Post your builds

[muth]

Simple single coil @ 0.32 ohms.

People have the hardest time staying simple! Hard to tell from the pic but I'm guessing 24g? Diameter? Your making me use my brain

 

[Rommel]

People have the hardest time staying simple! Hard to tell from the pic but I'm guessing 24g? Diameter? Your making me use my brain

I love simple, because they are predictable and solid performers 22 gauge, ID is 2.4mm.

 

[Rommel]

There is no school like the old school and i am the headmaster.

 

[rdwilliamson]

3 strand 28g fused clapton with 32g. Paralleled with 24g.

Sent from my educated phone using tapatalk

 

[ConcreteBob]

Basic 20ga Kanthal 5 wraps with cotton.

 

[Scuzzlebutt]

There is no school like the old school and i am the headmaster.

Do you happen to know how many ohms that came out to? Also, what gauge wire did you use?

 

[Rommel]

Do you happen to know how many ohms that came out to? Also, what gauge wire did you use?

0.12 ohms and i used 22 gauge. Just did a four wrap parallel and carefully separated them.

 

[Scuzzlebutt]

0.12 ohms and i used 22 gauge. Just did a four wrap parallel and carefully separated them.

#BigBoyStatus! lol

 

[Rommel]

#BigBoyStatus! lol

Haha, not really. Have this on my Stillare V2. Clouds are not impressive when fired without the top cap, but when you introduce airflow they get pretty good. Just tried this to see if my cotton survives longer before having to rewick.

 

[Scuzzlebutt]

Still pretty cool though. Some guys that really get into cloud chasing come up with some crazy ass builds!

 

[Rommel]

Yeah, im partial to both cloud and flavor chasing. This turned out to be decent in both. But if you look at my previous posts, you'll see that i do like my clouds

 

[4G63DSM]

So, why doesnt everyone just put the length of wire used to create each coil?

 

[Donald Bickers]

So, why doesnt everyone just put the length of wire used to create each coil?

for me its hard to tell the length,because I have it long enough to work with then after I make my coil there is no way to measure it

 

[4G63DSM]

for me its hard to tell the length,because I have it long enough to work with then after I make my coil there is no way to measure it

That makes tons of sense. On other quick question. So when you add a second coil the ohms are cut in half of the original coil so if you have 4 coils would the ohms be 1/4 of the original coil,

 

[Donald Bickers]

I would think so,,,not real sure as I have never used more than dual coil

 

[T702]

That's correct a quad build that nets 0.4ohm is ( 4 ) 1.6ohm coils

 

[madmonkey]

You clapton by hand?!!! I'm trolling around some artisans here!

ha...I am no artisan...my drill went "missing" at work...waiting for tax season to buy new tools. In the meantime....I wrap about two wires a month...usually while listening to mod envy in the background ironically. Yeah, I know I need a social life....

 

[Rommel]

@MacTechVpr, tension winded coils overall propably one of my best builds. Flavor, clouds, it's all there. Smooth as silk. Damn good atty as well, juice well is one of the deepest i have seen.

 

[KeepItSimpleStupid]

2 strand 24g internal & 34g outer wrapping, .19ohms running it on my freakshow and it's vaping real nice
The lemo build is 24g and was around .8ohms, these were pics i took after to show how good the cotton held up and it's been threw about 4 tanks and still looks like it could go another few weeks, but that chimney build is lovely on the lemo

 

[cupracer92]

Flat Ribbon Wire wrapped around 9 times for a dual tin man coil - 1.01Ω - running it on the Big Dripper Clone @ 20 watts. Anyone else got any unique flat ribbon builds they want to share?

 

[Rommel]

Flat Ribbon Wire wrapped around 9 times for a dual tin man coil - 1.01Ω - running it on the Big Dripper Clone @ 20 watts. Anyone else got any unique flat ribbon builds they want to share?

I've done builds with flattened 20 gauge, clouds bro. Also tried flattened 22 gauge parallels, but those had a tendency to pop.

 

[Rommel]

Clean(ish) parallels. 0.12 ohms every time, like clockwork. I post a lot here and my builds are nothing special, so let me know when it's time to slow down.

 

[mike staley]

3 stands 28ga Braided not twisted 5 wraps .1ohm

 

[mike staley]

tripple parrallel 22ga 5 wraps .09ohms

 

[Cloudz4Days]

tripple parrallel 22ga 5 wraps .09ohms

What Atty is this?

 

[ConcreteBob]

Got bored tonight. That's 18 ga wire for the negative, and 5 wrap 24ga for the four coils, at 0.14 ohms.

 

[ConcreteBob]

Heats nicely.

 

[ConcreteBob]

All juiced up. It's just a novelty build. Good flavor and a decent cloud, but I've done twice as well in a third of the time and with a quarter of the materials.

 

[ConcreteBob]

tripple parrallel 22ga 5 wraps .09ohms

That is truly some beautiful build work. Nicely done.

 

[ConcreteBob]

2 strand 24g internal & 34g outer wrapping, .19ohms running it on my freakshow and it's vaping real nice
The lemo build is 24g and was around .8ohms, these were pics i took after to show how good the cotton held up and it's been threw about 4 tanks and still looks like it could go another few weeks, but that chimney build is lovely on the lemo
View attachment 11634 View attachment 11636 View attachment 11637

Did you fabricate that wire yourself, or did you purchase it? That's a gorgeous build, by the way.

 

[cupracer92]

I've done builds with flattened 20 gauge, clouds bro. Also tried flattened 22 gauge parallels, but those had a tendency to pop.

haha yes they do pop! sometimes after that pop there's a rush of super flavorful vapor.

 

[mike staley]

What Atty is this?

That is truly some beautiful build work. Nicely done.

thanks

 

[mike staley]

What Atty is this?

its a Mephisto

What Atty is this?

 

[KeepItSimpleStupid]

Did you fabricate that wire yourself, or did you purchase it? That's a gorgeous build, by the way.

I make it all myself, with a drill and more patience then i'd like to admit to, lol

 

[mike staley]

That is truly some beautiful build work. Nicely done.

Thank you

 

[ConcreteBob]

Thank you

Welcome

 

[mike staley]

What Atty is this?

Mephisto

 

[ConcreteBob]

Mephisto

That's the deck I built that ridiculous one I posted early this morning. Although I have a Stillare top on it.

 

[mike staley]

That's the deck I built that ridiculous one I posted early this morning. Although I have a Stillare top on it.

I use the deck with a mutation X cap

 

[ConcreteBob]

I use the deck with a mutation X cap

Yeah, that Mephisto is an outstanding build deck. But I sincerely hated the cap.

 

[mfraz25]

My first fancy coil. twisted 24g. came in at .35ohm

 

[ConcreteBob]

My first fancy coil. twisted 24g. came in at .35ohm

Beautiful.
How's the flavor and cloud profile?

 

[mfraz25]

It is the best flavor I've got from a rba to date.

 

[ConcreteBob]

It is the best flavor I've got from a rba to date.

Awesome

 

[mfraz25]

I'm thinking of trying a clapton tonight.

is it pretty easy?

 

[ChooChooTrain]

 

[cupracer92]

I'm thinking of trying a clapton tonight.

is it pretty easy?

Spinning clapton coils takes a bit of practice, once you get the technique down it's easy. Here's a video that should help you get started.

 

[ChooChooTrain]

I'm thinking of trying a clapton tonight.

is it pretty easy?

It's not easy your first time and it's not a coil for clouds it's more a flavor coil

 

[ChooChooTrain]

Can't show you my clapton says the pic is to large.

 

[mfraz25]

I'm thinking of doing a twisted 28g and run it dual