Then like @jmoney426 said. Try lifting the coil a bit? If juice creates a temporary "bridge" between coil and deck....We all tight and clean.
Sent from my SM-G950U using Tapatalk
You are most welcome....I did offer to send the bridge with a coil but NOOOOOO!!!!, Mr. I got a box-o-coils from the dude.... J/K@BrewBear 's OCC bridge came today (Thank you sir! ) and I slapped in one of the Zombie Head shot coils... yeah they are definite into the trash coils lol
Great vape from it...but need to run it at nearly 42w just so it doesn't flood itself lol That is to hot for my liking...might as well fire up a tube mech again.
So Need some ideas on pre-made coils for the OCC around .7-1Ω so I can bring the wattage down to about 16-21w max
That will be next but i think its pretty high now i think its makeing contact with the deck . Even tho its locked its still jumpin ill tear it down tomorrowThen like @jmoney426 said. Try lifting the coil a bit? If juice creates a temporary "bridge" between coil and deck....
You are most welcome....I did offer to send the bridge with a coil but NOOOOOO!!!!, Mr. I got a box-o-coils from the dude.... J/K
I have the 1.?? coils SSOCC coils....never even tried it yet, gotta stop by the post office tomorrow to pick up the Comfort bridge.
I can tell you don't bother with the Kanger ceramic coils. They seem to require 40 watts at least to warm up.@BrewBear 's OCC bridge came today (Thank you sir! ) and I slapped in one of the Zombie Head shot coils... yeah they are definite into the trash coils lol
Great vape from it...but need to run it at nearly 42w just so it doesn't flood itself lol That is to hot for my liking...might as well fire up a tube mech again.
So Need some ideas on pre-made coils for the OCC around .7-1Ω so I can bring the wattage down to about 16-21w max
I once had a little (I mean very little) piece of metal causing jumping resistance, probably from re-snipping the coil's leg closer to the post. At least that's what I think it was. The other was a slightly loose 510 assembly holding the positive post in the deck.That will be next but i think its pretty high now i think its makeing contact with the deck . Even tho its locked its still jumpin ill tear it down tomorrow
Sent from my SM-G950U using Tapatalk
I can tell you don't bother with the Kanger ceramic coils. They seem to require 40 watts at least to warm up.
I tried really hard to find these but they seems to be OOS everywhere.
http://atomvapes.com/gceramic-vcc-coils-09ohms-kanger-tanks?tracking=558d8c64ad59a
Sent from my SM-G965U using Tapatalk
I think I'm going to grab some Nautilus coils and forego building on my BBs. The BVC coils have a ceramic wick option and if they last 2-3 weeks it may be worth the extra money to be hassle free.I once had a little (I mean very little) piece of metal causing jumping resistance, probably from re-snipping the coil's leg closer to the post. At least that's what I think it was. The other was a slightly loose 510 assembly holding the positive post in the deck.
No sir. Those are the gClaptons (0.5). They require too much power buy are readily available with a quick Google search. I was looking at the gCeramic (0.9) ones. No one seems to have them.These ones?
https://www.gearbest.com/accessories/pp_359600.html?wid=1451237
wait no, those were .5's
This could be possible but im prob gonna go the comfort bridge road aswellI once had a little (I mean very little) piece of metal causing jumping resistance, probably from re-snipping the coil's leg closer to the post. At least that's what I think it was. The other was a slightly loose 510 assembly holding the positive post in the deck.
What makes me believe its the inserts is iv had no trouble at all and as soon as i put it in theres trouble these inserts are metal they need to be delrin or something of that natureI once had a little (I mean very little) piece of metal causing jumping resistance, probably from re-snipping the coil's leg closer to the post. At least that's what I think it was. The other was a slightly loose 510 assembly holding the positive post in the deck.
No sir. Those are the gClaptons (0.5). They require too much power buy are readily available with a quick Google search. I was looking at the gCeramic (0.9) ones. No one seems to have them.
Sent from my SM-G965U using Tapatalk
Did you lift the coil to get it in or did you put a new coil in after you installed it?What makes me believe its the inserts is iv had no trouble at all and as soon as i put it in theres trouble these inserts are metal they need to be delrin or something of that nature
Sent from my SM-G950U using Tapatalk
Think he's taking about about an issue with the airflow restrictors but still a good thing to note on the DryPlug (or Troy plug, or TP our whatever y'all are calling em nowadays)Check the "510" in the BB for possible juice, wipe it clean, tighten the nut a bit more so the bridge makes a clean, full contact. The first time I used the TP (TroyPlug ) I noticed the tank was sitting a hair high. By tightening the nut, it will push the tank/bridge assembly down. That's all I got
What's that @derrickfosgate ?
I like the 0.5ohm ss316l SSOCCs @ 22w-26w... They have all read ~ 0.7ohm lol...@BrewBear 's OCC bridge came today (Thank you sir! ) and I slapped in one of the Zombie Head shot coils... yeah they are definite into the trash coils lol
Great vape from it...but need to run it at nearly 42w just so it doesn't flood itself lol That is to hot for my liking...might as well fire up a tube mech again.
So Need some ideas on pre-made coils for the OCC around .7-1Ω so I can bring the wattage down to about 16-21w max
That sounds like what some people were saying about the VapeShell, the inserts moving around!What makes me believe its the inserts is iv had no trouble at all and as soon as i put it in theres trouble these inserts are metal they need to be delrin or something of that nature
Sent from my SM-G950U using Tapatalk
How in the fuck did you find those? Your Google Fu is stronger than mine...
I like the 0.5ohm ss316l SSOCCs @ 22w-26w... They have all read ~ 0.7ohm lol...
Duhh! yep, I got it,....late, but I got it!Think he's taking about about an issue with the airflow restrictors but still a good thing to note on the DryPlug (or Troy plug, or TP our whatever y'all are calling em nowadays)
How in the fuck did you find those? Your Google Fu is stronger than mine...
Sent from my SM-G965U using Tapatalk
I'm out on OCC style coils. Too much airflow for me.Was on page 3 of Atom-Vape gCoil search... each link one by one, checking if they also had the .9's... came to that one and viola, baddabingbadaboom.
Now the site looks shitty, but they are located in Louisiana so might give them a call first
He has patience, grasshopper!How in the fuck did you find those? Your Google Fu is stronger than mine...
Sent from my SM-G965U using Tapatalk
Yeah I'm short on that these days. I reserve what I have left for my kids, not the interwebs!He has patience, grasshopper!
Yeah I'm short on that these days. I reserve what I have left for my kids, not the interwebs!
Sent from my SM-G965U using Tapatalk
These little restricter inserts there for the kayfun but fit perfectly in the exocet under the coilWhat's that @derrickfosgate ?
(If you've got the Nautilus bridge the 0.7ohm is a much better coil)Where are you guys buying the ssocc coils?
Sent from my Nexus 6P using Tapatalk
@jmoney426
@jmoney426
I'm almost 2 weeks in on my 0.7ohm Nautilus. Don't think it's ceramic. Great @ 18w-19w...
Found them at eightvape
That's exactly what I wanted to hear! Although I was under the impression that the newer version of the BVC coils are ceramic wick. Could be wrong though and my wife will testify that it happens often!@jmoney426
I'm almost 2 weeks in on my 0.7ohm Nautilus. Don't think it's ceramic. Great @ 18w-19w...
Found them at eightvape
I was all about my insiders (not MTL version) but i got lazy. I can't get as consistent of a vape for as long as i can get with a Nautilus coil.I have the 1.3 ohm (reading 1.44 on the BB) EUC coil with the MF MTL bridge and it is a perfect, tight draw at 12.4 ohms. I have to see how the Nautilus bridge is but I'm really considering a second MF bridge and saving the Insider MTL for a rainy day....or until I decide to use their "AFC" ring .
Are they kanger? Pink insulator?These I have are .5's and they read .55, it takes a grip of power to use them, and it floods @<40w... Gurgle gurgle
Hmmm... Dunno if anything 3d printed would hold up to the heat... I thought they went in the chimneyThese little restricter inserts there for the kayfun but fit perfectly in the exocet under the coil
https://dicodes-usa.com/svoemesto/fayfun-5-mtl-air-flow-reducer-kit.html?___SID=U
Sent from my SM-G950U using Tapatalk
The packaging is very vague. And i have 2 different packages... So who knows?That's exactly what I wanted to hear! Although I was under the impression that the newer version of the BVC coils are ceramic wick. Could be wrong though and my wife will testify that it happens often!
Sent from my SM-G965U using Tapatalk
If you look at the picture in the link, the two white delrin insulators are the reason I can not use the TP! One of them has a single AF hole, about 1 mm or less in diameter (great MTL for me), the other has 2 holes 180 degrees apart but same diameter as the single hole (about 1 mm).I was all about my insiders (not MTL version) but i got lazy. I can't get as consistent of a vape for as long as i can get with a Nautilus coil.
I have the the full MF bridge with MTL kit on the way also... But I'm more RDL honestly
Just read that they're all cotton. Thanks for looking though!The packaging is very vague. And i have 2 different packages... So who knows?
They are a sort of after thought for the K5 when people started saying it had too much air for MTL. They go in the tube under the coil and I can see how a slight movement would cause resistance fluctuations. I just made a "hillbilly" AF restrictor for my K5, a short coil out 24 g kanthal the fit snugly in the air tube and had a bit of a flair (2 wraps or so) at one end so I can have something to grab on when I remove it.Hmmm... Dunno if anything 3d printed would hold up to the heat... I thought they went in the chimney
Are they kanger? Pink insulator?
I wouldn't hold my breath, but I hope you get it on Monday, mine's been sitting at the Post Office for two days now.Ooh, Nat Bridge processed through NYC... might get lucky and see it on Monday!
And why i ordered the MTL kit ;p see if i can modify the plugs to accommodateIf you look at the picture in the link, the two white delrin insulators are the reason I can not use the TP! One of them has a single AF hole, about 1 mm or less in diameter (great MTL for me), the other has 2 holes 180 degrees apart but same diameter as the single hole (about 1 mm).
@jmoney426
I'm almost 2 weeks in on my 0.7ohm Nautilus. Don't think it's ceramic. Great @ 18w-19w...
Found them at eightvape
U DA MAN!!!!!!And why i ordered the MTL kit ;p see if i can modify the plugs to accommodate