I have this reddish colour where the coils were. Could it be rust from it being a cheaper version? I took the Rda apart and I cannot find any rusting or anything like that...

Greetings! I'm new here and new to vaping. My sigelei fuchai 213 fell from my table and the top part of it popped a little that you could see light passing through and the heating element (i think that is what it's called) Well, I guess you can call it a dent. It fell really hard that, the...

G'day, I am very new to this but so far do like it a lot! I bought myself an eleaf istick power 80w with an ijust 5ml atomiser. I am currently running a 0.27ohm coil at 26W. I have been going up and down on the wattage but still can't find a happy spot. It is very throaty and leaves a dry taste...

i have a kangertech subvod starter kit i got a couple of months ago and it's been having problems for a couple of weeks now. i can't currently replace the coils but i took it apart and rinsed it all off and cleaned out all the gunk with a q-tip. after i did that, the problem got worse. the hits...

Hey, first of all nice to meet ya all, first day in the forum. So heres my question: I am currently using a iStick Pico mod with a cubis pro tank. This is my first kit ever and I've been using it for about 3-4 months. I want to get started on rebuildable tanks because its cheaper in the longer...

So my friend has had this vape for some time now. I am extremely frustrated at his irresponsibility in knowing absolutely nothing about this rig, or vaping in general. For the longest time it has been used and we both do not understand anything about settings. I have tried before to do the...

OK I've been vaping a few months and mastered pretty much every type of coil I've tried to make with the exception of the staple staggered fused clapton, I can make the wire but as soon as it comes to wrapping it it simply will not bend around a bit at all!? I've come to the thinking that maybe...

Okay so I'm fairly new at bigger vapes like this my first one was a ijust 2 from eleaf that I have been and am currently using because I have no Idea what is going on with my new used one. Well I'm slightly figuring things out with it. I also bought the Lotus vape. I don't know too much about it...

Hi. So while purchasing some flavors, I copped some chubby gorilla empties because I had one before and liked it. So I bought a few 30ml, 60ml, and one 120ml. I also recently bought some lotus flavors as they were on sale at ecx and I LOVE natural fruit flavors. Reading through some threads...

Please help im need a new device I have had nothing but problems with my big baby beast. Through my experience with my other devices I like the drippers for home use and tanks for out and about, but am so sick of the pre-built coils. Because of the big baby I have a real sour taste in my mouth...

Is my juul battery supposed to movie around if not what can I do to fix it