Probably SS tip and button. Keep it simple and classic, you know?What material you going to get. I think brass or SS or ultem would look great on your mod.
Sent from my Nexus 6P using Tapatalk
Sent from my SM-G965U using Tapatalk
Probably SS tip and button. Keep it simple and classic, you know?What material you going to get. I think brass or SS or ultem would look great on your mod.
Sent from my Nexus 6P using Tapatalk
Yes sir.Probably SS tip and button. Keep it simple and classic, you know?
Sent from my SM-G965U using Tapatalk
Pretty much what I was thinking to do, and also fits my predisposition to DIY.Dowel, Dremel, Keychain, Slot, Penny/Washer, Epoxy, Deft, Sandpaper - Authentic & Original!
I may have an old wooden broom handle like 1.25" dia that I can chop down, shape smooth, and then cut a slot for the coin, and then super-glue it in.NP.. You might even find some graphite rod or tube.
Sorry to hear that it's not working for you.I think I need to let go of the Insider v1, Aspire BVC (not the Nautilus, well, not yet). If any of you guys and/or gals are interested, please let me know.
I want my BBs for MTL and these bridges have too much air for me. Yeah, I know, I like a very tight draw for MTL and so far the only bridge I found to my liking is the MF. Troy's TPs bring them close to what I like but I figured I'd let someone else enjoy them and I'll just order another MF kit.Sorry to hear that it's not working for you.
Why are you unhappy with it? Maybe we can help?
I've thought about enlarging the juice channels on mine with a dremel or file to help it wick faster, but have not done any hacks to it yet.
Arthritis in mine, as well - Claws until I make the first tea; they loosen up typing enough for a day at work. Left is about played-out for the day, now.Whatever I come up with I will share photos of the end result, but it may be a few days before I can do anything as my hand problems are acting up today...
Sorry to hear that you have hand issues as well.Arthritis in mine, as well - Claws until I make the first tea; they loosen up typing enough for a day at work. Left is about played-out for the day, now.
LOL. ...just wait until you start looking for panels and buttons. ....So the drip tip thing never really crossed my mind. Went looking for that JMK Busto-. Turns out a place local here in Canada carries them. Also turns out the tip is $40 Canadian.
Christ on a bike what have I done got myself into now.
I'm hoping for a Father's Day sale. I'll post here if there are any.So the drip tip thing never really crossed my mind. Went looking for that JMK Busto-. Turns out a place local here in Canada carries them. Also turns out the tip is $40 Canadian.
Christ on a bike what have I done got myself into now.
Looks just like mine. Maybe fasttech will be the only one to carry the DNA 60 usbHmm 3F's listing for the SXK USB-BB60 isn't all that appealing...
View attachment 113747
That doesn't look like the DNA screen lol
Looks just like mine. Maybe fasttech will be the only one to carry the DNA 60 usb
Sent from my Nexus 6P using Tapatalk
Hmm. Didn't somebody order one? I'm sure they'll let us know. I hope it's not bsHopefully...FT's listing doesn't show the screen either...and both 3F and FT list them as DNA60s
LOL. ...just wait until you start looking for panels and buttons. ....
Yea I about fainted.Saw a set last night in my interwebs travels. $400 or so I thought wasn't too bad of a price for a Billet Box and a set of panels with a button.
Naw son, $400 JUST for the panels.
Some of these panel prices will make your liver quiver and your bladder splatter. ....Yea I about fainted.
Sent from my Nexus 6P using Tapatalk
To charge more than the mod itself for a set of panels is ludicrous. 4DCB makes some beautiful stab panels but not for that kind of money.Some of these panel prices will make your liver quiver and your bladder splatter. ....
I'm working with someone now on doing acrilic... Stabwood is also an option he offered. Simple patterns in stabwood might be nice. No idea on cost yet but I'm thinking the acrylics will rrp ~$80/set.To charge more than the mod itself for a set of panels is ludicrous. 4DCB makes some beautiful stab panels but not for that kind of money.
Sent from my SM-G965U using Tapatalk
That will only work with the A-Tank if it's for the Atlantis.Saw this on FT:
Replacement Rebuildable RBA Coil Head for Atlantis Clearomizer $2.81
What do y'all think? Is it worth it?
Will it work with the bridge that comes in the kit with the SXK clone, or do I need to buy another bridge? If so, which one?
https://www.fasttech.com/products/0/10011577/3773000-replacement-rebuildable-rba-coil-head-for
It looks like they used the pictures from the 70W one!Dude on one of the BB FB pages just got the SXK USB-BB in...says and shows DNA60 etc.
Really wonder why 3F and FT not showing the correct screens...maybe a dumb photographer lol
It looks like they used the pictures from the 70W one!
Ah, Ok. Thanks for the confirmation.That will only work with the A-Tank if it's for the Atlantis.
Sent from my SM-G965U using Tapatalk
Yes they did, VVTF. There is a v1 and v2, not sure if they are still available.Ah, Ok. Thanks for the confirmation.
I wonder if they ever made a Natilus RBA head?
Yup! They will but be prepared to pay with Bitcoin, you will not be able to pay with PP or credit card.Ok. for those of you with experience with the Nautilus coil heads, I found this on FT, will this work in the standard boro with the Nautilus bridge?
Authentic Aspire Nautilus 2 Clearomizer Replacement Coil Head (5-Pack) 0.7ohm (18-23W) for $8
https://www.fasttech.com/products/0/10009799/6925000-authentic-aspire-nautilus-2-clearomizer
FT does not seem to have the 0.9 Ohm version of the same.
Thanks for all the info. I'm going to check some YT vids to see how they are put together and how the build is before going to search for one.Yes they did, VVTF. There is a v1 and v2, not sure if they are still available.
There will be a V3 coming out, look at their FB page. Usually they sell on ebay, I didn't find anything just now. Gear Wors....Best shows the v1 to be available in a week or so....YMMV
These things are tiny! Roughly the diameter of a #2 pencil. I did manage to put a very small clapton in one.Thanks for all the info. I'm going to check some YT vids to see how they are put together and how the build is before going to search for one.
Wow. That's odd. I wonder why that is. I have no Bitcoins as of yet, and kind of side-stepped the whole crypto-currency issue up to now.Yup! They will but be prepared to pay with Bitcoin, you will not be able to pay with PP or credit card.
All I'd need is to get 6-7 wraps, spaced ~1mm apart, of 26g Kanthal on 3mm ID and I'd be all set.These things are tiny! Roughly the diameter of a #2 pencil. I did manage to put a very small clapton in one.
That will be entirely too big for either rba.All I'd need is to get 6-7 wraps, spaced ~1mm apart, of 26g Kanthal on 3mm ID and I'd be all set.
That will be entirely too big for either rba.
FT has a deal (restriction?) or something with Aspire, but there is a way to sidestep it. You guy something of equal value, pay with PP and a few minutes after the order goes thru, you cancel it. Ask for a gift certificate instead of refund ( I think you may be able to buy a gift certificate at FT now, but not sure) and pay for the coils with the gift certificate.
I'm working with someone now on doing acrilic... Stabwood is also an option he offered. Simple patterns in stabwood might be nice. No idea on cost yet but I'm thinking the acrylics will rrp ~$80/set.
Yea it wouldn't be bad to check them outI would like some clear acrilic
Sent from my SM-G950U using Tapatalk
They are Galaxies DT, and they fit nicely but do not shroud over the top nut. If a nut that fit flush were to be found (how about it @So619Cal ) then they would work perfectly.also in that email were these drip tips in frosted clear, ultem and black for $3 ea. that might be good for folks who want a drip tip that hides the 510 key on the BB:
http://www.3fvape.com/drip-tip/2404...r-galaxies-mtl-rda-transparent-pmma-16mm.html
http://www.3fvape.com/drip-tip/2214...ip-for-galaxies-mtl-rda-yellow-pmma-16mm.html
http://www.3fvape.com/drip-tip/2214...-tip-for-galaxies-mtl-rda-black-pom-16mm.html
Yes, that's what the above dt are.Can a standard 510 drip tip be used on BB?
They are Galaxies DT, and they fit nicely but do not shroud over the top nut. If a nut that fit flush were to be found (how about it @So619Cal ) then they would work perfectly.
Yes, that's what the above dt are.