If your going to budget wire use bread ties they are ss and get really low ohms im talking .01 but they eat your battery and you need to change um everyday cuz they get gross but paper clips usually have an alloy to keep um stiff
o
The coil seems to be bent out of shape, I suspect that happened when installing the coil and tightening the screws, to solve this install the coil while having it still on the rod/screwdriver/jig you were building it on, just make sure to turn off or lock the mod first.I figured id start a thead for people to post builds and get props amd constructive criticism or simple pointers to help perfect the build
Ill start with mine
This is my first hand twisted coil 30g 316l ss wire 14 wraps at .72 ohm
View attachment 71042
View attachment 71043
How do you like your Toptank mini? I love mine. Works well even when chain vaping! I'm currently puffing on a .42 build and the flavor is right up there!Toptank mini RBA
26g twisted kanthal, 5 wraps, 3mm ID, 0.54 ohm
My second build ever, staged fused clapton. Was so excited to vape it (was reading .11ohm) but after wicking and juicing it it was at .09ohms so now I'm waiting to end my surgerys and buying some parallel unregulated box mod to try out this out :>
Sorry on low quality photo
don't fire a .09 build on an unregulated mod. only way that would be safe is with a dual battery parallel mod and using LG HB6 batts and it's pushing right at the limit.
My second build ever, staged fused clapton. Was so excited to vape it (was reading .11ohm) but after wicking and juicing it it was at .09ohms so now I'm waiting to end my surgery and hospital time and buying some unregulated box mod to try out this out :>
Sorry on low quality photo
welcome aboard!My regular daily build on the Mutation X V4 - dual mix twisted 7 wrap. I also usually sit right around 70W - my comfort zone for both flavor and blowin O's lol - I just rewicked it last night for the "Panda Shake" I just got in the mail. By the way, if you enjoy cookies and cream, this is the best cookies & cream tasting flavor I've had so far. And, in my opinion, it tastes just like ice cream because it's made by Milkshake Liquids. Anyway, I'm new to posting on this board and I just wanted to say what up to all! Much love from Philly! #Vapedaily
Sent from my iPhone using Tapatalk
Ni wire IMO is just poor for vaping. if you want to try temp control get SS wire. it can also be used in power mode unlike Ni wire and is cheap and easy to findI have no experience with ni200 26ga, have bought 5m and never had any luck with TC.
Any suggestions?
haha that is some funny shit
no! why would you want a .01 coil?If your going to budget wire use bread ties they are ss and get really low ohms im talking .01 but they eat your battery and you need to change um everyday cuz they get gross but paper clips usually have an alloy to keep um stiff
o
did you check the resistance of that before using it on your mech? what do you normally build on? if you are using mechs as it looks like, you really need a meter to know the resistance and check for shorts
don't fire a .09 build on an unregulated mod. only way that would be safe is with a dual battery parallel mod and using LG HB6 batts and it's pushing right at the limit.
I'd recommend getting a hohmwrecker G2. it'll fire any build and be much safer then using an unregulated mod
the price is good since there is a 50% off code (G2FLASHX1) but yeah shipping might be a bitch.Yeah, that was something I had in my mind
That G2 does look good, but damn, that price and shipping to Croatia... my god
I cant get it to work on official site?the price is good since there is a 50% off code (G2FLASHX1) but yeah shipping might be a bitch.
Vaporcube?I cant get it to work on official site?
I find, some of my builds will leak, if the wick it to close to the top edge of the deck. Basically, it becomes over saturated and dribbles out of the wick. Making sure I had the wick totally inside and not on top, of the top of the deck worked.Hey! I just learned this trick on another section of the forum because I couldn't get my mutation to stop leaking AND was getting annoyed taking the cap off every time to drip so (with help of this forum, I'm sorry I can't remember who to credit) but this is how it came out! It truly stopped the leaking (unless you completely overflow it obviously lol) but it has helped me considerably! Cheers #vapefamily !
Sent from my iPhone using Tapatalk
where is it leaking from?Coilart Mage GTA
Limitless RDTA plus
I dont know what's up with this RDTA but it leaks like a mother. I checked the o rings and everything looked okay.
I think Friday I'm gonna go get a dripper to use at home. I'm not having good luck with the tanks.
I think you are on the right path for sureCan't say this would solve it, but looks to me, like it needs more wicking. Just my amateur opinion.
Roger that. Not sure where exactly it's leaking from. Maybe from air holes. But I put it in my pocket. Always on the go. I think I'm gonna get a setup to take with me and a dripper for home.Can't say this would solve it, but looks to me, like it needs more wicking. Just my amateur opinion.
don't fire a .09 build on an unregulated mod. only way that would be safe is with a dual battery parallel mod and using LG HB6 batts and it's pushing right at the limit.
I'd recommend getting a hohmwrecker G2. it'll fire any build and be much safer then using an unregulated mod
It won't let me see the photo.
24g single coil. 7/64 drill bit used as guide.
0.430 ohms.
Once you get the RDA going good it might be hard to use the tank again. Both my husband and I have had our baby beasts (our first subohm sets were alien kits) pretty much laying around and mostly using the drippers. lolI'm running a 220watt alien mod with a baby beast tank as my daily. It has good flavor and decent clouds at 90watts with a t8 coil. My RDA would probley lean more towards clouds preferably.