Yep same here I only have 7 of them.If you don't like it...I'd be happy to take it off your hands.....
I'm going to have to try this when I pick-up some more SS316l.I use 3mm 26ga SS316l 10 wrap parallel coils in mine.
Good in a mech or regulated.
prolly work out to about the same. Mine run .34 - .35.I'm going to have to try this when I pick-up some more SS316l.
I've been useing 3mm 24ga nichrome80 8 wrap parallel coils on a GBOX, and its great.
id be happy to take one from that 7 lol. anyways been eyeing the nano for a while now and I've also heard good things about the le supersonic.Yep same here I only have 7 of them.
Only squonk RDA I have used for months.
Love them, when I shop anywhere online if they are available I add one to every order.
Congrats on winning one !, it's a must own.
Like my fav tank the kanger Subtank Mini V2 RBA they will be discontinued at some point.but what’s the use of having that many Wasp Nano’s
A smallish clapton if you are talking claptons 3mm ID maybe .35 - .45 ohms ?AVS has a sale going on, so I thought about picking up some pre-made coils. Anyone have any recommendations for me to use on the Wasp Pico Squeeze combo? Maybe @The Cromwell?
8 wraps if you like a warmer vape. I also slightly space them.
The 10 wrap parallel I described gives a lightly warm vape on the pico with 25R's or HG2's in it.I prefer a cooler, but flavorful vape. Was thinking of these triple cores in 30G/38G with 6 wraps. Should ohm out to 0.35 if I take a half wrap out...just not sure how ramp up would be with these complicated wires.
https://www.advancedvapesupply.com/...gx3-36g-316l-ss-fused-clapton-coils-x10-pcs-1
The 10 wrap parallel I described gives a lightly warm vape on the pico with 25R's or HG2's in it.
With VTC5A's ti will be a bit warmer as they hit harder.
and it is quite flavorful.
Never used the coils you pointed out but they should work fine.
I am a round wire kind of guy.
NPI’ll definitely order some round wire coils as well too get started. Thanks man...
Round wire coils are easy with this tool.
https://www.fasttech.com/products/0/10012320/3721500-coil-master-styled-v3-6-in-1-e-cigarette-wire
what I use.
That and a pair of snips some wire and you are in business.
You either need an ohm meter thingy or a regulated mod to check you builds with to be sure of no shorts, etc on any unregulated device.Ah yes, I’ve been thinking of picking that up with some snips and ceramic tweezers. So you don’t think a full ohm meter is necessary?
Round wire coils are easy with this tool.
https://www.fasttech.com/products/0/10012320/3721500-coil-master-styled-v3-6-in-1-e-cigarette-wire
what I use.
That and a pair of snips some wire and you are in business.
You either need an ohm meter thingy or a regulated mod to check you builds with to be sure of no shorts, etc on any unregulated device.
However the Pico Squeeze has short protection and will not fire if too low on the resistance.
But I still recommend checking your builds.
And here is a good tool for figuring out your coils you build.
Also has ohms law calculator for figuring battery drain.
http://www.steam-engine.org/
Wow - you are Mr Fancy Pants, lol
I use this cheap ass jobber Vaping Coil Winding Jig Tool for Rebuildable Atomizers and nail clippers, lol
My $3 snips from Harbor Freight are cheaper than clippers.
I also have one of those tools but have not used it since I got the coilmaster.
I even built a stand for my coilmaster and such.
View attachment 105834
Question about the decks on the various colors; Saw one site describe the deck on the black as brass while on another site it was listed as stainless steel. Is the black deck painted, anodized etc? I prefer the look of the black topcap, but am concerned about the deck and wondering if the clear cap/ss deck would be a safer/smarter choice.
Powdercoat, yeah - better guess than mine. No, the deck doesn't get hot-hot, but it's always awash in juice - from squonk to cap interior.
That's a good point. My experience in watch and jewelry industry taught me that gold plating, silver plating etc. vary widely even from the same factory because the plating baths don't stay steady from day to day. Over time, regular use causes fading, chipping etc. on many generally well made products. Plating also varies widely in thickness, as vendors make cost choices(or workers leave item in the plating for varying amounts of time) and thicker plating costs more because they use more gold or silver. SS is always going to hold up the best and scratches won't be as noticeable.SS does not chip or scratch and look bad.
My SS tanks and attys still look just as good as new some close to 3 years later.
NP
enjoy your squonking journey and let us know how it works out.
My fav for a wasp is a 3mm 26ga SS316L 10 wrap parallel. fits perfectly slightly spaced and vapes nice.So the AVS triple core Claptons that I got from AVS have horrendous ramp up and ramp down time. Takes at least 2-3 seconds from cold to start getting vapor. First time playing with Claptons. Fortunately, I also have a few simple SS316 round wire coils...gonna put one in tonight.
My fav for a wasp is a 3mm 26ga SS316L 10 wrap parallel. fits perfectly slightly spaced and vapes nice.
Just very slightly spaced and it will fit perfectly between the posts.Thanks so much for all of your help! If I recall correctly, you’re running the Wasp on a Pico Squeeze as well, correct? Do you suggest the coil be spaced or unspaced?
Ohh and I also use a drip tip on my Wasps.
I think if one uses claptons in the wasp they need to be low mass claptons.Decided to try a very basic coil first...24G SS316 with 5.5 wraps, very slightly spaced, 0.36 ohms. Voila, instant ramp up! Also made sure to line the top of the coil with the top of the posts, so just the bottom 1/3 is visible through the airflow...no spitback and amazing flavor!
Flavor was great with the claptons, but 2-3 seconds of ramp up is ridiculous.
I think if one uses claptons in the wasp they need to be low mass claptons.
And as I said whatever works best for you. No one size fits all.
What batteries do you use?Well I’ll chalk it up to being a newb with respect to custom coils...I was just going based on the resistance. So I now have 9 AVS triple core claptons that will now sit until I get a regulated squonk mod.
What batteries do you use?
A VTC5A will heat up that clapton quicker.
One can really notice the difference between it and 30Q or HG2 or 25R.
I got 4 of them and decided I had to add another wrap or go back to my 25R's so i just went back to my 25R's
I use the VTC5A paired in my DB 160's now.
Could the ramp up/down delay have more to do with your mod? No delay at all when I use that same wire in my Reload RTA on a Double Barrel and it hits fast. Haven't heard many complaining of delays due to SS wire except in huge builds on mods suffering from voltage drop. One of my my squonkers known for voltage drop hits slowly with almost any wire or build...So the AVS triple core Claptons that I got from AVS have horrendous ramp up and ramp down time. Takes at least 2-3 seconds from cold to start getting vapor. First time playing with Claptons. Fortunately, I also have a few simple SS316 round wire coils...gonna put one in tonight.
Could the ramp up/down delay have more to do with your mod? No delay at all when I use that same wire in my Reload RTA on a Double Barrel and it hits fast. Haven't heard many complaining of delays due to SS wire except in huge builds on mods suffering from voltage drop. One of my my squonkers known for voltage drop hits slowly with almost any wire or build...
which gauge/wrap combination and what are they ohming out at?So the AVS triple core Claptons that I got from AVS have horrendous ramp up and ramp down time. Takes at least 2-3 seconds from cold to start getting vapor. First time playing with Claptons. Fortunately, I also have a few simple SS316 round wire coils...gonna put one in tonight.
which gauge/wrap combination and what are they ohming out at?
I am running their Tri-Core Fused Clapton SS 30GX3/38G / 3MM / 5 wrap - x1 = 0.35ohm in my 2 x RSQ's in TC mode at 55w and 450F and it gives a good vape for me. They seem to ramp up better than my coilology tri-core fused clapton 3-26/36 ni80 single coil ~0.21 ohm I am running in my pulse/athena boxes with vtc5a and ijoy 5 leg 20700's.