I've heard about the 25A limit, I figure super low builds are for a mech anyway. The size is what got me, and that perfect screen.I like it. But it has limitations. The batteries are in series, so the wattage can be limited. The build I just posted maxes out at 87.5 watts. It won't go any higher.
Dude don't be sorry. If anything post more them aliens is beautiful keep up the good workSame framed staple aliens from earlier 5x.5k 26k frame 36n80 alien wrap .11 ohm
Sorry for all the pics, I'm thrilled with how these big things look
Sent from my XT1095 using Tapatalk
Thanks! the macro is unforgiving, to the naked eye they looked damn near perfect.Dude don't be sorry. If anything post more them aliens is beautiful keep up the good work
sent from a dumb operated smartphone
Hell the thought my builds under a macro scare me. What I'm running nowThanks! the macro is unforgiving, to the naked eye they looked damn near perfect.
Sent from my XT1095 using Tapatalk
Looks pretty clean and symmetrical to me, but you'd be surprised, you'll be seeing wire gaps you didn't even know we're there. Then comes the obsession over them lolHell the thought my builds under a macro scare me. What I'm running now24/34 fused claptons
sent from a dumb operated smartphone
I usually have to read all the threads I check twice in the morning because the first time I'm just not awake enough lolI'll take pics with a macro lens, then look at it on the computer, and be like,"Where the fuck did that (hair, cotton fiber, fleck of dry skin) come from???". And spacing issues. There's more, but I just woke up. Yes - coffee, cinnamon danish vape, and VU are my morning ritual...
Is that ribbon vertical or horizontal,I can't tell. Nice build though!So I finally got a staple build down after getting some Kidney Puncher N80 ribbon. Fraple alien! 2x26 N80 frames, 5x.4 N80 ribbon, 32G N80 alien Clapton. Had one little gap and it bothered the hell out of me lol. Came out good for my first real try at ribbon.
Sent from my iPhone using Tapatalk
The flat part is against the frames if that makes sense lolIs that ribbon vertical or horizontal,I can't tell. Nice build though!
Sent from my XT1095 using Tapatalk
I'll take pics with a macro lens, then look at it on the computer, and be like,"Where the fuck did that (hair, cotton fiber, fleck of dry skin) come from???". And spacing issues. There's more, but I just woke up. Yes - coffee, cinnamon danish vape, and VU are my morning ritual...
Tried blowing it off with some compressed air before taking the pic?I'll take pics with a macro lens, then look at it on the computer, and be like,"Where the fuck did that (hair, cotton fiber, fleck of dry skin) come from???". And spacing issues. There's more, but I just woke up. Yes - coffee, cinnamon danish vape, and VU are my morning ritual...
You might wanna give it a little more airflow underneath the coils, though.
Me too! Now I don't have to take showers anymore - just a quick little spritz of air "where needed" and I'm good to go!Love that stuff for all cleaning needs
He's one of the great ones.Okay, I'll fix it now and post a pic to see if there is anything else I can do! By the way chef, I see you all over the place on here and I always appreciate your insight, so thank you!
Sent from my iPhone using Tapatalk
How's that vape? Wondering if it ends up with that connecting strand overheating or anything?
It should thats the reason I took out that Double Barrel Build I did in the Velocity, the part that extends to each coil wasnt heating with the coils but would heat first and almost glow bright yellow when the coils were barely glowingHow's that vape? Wondering if it ends up with that connecting strand overheating or anything?
Doh, yeah that's what I was worried about, looks awesome, thought it might be a good way to get some beefier coils into a higher ohm build, but if it's acting like that, well no go. Back to the drawing board for what I build for my NC that's coming.It should thats the reason I took out that Double Barrel Build I did in the Velocity, the part that extends to each coil wasnt heating with the coils but would heat first and almost glow bright yellow when the coils were barely glowing
If that bridge is short enough it shouldnt matter but if its around 1/3 of an inch or more then Im pretty certain it will always heat up first.Doh, yeah that's what I was worried about, looks awesome, thought it might be a good way to get some beefier coils into a higher ohm build, but if it's acting like that, well no go. Back to the drawing board for what I build for my NC that's coming.
The "Altered Bridge"That's pretty sick, I forget what that's called but that braid/knotting to connect them... wow. I'll probably just do some standard single core clapton to start.
That for the entire build name? or just the braid/knot they do with that tiny wire? That name doesn't ring a bell but the thing looks very familiar.The "Altered Bridge"