My clicker finger just took control --- damn it.
Lost Vape Therion BF Squonker DNA75 Kit -- ordered
If you are just starting out, and understand mech's, I would buy a CopperVape squonker. You can get the watts with a good battery and coil which performs real nice, especially considering the cost.Decent? Should I be looking at a better one?
We usually vape VW between 35-55w
So far I'm looking at these:
Lost Vape Therion BF Squonker DNA75 Kit
ShenRay Hadaly Style RDA (Clone)
Never researched the mech's yet --- still very intimidated by them. Those are a future en-devour.understand mech's
I like the easy (new) coiling method of the LP Goons.....I just got two of last run's Goon LPs in some luscious vape mail yesterday - waaaaa
I'm trying to decide which is best, Hadaly or Goon LP for flavor
It's almost a draw I'm thinking
Good choice...!Never researched the mech's yet --- still very intimidated by them. Those are a future en-devour.
If you are just starting out, and understand mech's, I would buy a CopperVape squonker. You can get the watts with a good battery and coil which performs real nice, especially considering the cost.
I'll add it to my next week's allowance, just so that I have it. I'll have to read up on Mech's before using it though.CopperVape
I'll add it to my next week's allowance, just so that I have it. I'll have to read up on Mech's before using it though.
EDIT: Damn -- only $30 from gearbest --- that is a nice price!!!
enablers --- FT order done.
Lost Vape Therion BF Squonker DNA75 KitWhat all did ya get tonight
Has anyone seen or managed to get hold of the GBOX S100 by GeekVapes or Movkin Disguiser with squonk kit
Staying on the dual battery theme here both of these mods offer that just wondering how they would compare to the Dripbox 160 as I've recently found out the centre pin is located in a really crap place which means RDAs will overhang if over 22ml in diameter
Trust me, so was I. I almost did the Kanger, but my thinking is if I DO like it it will be a damn good unit. If I don't like it, it should sell easy, or just an expensive paperweight.@PhantomOp that Therion BF looks awesome awww man I'm torn
Trust me, so was I. I almost did the Kanger, but my thinking is if I DO like it it will be a damn good unit. If I don't like it, it should sell easy, or just an expensive paperweight.
Sent from my XT1650 using Tapatalk
Will do!That's the spirit! Hahahaha well since your gonna be getting all of your bits before me please let me know your thoughts I'd be interested to know Especially how each of those mods perform
Also @JuicyLucy i noticed above you have the clone and authentic hadaly is there any difference in quality and taste?
That's the spirit! Hahahaha well since your gonna be getting all of your bits before me please let me know your thoughts I'd be interested to know Especially how each of those mods perform
Also @JuicyLucy i noticed above you have the clone and authentic hadaly is there any difference in quality and taste?
Yes pleaseI have the authentic and three of the SXK clones. The biggest difference on how it affects your builds is that the top clamp on the clone is shorter and angled differently - just enough to keep some people being able to put in dual coils with the bigger wire. Some have reported having a hard time even with single wires.
I'm sure there is a difference in how the air chambers are offset, because on the clone, I vape with it wide open. On the authentic, I shut the air flow in half - and I am not a fan of airy vapes and like my draw to be a little restricted.
There are many cosmetic differences, but not really worth mentioning here.
Taste is almost the same on them, I find the authentic a little "Juicier" - I can' t think of another word to describe it.
I have decent deck photo comparisons if anyone is interested.
^ ^ ^interested
You could actually take a dremel sanding disc to the clone clamp and thin it down a bit. It is thicker than the authentic.top clamp on the clone is shorter and angled differently
You could actually take a dremel sanding disc to the clone clamp and thin it down a bit. It is thicker than the authentic.
Bombertech is working on the V2 version of the Pindad and said it will be 24mm and hold 4 to 5 ml!I got one yesterday and really like it, it holds 2ml of juice and comes with a bf pin so depending on your Squonker bottle capacity it's a win win. I wish it came in a 24mm, but for being a 22mm it kicks butt. And it's price is affordable, $49-50 for SS, and $55 for black. Varitube has it here in the States
http://www.varitube.com/PinDad-Drip-Tank-by-BomberTech_p_418.html
I ordered a CoV Wraith and Goon LP yesterday. Can't wait to get my squonk on.
Sent from my iPad using Tapatalk
I ordered a CoV Wraith and Goon LP yesterday. Can't wait to get my squonk on.
Sent from my iPad using Tapatalk
With that RBA/Atty, I really like Clapton and Fused Clapton coils. You got the supplies there to do them also.
Fitting in a 3mm ID coil can get pretty tight, I might move it down to a 2.5mm ID.
Here is a good simple micro coil.
(2 Coils) 26g @ 2.5mm ID -- 9 wraps :: approx .6ohm p/coil (.3ohm total)
Also, here is a wicking tutorial that I put together for that specific atty / rba coil.
http://vapingunderground.com/threads/smok-big-baby-beast-baby-beast-rba-wicking-technique.300259/
Yes, twisted wire will give you more surface area for sure. The more surface area of the coil, typically the more flavor you will get.Cheers matey ...Seen a lot of people rate twisted as well? Doesn't seem difficult to do either are they better than plain coils taste wise was thinking either 26 or 28 for them
@UncleRJ hmm tricky one that if it's all preinstalled for you it's gonna be a PITA to take apart, soaking in alcohol or boiling it might help? heck every T8 coil I put in tastes gash to begin with could just push through it?
Otherwise it's a case of take wicking out dry firing coil and re wick yourself just my thoughts I'm no expert by any means
Indeed, I don't care for the squonk option.@The Cromwell has a Disguiser, I think @inspects does too
@KingPin! --- DON'T BUY A DNA75 MOD!
http://vapingunderground.com/threads/squonkers-are-bonkers.183977/page-65#post-1555426
Thanks inspects so sights set back to the Dripbox 160 phew ....what with phantoms therion not working and all makes life easier to choose againIndeed, I don't care for the squonk option.
One question though guys is it normal for the ohms to jump that much when heating the coil?