As someone who's new to the BB world I have what the rest of you may think is a dumb question.....it looks like the Rev.4b has been out for a while, anyone think we'll see a new Rev. in the future?
I even went as far as asking them if they plan on a Rev4 with a usb port! They're not planning on it !As someone who's new to the BB world I have what the rest of you may think is a dumb question.....it looks like the Rev.4b has been out for a while, anyone think we'll see a new Rev. in the future?
Thank you, going to give them a shot.Yes I got a 3 pack of them off ebay for $15, 3 different air inserts from MTL to DL, I am using the MTL and it keeps my BB dry as a bone, best accessory I've bought for the BB.
They sell things on their website as well.Can you find FF stuff anywhere besides Facebook? And I really wish I'd have got the gold inner plates when they were available. May just buy another BB at some point. Ugh I had 5 at one time.
They do drops on their website but on Saturdays. It can be kind of sporadic though. Eddie uses the FB group to announce when they're coming though.Can you find FF stuff anywhere besides Facebook? And I really wish I'd have got the gold inner plates when they were available. May just buy another BB at some point. Ugh I had 5 at one time.
Can you find FF stuff anywhere besides Facebook? And I really wish I'd have got the gold inner plates when they were available. May just buy another BB at some point. Ugh I had 5 at one time.
I think you can adjust that from the other side. Let the elder BB users explain that though as I've never had to do it. I have dedicated batteries that I put a piece of scotch tape on and make a grab able tab to pullFirst time playing around with a BB, man the battery is tight in there. Aside from a ribbon, any tricks you guys use to get the battery out? Banging the mod and my hand like I used to do with my mechs doesn't budge it.
Take these 2 bolts out and you'll be able to take the negative contact out. Squeeze it gently, but firmly with some pliers. I do that to all mine.First time playing around with a BB, man the battery is tight in there. Aside from a ribbon, any tricks you guys use to get the battery out? Banging the mod on my hand like I used to do with my mechs doesn't budge it.
Thanks man! Gotta go find a driver to fit those bolt heads now, lol.Take these 2 bolts out and you'll be able to take the negative contact out. Squeeze it gently, but firmly with some pliers. I do that to all mine.
Sent from my SM-G950U using Tapatalk
Thanks man! Gotta go find a driver to fit those bolt heads now, lol.
I appreciate the info
Hey man I just saw a 2018 nugget being waffled right now so they do exist. Still not sure on 2019Thanks man! Gotta go find a driver to fit those bolt heads now, lol.
I appreciate the info
I emailed BB, but haven't heard back yet. Good to know they still exist, thanks for thinking of meHey man I just saw a 2018 nugget being waffled right now so they do exist. Still not sure on 2019
Sent from my SM-G950U using Tapatalk
thats pretty sweet... I'd set it to a tad deeper on the timer of the rear legs to match the mane of the lion, or was the die not set in perfectly level and plumb?Did a test at work today on the laser engraver. The pin it's on is .340 in diameter and I'd go to .420 on my button so it should look pretty good. Might do it tomorrow
Sent from my SM-G950U using Tapatalk
I think the mane had more detail so the laser went over the same spot a few times making it wider. That was only 3 passes of the laser making it about .002 thou deep.thats pretty sweet... I'd set it to a tad deeper on the timer of the rear legs to match the mane of the lion, or was the die not set in perfectly level and plumb?
Only 4 pounds? That should last you....what? four, five weeks tops! You'll be a jittery mess, but what a coffee!I have 4lbs of Sweet Sweet Baby Jesus Bird Rock Yellow Honey Process Pacamara due to arrive today...
This would be a lot simpler, not to mention it's a better teamI think the mane had more detail so the laser went over the same spot a few times making it wider. That was only 3 passes of the laser making it about .002 thou deep.
Hope that makes sense. I'd show the original picture but it's on my work computer. Hopefully making the whole thing larger will bring out more detail.
Sent from my SM-G950U using Tapatalk
https://www.birdrockcoffee.com/collections/roasted-coffee/products/yellow-honey-pacamaraOnly 4 pounds? That should last you....what? four, five weeks tops! You'll be a jittery mess, but what a coffee!
Now you got me looking for it
Thank you for the link, I've been looking to find something different than my Caribou whole bean. I got a grinder from my wife for a present awhile ago and haven't touched Foldgers much since lol.
I've been rolling with some Hawaiian Kona coffee JuicyLucy sent me when she was on the island. Really hoping I can keep that going once she moves there. Grown around volcanos makes it so rich. One I love is called Volcanica. Some great stuffYumm, I truly like this coffee...can’t wait for the Red Honey to come back...nab up 10lbs of the stuff
Sent from my iPhone using Tapatalk
Look at that. Gonna be nice.Did a test at work today on the laser engraver. The pin it's on is .340 in diameter and I'd go to .420 on my button so it should look pretty good. Might do it tomorrow
Sent from my SM-G950U using Tapatalk
I've been rolling with some Hawaiian Kona coffee JuicyLucy sent me when she was on the island. Really hoping I can keep that going once she moves there. Grown around volcanos makes it so rich. One I love is called Volcanica. Some great stuff
That guy is retired, but that was a good one!
Damn nice!!! Wish I had a guy lolMy guy who owns a shop in Toronto knew I was looking and messaged me this morning. It was a nice day for a drive anyway.
View attachment 143224
Lol!Damn nice!!! Wish I had a guy lol
Sent from my SM-G950U using Tapatalk
Looking good man! I did DL with my first round of with the SXK clones. I definitely prefer them MTL, but it's cool that you can swap out your Boro and have a completely different vape.Have never used this BB for dl. Feels wierd to not have a tight draw. But working well so far
Only thing I don't like is I can get it to make contact with the condensation plug in there. Hmmm. Oh well ill keep a good eye on it. First refill is the one I'll de3be cautious with. BB Always floods after the first fill for some reason. LolLooking good man! I did DL with my first round of with the SXK clones. I definitely prefer them MTL, but it's cool that you can swap out your Boro and have a completely different vape.
Sent from the Death Star
It's either the tip or the clone VapeShell. My money is on the tip since the outer edge of the acrylic stops it from screwing down further like the 510 nut.Only thing I don't like is I can get it to make contact with the condensation plug in there. Hmmm. Oh well ill keep a good eye on it. First refill is the one I'll de3be cautious with. BB Always floods after the first fill for some reason. Lol
Groups just have to age verify members, the restrictions are to make sure nobody under 18 are buying. If the group is too lazy to verify or doesn't have the ability, then they'll close. I see the ones that close up on fb, coming back to the forums.Looks as though the FB vape group bubble is about to burst, folks.
Groups are being taken down bc of FB's new, more stringent, policies on tobacco, vape, and alcohol related content. They're able to appeal but I can't imagine all groups will survive that process.
Sent from the Death Star
They should all just move to Reddit honestly. My only issue over there is the use of external Imgur links to post pics. Annoying.I would guess the buy sell trade classified ad type groups are toast. Some others may survive on the down low...
Probably a good idea there. We'll see if any of the added 18+ or group type changes work when the hammer drops.They should all just move to Reddit honestly. My only issue over there is the use of external Imgur links to post pics. Annoying.
Sent from the Death Star
I thought about that the other day when I first heard the new policies. A lot of lost moneyLooks as though the FB vape group bubble is about to burst, folks.
Groups are being taken down bc of FB's new, more stringent, policies on tobacco, vape, and alcohol related content. They're able to appeal but I can't imagine all groups will survive that process.
Sent from the Death Star
Nah he's got enough blindly devoted fan boys to keep him afloat. Besides, his profit margins on those China made mods must be pretty goodY'all mean to say this is gonna hit Mr.Gooberbutternuts in the goobers?
Who is GooberFuckNuts anyway?Nah he's got enough blindly devoted fan boys to keep him afloat. Besides, his profit margins on those China made mods must be pretty good
Sent from the Death Star
Makes me a sad panda. I think Mr meowgi said the same thing. Might be cuz we're poor and have clones.