CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Yes, but I prefer to stay with 24mm or less. Anything larger than that starts to become obnoxious, IMHO.
Become a Patron!
LIMITLESS PLUS
- Thread starter ej1024
- Start date
LuTang
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
same here. i have no desire for anything larger than 24-25mm. same with mods. for some reason, i'm not down with 26650 or triple 18650 mods. single and dual 18650s are about as large as i want to go. 80watts is about the max i push and don't feel the need to go any higher. i'm a simple man whos happy with 24g SS straight wire or basic claptons.
Don't forget that a 24mm RTA with a 16-17mm deck and a 24mm RDA / genny style RDTA are not the same thing.
So I made a pair of 26/34 staggered fused.
Not perfect but getting there.
PITA to make but worth it.
7 wraps came out at 0.28 and running it at 80-90W.
Is it better then the Supreme and the Avocado24? Most definitely! Better vapor, better flavor.
Is it better then a good RDA? Close but not quite there yet.
I have been running my Limitless Plus empty. I use exactly like an RDA - with no leaking as a bonus. This RTA is a beast. I could fill it up but meh ... I don't even bother. I'm running fused claptons at around .24 at 80 watts. Great taste and clouds ... I have it about 1/3 - 1/2 open. It competes with any of the RDAs I own. I have the black bandanna version that @Pancho_Brown sent me.
I swear I do not know where I'm going wrong trying to wick this thing! Dry hits galore......I'm cutting the cotton bacon even to the top of the glass, it will work if I vape standing on my head? Is this the way you have to use a Gennie tank by always keeping it inverted? What about dropping the wick into the tank?
BTW running homemade juice, max VG on dual SS @ .3 ohms @ 40 watts.
BTW running homemade juice, max VG on dual SS @ .3 ohms @ 40 watts.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Can you post a pic? I've never had a dry hit - max VG, Cotton Bacon, wicked to the top of the glass like you. Only I'm running at 90 watts.
Stupid question: You're priming the wick, right? I gotta ask...
Yes, I'm priming the wicks after installing them, I have wicked loose & tight in coils and still dry after 2 draws, also tried single coil at lower watts? I thought my Griffin 25 was a pain to wick but this thing has me stumped........
What size coils?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Tried 3.0 & 2.5
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
If you wanna send to me, I'll wick it for you and send it back. That way you can see what's working for me up close from the inside. Here's a few pics of mine from the outside of the juice chamber.
Ur photos doesn't help at all, that looks like a saturated RDA dripped from the top... Look at ur screws
VAPE ON
I will try spaced coils tomorrow. Here is is right now, I have the hole in the cotton too large and it's leaking from the top while inverted. I must be cooking the juice out of the coils too fast?
Spaced em outI will try spaced coils tomorrow. Here is is right now, I have the hole in the cotton too large and it's leaking from the top while inverted. I must be cooking the juice out of the coils too fast?
Ur cooking the juice inside the coil too fast, that's why ur getting dry hits....
And obviously you have wicking problem...
Do you really have to VAPE max vg?80/20pg
I drip max vg
And I tank 60/40pg.... Good luck
VAPE ON
Yes I use max VG 95/5, I have tinnitus and PG increases the ringing. I don't have any wicking issues with my other tanks with my juice. I'm waiting on my SS claptons and I will try again with them spaced and a higher ohm.
oko like i said i jut bought one and its on its way but heres my thoughts
1 you dont have enough wick at the tails in your picks. compare it to chefs picks chefs wicks fill the entile hole yours do not.
so i think thats an issue imho
2. what are those like 10 wraps at 28ga 3mm ID and its .3 ohms?
thats a lot of wire fr the cotton to feed on a big deck
i would go with more complex wires and 3.5-4 mm ids so you have enough cotton to feed the wire with out having too much cotton
try parallel coils or twisted, try another gauge maybe to raise the ohms a simple coil like that heats up and eats juice fast
1 you dont have enough wick at the tails in your picks. compare it to chefs picks chefs wicks fill the entile hole yours do not.
so i think thats an issue imho
2. what are those like 10 wraps at 28ga 3mm ID and its .3 ohms?
thats a lot of wire fr the cotton to feed on a big deck
i would go with more complex wires and 3.5-4 mm ids so you have enough cotton to feed the wire with out having too much cotton
try parallel coils or twisted, try another gauge maybe to raise the ohms a simple coil like that heats up and eats juice fast
Yea, waiting on my claptons..... I will up the coil diameter too, these are 2.5's
My juice is 80%VG and it's wicked very heavily with rayon - I didn't even have to thin the tails. No wicking problems at all, using the included claptons (which I spaced slightly).
I cut my tails just to the top of the glass, but of course you do have to tip the tank to keep the wicks saturated.
I cut my tails just to the top of the glass, but of course you do have to tip the tank to keep the wicks saturated.
Last edited:
I'm sure it has been asked in here already but I'm going to ask again lol. Besides the size is there any real difference between the limitless and the plus? I guess my main question is flavor wise, is one better then the other?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
How is everyone doing their tails ? I have tried several ways , with the tails right at the base of the screw on cap and protruding down about a 1/8 in and also one with tails about 5 mm off the bottom of juice chamber . All have strengths and weaknesses but the protruding wicks seem to give me the better outcome without the raised pinky tilt on a 45 degree vape practice
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
Well, after some more consideration, LP is good and so is the Supreme, each at it's own way, so the Supreme retains it's place at the top along side the LP.
LuTang
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
i was fluffing my cotton and thinning it, but last 3 wick jobs i just cut and have never had a dry hit with my og limitless or limitless +. i was running single coil, but now running dual clapton at 80-100w. maybe the dude having dry hits is taking 10 second pulls. lol. oh i run max vg too.
I have a couple on the way will be here tomorrow from ecig.com. I can't wait to see what all the hype is about...
http://www.ecig.com/ijoy-limitless-rdta-plus-tank.html?___SID=U
http://www.ecig.com/ijoy-limitless-rdta-plus-tank.html?___SID=U
I fluff my tails and trim them to just touching the inside of the glass. My current build is dual kanthal claptons 0.24 running it 70 watts and haven't had even a hint of wicking issues. Every draw is dense and juicy. I haven't found the need to consciously tilt it to keep the wicks saturated. The natural motion of bringing it up to vape keeps it wicked just fine, even on a near empty tank.
LuTang
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
is that a clone? that doesn't look right. my topcap does not look like that. and the barrel should not have a raised lip like that. how does the AFC work? i would cancel my order ASAP.
LuTang
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ya b-rod, i'd hate to have you receive a clone. especially since that price is around what i paid for my authentic. good luck man. hopefully they just posted pics from a bad source and have sent you the authentic product!
Yeah they always have pictures that aren't the right product. That might be a pic of the prototype. I bet they have the authentic LP and it's the one that everyone has gotten from other sites. They just suck with posting the right pic.
mine doesn't look like this either, but the one in this review does, so what's going on here' i'm not sure.i can guarantee the top cap and barrel should not look like that in the pics on ecig.com.
mine doesn't look lik
LuTang
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
lol, nice ribbing you gave KenD today in the sig213 tread. i'm MadVLN over on ecf
That does look weird, can't be the right pics.i can guarantee the top cap and barrel should not look like that in the pics on ecig.com.
Lol. That guy says something then comes back and says he didn't say that. It was fun.....lol
Sent from my SM-N910P using Tapatalk
This is definitely a clone.i can guarantee the top cap and barrel should not look like that in the pics on ecig.com.