Ijoy EXO RTA

[DX9]

We talking about the same tank here? The glass is exact same as my Griffen 25 Plus. It's actually thicker then my Serpent Mini glass that both of those glasses cracked by just taking them off to clean. It also looks the same width as my OBS Engine tank glass.

 

[SirRichardRear]

Well I having some bad luck with this tank, to begin with it arrived with one of the small glass tanks cracked, and now after taking apart the larger 6ml tank that decided to crack on me as well.
I'm sure they went out and sourced the thinnest glass they could possibly find.
And I've yet to see any available spare glass tanks for it yet, unless I'm looking in the wrong places.

Yes it deliveries on flavor, but what cheap material they have used in the making of this rta.

There rant over.

That's odd. The glass on mine is solid

Sent from my SM-G935V using Tapatalk

 

[Mazam]

Well I having some bad luck with this tank, to begin with it arrived with one of the small glass tanks cracked, and now after taking apart the larger 6ml tank that decided to crack on me as well.
I'm sure they went out and sourced the thinnest glass they could possibly find.
And I've yet to see any available spare glass tanks for it yet, unless I'm looking in the wrong places.

Yes it deliveries on flavor, but what cheap material they have used in the making of this rta.

There rant over.

Where did you buy it?

I've had listed as authentic products coming out of china show up as not actually authentic when it got here.

 

[bmclaurin]

Only complaint I have with it is the post screws are absolute crap. Maybe for standard round wire builds they would be ok, but for anything like a fused Clapton that needs more "bite" to be firmly trapped against the post, they will strip. I replaced mine with some compatible screws from another atty. Other than that, this thing really shines, particularly in dual coil mode. One of my favorites for sure.

 

[SirRichardRear]

Only complaint I have with it is the post screws are absolute crap. Maybe for standard round wire builds they would be ok, but for anything like a fused Clapton that needs more "bite" to be firmly trapped against the post, they will strip. I replaced mine with some compatible screws from another atty. Other than that, this thing really shines, particularly in dual coil mode. One of my favorites for sure.

I think all attys should use hex screws. Phillips and flats are just a strip waiting to happen

 

[manos58]

All screws of this size need "gentle" handling .Most important is the screw drivers enter the slots as firmly as possible and always the right size .If they have the slightest play they tend to "jump" out of the slots and ruin them .

 

[ben73]

That's odd. The glass on mine is solid

Sent from my SM-G935V using Tapatalk

Same here mine feels solid , too

Sent from my ONEPLUS A3003 using Tapatalk

 

[ben73]

Only complaint I have with it is the post screws are absolute crap. Maybe for standard round wire builds they would be ok, but for anything like a fused Clapton that needs more "bite" to be firmly trapped against the post, they will strip. I replaced mine with some compatible screws from another atty. Other than that, this thing really shines, particularly in dual coil mode. One of my favorites for sure.

I've replaced all mine for 3 m , 3,mm Hex grubs , Only because the Included driver dont even fit them , only a micro philips driver fits , so swapped them all out ,

3 piece section great allows you to access deck without draining

Good airflow from wide to shut down .

Loving the single coil deck ,

6 ML tank installed which they only provide one of
hmm wonder if spares will be available possibly on fasttech at some point .

Only tested with the Included pre rolled coils, made it 3.5mm ID ,
(had it all weekend but had no time to build it up.)

Wicked up with my stretched out cotton strip 1/4 of a pad stretched out to look like half a pad gently rolled back ,

This is 1 1/4 of a organic cotton pads

Fits great, wicks fantastic,
No dry hits , No leaks,

Will make some SS clapton or such later for TC on my VT,75 dna chrome/ SS mod
Im always on hunt for single coil tanks ,

(but do love the TF gt v3 mini)

Flavours pretty dam decent on first run , Clouds up very nicely too for one coil.

Swapped out drip tip for one thats a little easier / longer which is its only problem , DT too short .
30w with my Custard Donut mix an this is mouth watering Flavours ,
I can see me really liking this rta ,
Also have the Exo sub S too that also is pretty decent got that at 10£ from gearbest came with 2 coils , quad an single ,

Still awaiting the XS-1Rba
For it to come its diddy 22,mm tank fits well on Ijust 2 have my banana Cake in that one , getting a nice toffee Flavours coming through from it even though none was mixed in very nice.

Sent from my ONEPLUS A3003 using Tapatalk

 

[SirRichardRear]

I've replaced all mine for 3 m , 3,mm Hex grubs , Only because the Included driver dont even fit them , only a micro philips driver fits , so swapped them all out ,

3 piece section great allows you to access deck without draining

Good airflow from wide to shut down .

Loving the single coil deck ,

6 ML tank installed which they only provide one of
hmm wonder if spares will be available possibly on fasttech at some point .

Only tested with the Included pre rolled coils, made it 3.5mm ID ,
(had it all weekend but had no time to build it up.)

Wicked up with my stretched out cotton strip 1/4 of a pad stretched out to look like half a pad gently rolled back ,

This is 1 1/4 of a organic cotton pads

Fits great, wicks fantastic,
No dry hits , No leaks,

Will make some SS clapton or such later for TC on my VT,75 dna chrome/ SS mod
Im always on hunt for single coil tanks ,

(but do love the TF gt v3 mini)

Flavours pretty dam decent on first run , Clouds up very nicely too for one coil.

Swapped out drip tip for one thats a little easier / longer which is its only problem , DT too short .
30w with my Custard Donut mix an this is mouth watering Flavours ,
I can see me really liking this rta ,
Also have the Exo sub S too that also is pretty decent got that at 10£ from gearbest came with 2 coils , quad an single ,

Still awaiting the XS-1Rba
For it to come its diddy 22,mm tank fits well on Ijust 2 have my banana Cake in that one , getting a nice toffee Flavours coming through from it even though none was mixed in very nice.

Sent from my ONEPLUS A3003 using Tapatalk

Very nice! I need to get some spare grub hex screws for sure

Sent from my SM-G935V using Tapatalk

 

[ben73]

Very nice! I need to get some spare grub hex screws for sure

Sent from my SM-G935V using Tapatalk

The ones Included dont fit the blue driver , dont know why they bothered Including it tbh , grubs are cheap enough online ebay 50 for like 3£ , got 5 sizes now 250 grubs lol , i dont know why but habit i suppose i buy spares of everything including tanks , then spares for spares
Vaping has been one expencive habit this past year alone ,
I've spent thousands an still want need more,
Been stock Piling for TDP regulations , since with have a 2ml max tank limit , but no mod restrictions yet ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[ShowerHead]

I've replaced all mine for 3 m , 3,mm Hex grubs ,

So these are M3X3 ?

 

[ben73]

Yes , but thinking m3 4mm long may be better on the single coil deck just for Lenght of posts , will dig them out tomorrow an try since the Single Coil deck has slight longer threading on posts , ,
M3 fits well though ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[ShowerHead]

Seems to be a run of black ones with a wee bit of paint in the base causing low ohms or no atomizer.
That's from Fasttech, but I also heard from a guy who bought his at a B&M.
Perhaps I should go SS.

 

[ben73]

I always go SS now , the paint always causes problems be it on threads an causes fitting to be tight or lack of connection or wears off at some point making it look cheap an nasty ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[DX9]

I'll hopefully get my SS one today after bringing back the faulty black one. They don't open for another hr and they only had one left yesterday so I'll call once they open and hopefully it's still there

 

[DX9]

So far so good the first few hours on the SS.

 

[Mazam]

Seems to be a run of black ones with a wee bit of paint in the base causing low ohms or no atomizer.
That's from Fasttech, but I also heard from a guy who bought his at a B&M.
Perhaps I should go SS.

I really want one atm but this is the only thing holding me back.

Of course I could probably get over my black preference if I saw a good US-based sale that matched the Fasttech price

 

[Mazam]

Meh, I got tired of thinking about it and just pulled the trigger on a SS from Fasttech.

I mean $26...why not. Plus their last few packages got here in a week (ok, knock on wood there).

 

[DX9]

I guess the SS still looks ok on my Black Therion. Liked the Black Exo but missed the great vape from the Exo to pass up

 

[ShowerHead]

I shook the dice on the black.
If the bad batch was larger than I think, then I'll have to deal with it.
When the canoe from China docks, I'll be first in line.

 

[ShowerHead]

No leaks at all

I haven't had any leaks with mine after 3 tanks.

After 3 days of continuous use, even with reducing the wick tails on the dual coil deck, I have not had any leaking at all.

Well, mine are still rowing their way from China.
Meantime, back on that other forum, there are reports of seeping from the AFC ring. Someone else had a full 6ml tank dump in their pocket.

If that's so, there will be two black EXOs for sale. I no longer do wet tanks of any kind.

However, that's the only reports between the two forums, so maybe I'll get lucky. Though I'm already gambling on the black.

 

[SirRichardRear]

Well, mine are still rowing their way from China.
Meantime, back on that other forum, there are reports of seeping from the AFC ring. Someone else had a full 6ml tank dump in their pocket.

If that's so, there will be two black EXOs for sale. I no longer do wet tanks of any kind.

However, that's the only reports between the two forums, so maybe I'll get lucky. Though I'm already gambling on the black.

there could have been a bad batch or it could be user error. I do know a few people got a bad insulator on theirs

 

[manos58]

With RBA tanks many times ,if not always , has something to do with the user .All the o-rings are thin and very flexible so they need care and gentle handling .I've seen Busardo or Daniel of DJLsb to ruin an o-ring just by catching it while screwing the base or the fill cup .Or people put a lot of cotton in the coils ,forget to put an o -ring in its place etc. And usually people put the blame on something else but themselves .

 

[ShowerHead]

The issue with the tank leaking was user error. He didn't tighten the extension when he mounted the 6ml tube.
The other was reported once and not verified.

So, when the shipping gods smile upon me, I'll take it for my own test spin.

 

[Nailz]

Still loving this tank, great vape even for MTL, and easy to build on.

Only problem I've had a few times, when unscrew the top cap to fill, the chimney unscrewed instead, and I'm concerned cranking down to much will crack the glass, wish they had put knurling on the metal under the fill cap too, then could easily hold both pieces when unscrewing to fill.

 

[Mazam]

So it's been about 2 years since I even tried to run a single coil build in a sub ohm tank.

What kind of kanthal coil builds are people even running for single setups these days? I usually vape at anywhere between 35-45 watts, and wouldn't be against buying a custom made one if it really makes that much of a difference.

 

[manos58]

So it's been about 2 years since I even tried to run a single coil build in a sub ohm tank.

What kind of kanthal coil builds are people even running for single setups these days? I usually vape at anywhere between 35-45 watts, and wouldn't be against buying a custom made one if it really makes that much of a difference.

At what Ohm are your coils? 35-45 watts means nothing .It's the applied voltage that matters .

 

[Mazam]

At what Ohm are your coils? 35-45 watts means nothing .It's the applied voltage that matters .

Bah, thought I added that in an edit before leaving the page. My bad.

Usually around the 0.25-.3 area (depending on the deck. For my Amomimzer Supreme i usually just default into throwing in two quick and spaced 3mm/4 wrap claptons), but I can be flexible. Really just looking for ideas on what other people are running while being satisfied with the experience.

 

[manos58]

multiple cores to go so low in Ohms .Staggered claptons at least if using Kanthal

 

[TH3JUICEMAN]

Been loving the ss exo I picked up a few weeks ago. Went ahead and ordered the black one from fasttech to hold onto until I get my funds up for a black therion.

 

[KingPin!]

is the standard exo better than exo xl?

Also compared with other IJOY products how do these compare to say something like the limitless?I know some might say oranges and pears but might as well give it a go

 

[DetroitVapes]

Ordered the Black. Waiting to get off work so I can open it up

 

[DX9]

I never leave the house without the Exo. Stays right on my Therion everyday. I do bring my other Therion with me each day basically rotating a couple tanks. I vape the Exo 80% of the time for sure each day. Love this tank.

 

[SirRichardRear]

I never leave the house without the Exo. Stays right on my Therion everyday. I do bring my other Therion with me each day basically rotating a couple tanks. I vape the Exo 80% of the time for sure each day. Love this tank.

Exo and a therion? very nice set up man!

 

[DetroitVapes]

I never leave the house without the Exo. Stays right on my Therion everyday. I do bring my other Therion with me each day basically rotating a couple tanks. I vape the Exo 80% of the time for sure each day. Love this tank.

good to know. that's gonna be my exact set up in a few hours lol

 

[DX9]

Only way to go

I do miss my black one also. My new Black one should be next week probably

 

[Johnnytraveler]

I never leave the house without the Exo. Stays right on my Therion everyday. I do bring my other Therion with me each day basically rotating a couple tanks. I vape the Exo 80% of the time for sure each day. Love this tank.

I have tanks i like more than other tanks, I have tanks that I strongly recommend,
BUT
I don't have a tank that I vape 80% of the time.
That's an incredibly strong recommendation.

Sent from somewhere in Vietnam.

 

[DetroitVapes]

Anybody found good replacement drip tips? The stock one is probably my only con. Other than that I'm loving this tank.

Sent from my LGLS775 using Tapatalk

 

[SirRichardRear]

Anybody found good replacement drip tips? The stock one is probably my only con. Other than that I'm loving this tank.

Sent from my LGLS775 using Tapatalk

I'm not 100% sure but i think TFV8 tips fit. i can check later if you want

 

[DetroitVapes]

I'm not 100% sure but i think TFV8 tips fit. i can check later if you want

Thx I'd appreciate it.

Sent from my LGLS775 using Tapatalk

 

[SirRichardRear]

Thx I'd appreciate it.

Sent from my LGLS775 using Tapatalk

I'll let you know when i get home.
i do know the EXO XL and ijoy RDTA box takes them. the TFV8 drip tip is pretty universal. works on dozens of attys

 

[Chokeslam]

Anybody found good replacement drip tips? The stock one is probably my only con. Other than that I'm loving this tank.

Sent from my LGLS775 using Tapatalk

TFV8 tip won't fit. It uses a standard 510. I've tried a few, and so far I prefer the Aromamizer Supreme tip.

 

[SirRichardRear]

TFV8 tip won't fit. It uses a standard 510. I've tried a few, and so far I prefer the Aromamizer Supreme tip.

thank you sir.
but using a 510 means there are a lot of tip options out there. I like the 2 puffs style myself for 510 tips

 

[ben73]

Anybody found good replacement drip tips? The stock one is probably my only con. Other than that I'm loving this tank.

Sent from my LGLS775 using Tapatalk

Im using one from the Supreme 25mm never liked or used it on supreme but seems to fit an look good on the Exo go figure lol , swapped out the exo s drip tip too for a smaller 70p fogi resin drip tip also

Sent from my ONEPLUS A3003 using Tapatalk

 

[ben73]

TFV8 tip won't fit. It uses a standard 510. I've tried a few, and so far I prefer the Aromamizer Supreme tip.

Thats what im using , i just commented then seen urs , seems my spare supreme drip tips that ive not used now have a home

Sent from my ONEPLUS A3003 using Tapatalk

 

[ben73]

Still awaiting my XS-1 rba for my exo s sub 22mm which also apparently fits the exo X Subohm too turning them into rebuildable single coil builds , maybe this is where the MTL comes in ? I dunno until i get mine

Sent from my ONEPLUS A3003 using Tapatalk

 

[ben73]

For the exo S and Exo X Subohm , so makes them rba,/rta

Sent from my ONEPLUS A3003 using Tapatalk

 

[DetroitVapes]

So what y'all saying is I should buy a Aromamizer for the tip lol

Sent from my LGLS775 using Tapatalk

 

[SirRichardRear]

So what y'all saying is I should buy a Aromamizer for the tip lol

Sent from my LGLS775 using Tapatalk

LMAO
I have one of these i use on my supreme

it's my favorite 510 tip

 

[Chokeslam]

Im using one from the Supreme 25mm never liked or used it on supreme but seems to fit an look good on the Exo go figure lol , swapped out the exo s drip tip too for a smaller 70p fogi resin drip tip also

Sent from my ONEPLUS A3003 using Tapatalk

Same here. I can't stand it on the Supreme but it's great on a few others. The Exo and Serpent Mini 25 specifically. I use the tip from a Baby Beast on the Supreme. Double o-ring tips seem to work better for it, the singles(like the one it comes with ironically) don't like to seat properly.