It may kick your ass but you might be the one saveing my ass in the long run! Good luck in med school. I know that shit isn't easy/cheap.
Just thought about this to. Have yall ever tried building on a 454 big block? I always had a pain with mine and that damn negative plate so i sold it.
Bastard! Lmao. Perfect thoughSorry, I couldn't help myself.
The posts look identical to that of the aeronaut, other than the the fact the aeronaut's run parallel to eachother. I can tell you now the leads do no move as you're tightening. While any other rda I've used has the bolts coming into direct contact with the leads I made a habit of leaving my screwdriver or drill bit in the coil, just so when the bolts started trying to spin the lead the integrity of the coil wasn't compromised. With this design, again essentially identical to the aeronaut, the bar on top simply increases the downward pressure on the lead as you tighten the bolts, as opposed to the bolts "turning" the leAd. I personally regard it as a superior design, especially when I decide to stuff coils with 3 or more cores, staged claptons and so forth. I think I'm gonna have to pick this up in the distant future. Hopefully they come out with a clone.
Yup.
I like the Drip Tip, Screws, and Gold Plated Deck on the V1.5 and V2...but thats about it. I wish I could buy those screws and then I wouldnt even bother with a Petri
It's not that there's anything specifically special about it. It's just that they got everything right. Perfect sized air holes. Perfect sized body. Extreme attention to detail and quality. They just got everything right for the perfect vape.
Best of Both Worlds (Airflow and Flavor) while using a Two Post Design are:I just want a 2 post atty. But I don't want tons of airflow anymore lol I've changed my vaping status lately from my mutation x being fully open to only having the first row of airflow open. I get the dense clouds and it gives me a good platform to pratice cloud chasing on
sent from a dumb operated smartphone
This is how I've been running my cube rda with 24/34 fused claptons 5 wraps on 2.4mm came out to .13ohm running her at 95 watts
Yes, the Griffin has a cult following... The cult of people who are right. If you are a big build RDA user and don't like the Griffin, you're using it wrong!
There we go! Lol y'all here are bad on my wallet damnit!
I found one thing I could nitpick, the orings around the tank don't stick in their grooves very well, so you have to watch them when you dismantle it... that's the extent of what could be complained about that I could find. Pretty solid to me, hell that may just be me being unlucky with a bum set of o-rings as I haven't tried the others they provide with it (think I might switch to the green tonight to match my new Lime juice... it's so good!).
Does it leak/flood easily? My wicking needs some help
I run mine wide open. I loved my Griffin with the broken baseand really love it now that everything works as it should. Easy to build on, no leaks, good size tank, and good airflow. Looks dead sexy too.This is the airflow on my Griffin
| {▬▬▬▬▬══} |
Damn it, I just made a Griffin deck in Alt Key Codes and it doesnt work on this forum...
Nope, it's actually scary how little wick you need for it. I have less than 10mm of wick coming out of the coils, just gently tucked into the juice wells and voila perfect.Does it leak/flood easily? My wicking needs some help
sent from a dumb operated smartphone
Fuck that...I would rather have a Smok TFV4 Fill up, I actually dont mind filling the Griffin the way it is now though. Those holes type fills like Innokin's and Uwell's Rifiale Tank look like horrible designs, spilling and leaking and overfilling especially with high VG juice...
I really hope they pick up that label somewhere in their advertising. "The Coilporn RTA" because it seems to fit so perfectly. Hopefully it performs well too.
Mine had only flooded once. I didn't close off the juice flow control when filling it and it leaked. Nothing other than that. I had problems leaking too and then I watched the video by rip and haven't had a problem since.Does it leak/flood easily? My wicking needs some help
sent from a dumb operated smartphone
I'm the opposite, the screw cap is my favorite, I guess I could say they should have added some fins for grip on the cap, but I don't have any issues. I've had a couple top fills and all the others have the potential to rattle and open in my pocket, not this thing.
ooo New Pistol huh?
I posted a link to a sale on the Griffin. $24 shipped. Look back some posts and toot will see it.
Saturday if my "delay" passes without incident. I figured I'd get delayed but I'm still legally aloud to own/buy guns but I have a dropped class d felony on my record. The nics system will automatically kick back a delay for me forever more.
I had a delay just due to the amount of people buying right now, just like last year...had to wait almost a week to get it. Usually I can walk in and out carrying something new in less then 15 minutes...
If I had a ltch I could walkin and out in 10-15 but I can't apply for a permit for 5 more years due to a screw up. I ened up getting a misdominer that related to having a loaded pistol in the car with me. So basically carrying witout a license. Gotta wait 6 years from the date of arrest and I can pay to have that expunged
That sucks for you man....I dont have anything much on my record..but I have had a few attempts for Suits for cyber vandalism/Breaking EULA's and more.
Indiana is just a "no street sweeper" (sbs) everything thing else is just common sense style laws other then waitin for the ltch being approved
I'll have to give mine a 2nd chance. I only ran one build in it so far (a dual framed staple build) and it was quite warm. Almost hot. Definitely uncomfortable to vape. I'm gonna try an alien in the Griffin, so maybe I'll make a set for the Indestructible, too.
If you hold a FFL or paid your stamps and did you Form 1 and 4 for it then yes...Federal Laws still is game man..
