Announced: a batch of P67's going on sale 8/15.
I've decided I simply must get one of the new P67 whenever Rob gets them out
I've decided I simply must get one of the new P67 whenever Rob gets them out
Announced: a batch of P67's going on sale 8/15.
Announced: a batch of P67's going on sale 8/15.
By the time you've thought about it for a minute or two, they'll all be fucking gone lolYeah, I'll have to really think hard on that - I really, really do not want to buy anything from vape sites until we see how the hammer is going to actually hit everyone.
By the time you've thought about it for a minute or two, they'll all be fucking gone lol
By the time you've thought about it for a minute or two, they'll all be fucking gone lol
What's that atty on the one on the far right? It looks like it has acceptable air flow to meSome of my favorites
View attachment 58971
And what's that 2nd one, tan w/speckles.Some of my favorites
View attachment 58971
Looks like a Cyclone with an AFC cap.What's that atty on the one on the far right? It looks like it has acceptable air flow to me
Ty Rossum.Looks like a Cyclone with an AFC cap.
Spalted maple 18500 with a brass RM2 from the 2014 run used for only 1 bottleAnd what's that 2nd one, tan w/speckles.
It's a thing of beauty.Spalted maple 18500 with a brass RM2 from the 2014 run used for only 1 bottle
It's about time I got a squonker. You bottom feeders are all about the REO P67's , hunh?
Finally caved and pickup a Reo Grande clone at Focal for $16 and change. Also ordered the Origen Little for $11 and since my order was over $20, I got an Abaddon clone for $7.90, Alien coils 10pcs @ .45ohms for $1.50. Not a bad haul for under $40. I'm going to sand down the Reo's catch cup to take larger atties and I'm going to sand the Abaddon's blue color off down to bare aluminum and maybe do an ink patina on it.
You can use an adapter with the Reo Grand style clones and avoid sanding / filing down the catch cup. One like this I believe will work. You need to look and see their center pins are open through & through. I am squonking using an adapter. Bought two Reo Grand clones, filed one down until I tried using the adapter on the other one. It's something what might save a little time, aesthetics.
Here is another adapter which will work. You might already have an iStick kit with that adapter. I had a similar one come with the Smok M22 I bought from Vaping Mall. Sorry, only offering a suggestion. You do what's right for you.
Thanks for the tip, I'll have to look through my parts box and see if I have one of those..You can use an adapter with the Reo Grand style clones and avoid sanding / filing down the catch cup. One like this I believe will work. You need to look and see their center pins are open through & through. I am squonking using an adapter. Bought two Reo Grand clones, filed one down until I tried using the adapter on the other one. It's something what might save a little time, aesthetics.
Here is another adapter which will work. You might already have an iStick kit with that adapter. I had a similar one come with the Smok M22 I bought from Vaping Mall. Sorry, only offering a suggestion. You do what's right for you.
Holy Shit
I have lots of those
They really work on a Reo?
Thanks a bunch
Do you think this would work?
pin is removeable
how about if I take out the pin?No, there has to be a small hole through the removeable center pin for it to squonk
how about if I take out the pin?
Maybe I need the pin for electricity?
Holy Shit
I have lots of those
They really work on a Reo?
Thanks a bunch
Question to anyone that has a Reo Grande clone, how low can you build safely on them before collapsing the spring? Also, have you modified the fire button to make it more comfortable?
Cool, thanks for the info, I'll probably keep it above 0.5 ohm. Wondering if one of the nice brass fire button caps I see on a lot of legit Reo's would fit on the clone?I kind of accidentally was vaping a 0.3 ohm coil set up, dual coils. This did not collapse the grounding spring on me. Rather happy though I did not blow up a battery. I'm sure doing low sub ohm can be done safely. I admit to erring as cautious though, do not like going below 0.6 ohm. Not done anything to the fire button. I did dab the fire arm and ground spring with some Ox-Gard goop. This helps improve conductivity & keeps the parts from oxidizing & wearing out so quickly. It's minimal maintenance I've decided upon every few weeks.
Cool, thanks for the info, I'll probably keep it above 0.5 ohm. Wondering if one of the nice brass fire button caps I see on a lot of legit Reo's would fit on the clone?
I read that they won'tEh, not keen to say for sure. Do not see why it wouldn't. Again though I'm not sure on that. Someone else might know better. I've just not had any desire to use a fire button cover.
I read that they won't
button is smaller
maybe with a shim
I've always have the attitude if there's a will there is a way. I'll make something work.I read that they won't
button is smaller
maybe with a shim
I think you missed it. It started at 5pm & apparently they sold out quickly.Still not up on the site
I sent Rob an email asking when...
I was on right on time - went on a quarter till (12:45 my time)
I'm home sick, took a nap after nothing came on, woke up and still saw nothing
"When I'm watchin' my TV
And that man comes on to tell me
How white my shirts can be
But he can't be a man 'cause he doesn't smoke
The same cigarrettes as me
I can't get no, oh no no no"
I have a dumb reo question.
my lp seams to spark at the positive pin when the fire mechanism touches the positive side of the battery.
I know this is dumb.... but how do I make it stop
will try that, thank you!Mine does/did it also, I swapped the pin, gently sanded the battery top and applied deoxIT gold and it stopped.... but still occasionally does it.
Sent from my Toaster using Tapatalk
I get some arching if I go below .4 ohmI have a dumb reo question.
my lp seams to spark at the positive pin when the fire mechanism touches the positive side of the battery.
I know this is dumb.... but how do I make it stop
cool! I have that!I get some arching if I go below .4 ohm
As said use de-ox-it gold or
this works good also:
Ebay:
Sanchem Inc NO-OX-ID A Special Rust Preventive 1oz Jar NIB
$5.00 shipped
I have a dumb reo question.
my lp seams to spark at the positive pin when the fire mechanism touches the positive side of the battery.
I know this is dumb.... but how do I make it stop
Hey ms Angie!!!!!!!!!!!If you hold a lit match by it, you may get a surprise
Does anyone know where to get those silicone bottles from? @The.Drifter ?
or do mean those 8.5 mil bottles dubbed "The Fancy Italian Squonk Bottles" now available at Reo Mods for $6 or 5 for $27?Does anyone know where to get those silicone bottles from? @The.Drifter ?
Dont plug it up til after its plugged inI have a dumb reo question.
my lp seams to spark at the positive pin when the fire mechanism touches the positive side of the battery.
I know this is dumb.... but how do I make it stop
Noalox problem solvedI have a dumb reo question.
my lp seams to spark at the positive pin when the fire mechanism touches the positive side of the battery.
I know this is dumb.... but how do I make it stop