Well I did say did and not does
that still amazes me. smok, ijoy, wismec, joyetech all some of the biggest mod makers and none center their 510 pins.The price is good. But i agree, that off center 510 kills it for me. Too bad, I like the screen on it.
that still amazes me. smok, ijoy, wismec, joyetech all some of the biggest mod makers and none center their 510 pins.[/
it must just be a preference, I prefer 510 on sides, if it was in middle I probably wouldn't get it , but I'm looking to replace alien and I love how alien feels in my hand so I can't wait for this to drop!that still amazes me. smok, ijoy, wismec, joyetech all some of the biggest mod makers and none center their 510 pins.
it's preference for sure, but it mostly stems from people with larger tanks (28mm+) that would sit flush on centered 510 pins and don't on the offset ones. it also seems to limit the way they makes tanks as you don't see smok, ijoy, wismec etc making tanks larger then 26mm at the baseit must just be a preference, I prefer 510 on sides, if it was in middle I probably wouldn't get it , but I'm looking to replace alien and I love how alien feels in my hand so I can't wait for this to drop!
Gotta be a schematic issue, or all the companies would be doing it. Would you be willing to pay more $$ just to have the 510 in the middle? It's not that big of an issue for me. Price point wise, this is a great MOD. Can't wait to get mine.
Sent from my HTC 10 using Tapatalk
The Predator will fit a 28mm tank!it's preference for sure, but it mostly stems from people with larger tanks (28mm+) that would sit flush on centered 510 pins and don't on the offset ones. it also seems to limit the way they makes tanks as you don't see smok, ijoy, wismec etc making tanks larger then 26mm at the base
One of my favorite mods…. For all the wrong reasons.If atty size is an issue, here's a MOD that can handle the largest, with 510 on the side.
No 30mm thoughIf atty size is an issue, here's a MOD that can handle the largest, with 510 on the side.
That's good but I'd like to see more that can fit 30 personallyThe Predator will fit a 28mm tank!
Sent from somewhere in Vietnam.
I'm with you on that since I have 2 30s on the wayThat's good but I'd like to see more that can fit 30 personally
Sent from my SM-G935V using Tapatalk
One of my favorite mods…. For all the wrong reasons.
It proudly advertise that it is designed in Singapore. But Vaping is ILLEGAL in Singapore. Even in the privacy of your own house.
So were they Breaking the law during its design and development?
Sent from somewhere in Vietnam.
I didn't get shit for my gold oneI got a tracking # from vapenw for the red predator. Looks like I might have it by this weekend!
Will post pics and thoughts once I have had a chance to mess with it.
Sent from my SM-N910P using Tapatalk
Sorry mang, hope they get it out soon.I didn't get shit for my gold one
Sent from my SM-G935V using Tapatalk
I got an email saying it was in stock at 6pm, site says out of stock. No shipping notice lol FML I should have went redSorry mang, hope they get it out soon.
Sent from my SM-N910P using Tapatalk
I got an email saying it was in stock at 6pm, site says out of stock. No shipping notice lol FML I should have went red
Sent from my SM-G935V using Tapatalk
I wonder if FT and GB are using new systems; my last 5 orders have been delivered to me in under 14 days. Can't complain on that at all.FASTTECH just shipped my (silver/black) Predator Kit this morning! Looking at 7-10 days before I get it. The other colors are next day shipped (or they were) if anybody is interested.
Sent from my VS985 4G using Tapatalk
I had great service from FT. However, I ordered mine from VapeNW. Cheapest price I found.I wonder if FT and GB are using new systems; my last 5 orders have been delivered to me in under 14 days. Can't complain on that at all.
Damn! Not a fan of the flaring design but I love how that battery pack is designed. Like changing a battery in a camera. Can't get much safer than that.
Are these a standard off-the-shelf battery, or are you stuck with just this style for this mod? Kinda limits your options.
Great review! I also received mine today, and so far I am very pleased with it. VapeNW has been amazing for me so far. I also purchased an Alien from them and received very quickly.I just got my Predator kit. The mod is a thing of beauty.
Perfect finish, no rattles, The 510 is perfect and engages early with lots of spring feel/travel, and utilizes TC/TCR nicely.
2 hours in, the tank is delishimus. I'm using the .25 NS head. (BTW, does anybody know what an NS head is?)
A major plus is the sliding top fill design. There is none of the typical flex found in similar rotating top-fill solutions like Smok and Bachelor. This appears to be a superior design that even has a spring bearing to click the sliding top neatly into place so it won't come open even if you forget to lock it in place by pushing the DT down.
It is flat out slick.
So far, no cons but I'm not sure if I'm gonna be a fan of un-threaded coil heads... no threads top or bottom...
Visually, it's the same basic head design as the Vaporesso, but twice as big.
I'm vaping it at 60 watts with the air half closed off... and that's still a lot of air.
I gotta admit, it tastes great.
Also one gripe... Wismec has chosen to withhold the coil material info from the public. I can find no documentation of any sort (even on the interwebz) as to WTH kinda wire is in EITHER of the 2 available head types!
And on a side note.... Fasttech is still, after all these years, the same inept business they've always been for me.
I pre-ordered from FT who promised to ship on the 20th.
On the 22nd, I still hadn't received shipping info so I looked online and saw that US sellers already had them in stock.
So I cancelled my FT order and ordered from VapeNW... The mod came today.
Oh hey, I just got a shipping notice from Slowtech!
It seems they didn't see my cancellation and sent the mod anyway.... Never again.
dam that sucks. hope they take care of you quicklyI got mine in today
I got all of two puffs then screen went dark
Waited about an hour put battery's back in it worked for two more puffs lol
Looks like the board is over heating
Called where I got it from they say they going to send me a shipping label so they can repair or replace
Got a feeling that one's paint won't peel like the alien's did.
One thing I can tell you about the smaller threaded coil is that it is the same coil as the Amor+ and Reux Mini coil and I'm pretty sure the Vicino tank.I just got my Predator kit. The mod is a thing of beauty.
Perfect finish, no rattles, The 510 is perfect and engages early with lots of spring feel/travel, and utilizes TC/TCR nicely.
2 hours in, the tank is delishimus. I'm using the .25 NS head. (BTW, does anybody know what an NS head is?)
A major plus is the sliding top fill design. There is none of the typical flex found in similar rotating top-fill solutions like Smok and Bachelor. This appears to be a superior design that even has a spring bearing to click the sliding top neatly into place so it won't come open even if you forget to lock it in place by pushing the DT down.
It is flat out slick.
So far, no cons but I'm not sure if I'm gonna be a fan of un-threaded coil heads... no threads top or bottom...
Visually, it's the same basic head design as the Vaporesso, but twice as big.
I'm vaping it at 60 watts with the air half closed off... and that's still a lot of air.
I gotta admit, it tastes great.
Also one gripe... Wismec has chosen to withhold the coil material info from the public. I can find no documentation of any sort (even on the interwebz) as to WTH kinda wire is in EITHER of the 2 available head types!
And on a side note.... Fasttech is still, after all these years, the same inept business they've always been for me.
I pre-ordered from FT who promised to ship on the 20th.
On the 22nd, I still hadn't received shipping info so I looked online and saw that US sellers already had them in stock.
So I cancelled my FT order and ordered from VapeNW... The mod came today.
Oh hey, I just got a shipping notice from Slowtech!
It seems they didn't see my cancellation and sent the mod anyway.... Never again.
One thing I can tell you about the smaller threaded coil is that it is the same coil as the Amor+ and Reux Mini coil and I'm pretty sure the Vicino tank.
You're right the lack of coil info is truly stunning, here is what it says (or doesn't) on the Wismec site:
High Power Atomizer Head: Made of pure cotton wick, the 0.2ohm triple coil will make you enjoy the wonderful vapor and flavor to the maximum.
From the Wismec site Amor+ product page:
so all I can assume is that the 0.2 ohm triple coil is Kanthal...or at least NOT Ti or Ni200
I'm with you. Ordered mine last month as it can hold a 30mm tank.Hey not to hijack, but I see a lot of people wishing for a centered 510. Check out the sbody droid. Centered 510, fits 25mms no problem, DNA 250 chip. Incredibly well built and you can find it for under 100 bucks. Back to your thead, sorry to interrupt.
Hey Traveler. The 26650 sbody model, 30mms no problem. The dual 18650 sbody droid model, only up to 25mms without overhang. I was referring to the dual 18650, as it is in line with form, etc to the Wismec, SX Mini, ect. To me it is just higher quality than the Wismec, without the overpriced nature of YiHi.I'm with you. Ordered mine last month as it can hold a 30mm tank.
Oh, and I have a predator on the way too!
Sent from somewhere in Vietnam.
Hey Traveler. The 26650 sbody model, 30mms no problem. The dual 18650 sbody droid model, only up to 25mms without overhang. I was referring to the dual 18650, as it is in line with form, etc to the Wismec, SX Mini, ect. To me it is just higher quality than the Wismec, without the overpriced nature of YiHi.