Profile RDA

Discussion in 'RECALLS, and Faulty Products' started by pkane11384, Jun 3, 2019.

  1. pkane11384

    pkane11384 New Member

    Blog Posts:
    0
    Joined:
    Nov 11, 2018
    Messages:
    26
    Long story short,

    Signed up for ZampleBox and decided to go back to dripping on my Profile so I wasn’t going through coils on the tank I’m using right now. Pull the coil and cotton rinse everything. Go to pull the squonk pin out and the whole assembly pulls out, threads and all. Once that pulls out the spring and one of the posts came with it. Can’t see any way to repair it either.

    https://imgur.com/a/2j26196

    Emailed Wotofo and the company I ordered it from and no response from either. Looks like I’ll have to look into a new RDA.
     
  2. MrMeowgi

    MrMeowgi The Vapin' Drummer Staff Member Senior Moderator VU Donator Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Sep 25, 2015
    Messages:
    11,855
    I think the post press fit sort of. Most positive posts are replaceable. Should be able to just fit it back together and put the solid pin back in. Not sure when you contacted wotofo but don't forget they're in China. So completely different schedules
     
    pkane11384 and ajvapes like this.
  3. ajvapes

    ajvapes Silver Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 18, 2016
    Messages:
    582
    looks like the squonk pin is still in the 510 pin. You need to remove it from the shaft and reinstall the 510n assembly, then install the non squonk pin....
     
    pkane11384 likes this.
  4. pkane11384

    pkane11384 New Member

    Blog Posts:
    0
    Joined:
    Nov 11, 2018
    Messages:
    26
    It was Friday sometime. Not sure if they’re in their offices over the weekend so I should hear from them soon but nothing fro myvpro who I ordered from either. It’s been a few months since I ordered it so I’m not sure they’ll do anything but it’s worrh a shot.

    I can’t think of any way to pull the squonk pin from the 510 pin without damaging the threads on it. Not sure how it wouldn’t leak either. Might chalk this one up as a loss.
     
  5. ajvapes

    ajvapes Silver Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 18, 2016
    Messages:
    582
    The 510 has a stepped thread, the larger diameter holds the positive post in, the smaller is for the spring and block.
     
  6. ajvapes

    ajvapes Silver Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 18, 2016
    Messages:
    582
    Use a needle nose plier to hold the non threaded part and hex wrench to remove the sqounk pin from the bottom...
     
  7. pkane11384

    pkane11384 New Member

    Blog Posts:
    0
    Joined:
    Nov 11, 2018
    Messages:
    26
    Going to attempt a repair but I’m not going to hold my breath
     
    ajvapes likes this.
  8. MrMeowgi

    MrMeowgi The Vapin' Drummer Staff Member Senior Moderator VU Donator Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Sep 25, 2015
    Messages:
    11,855
    Have faith. They're put together somehow
     
    ajvapes likes this.
  9. gsmit1

    gsmit1 Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Mar 14, 2018
    Messages:
    2,938
    Yeah, I don't think it's broken. It just looks disassembled.
     
    Last edited: Jun 3, 2019
    ajvapes likes this.
  10. ajvapes

    ajvapes Silver Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 18, 2016
    Messages:
    582
  11. JamesJohn80

    JamesJohn80 New Member

    Blog Posts:
    0
    Joined:
    Yesterday
    Messages:
    5
    Believe you have to do this while assembled so to speak. I remember seeing some video somewhere that happened, I totally forgot to swap the pins and realized I was leaking juice all over my paranormal.... yeah Im like a kid opening an xmas gift at age 3 still....
     

Share This Page

Close This Message