what is his user ?!
can you send me his contact info
thank you
https://www.facebook.com/jacques.herbst.90
what is his user ?!
can you send me his contact info
thank you
The tanks are made of delrin and have a glass sliding face plate.I just saw a conversation about citrus juices cracking pods, and of course I remember that being a thing everyone talked about a lot in the Vivi Nova days, but I hadn't thought about it in years. What are the boros for BBs made of, and is that a concern? I don't think I actually have any tank cracker juices at the moment but it did get me thinking about it.
Nah you're good. They're made of delrin or ultem. No worriesI just saw a conversation about citrus juices cracking pods, and of course I remember that being a thing everyone talked about a lot in the Vivi Nova days, but I hadn't thought about it in years. What are the boros for BBs made of, and is that a concern? I don't think I actually have any tank cracker juices at the moment but it did get me thinking about it.
One of my absolute favorites, only bested by the Origin Genesis V2.Finally got on with some mesh. YFTK Sat22 clone has nice build quality. Not sure I like it enough to hunt down the OG. I'll probably hunt down some 28g kanthal to get a bit of a cooler vape. All I have at atm is Ni80. 9 wraps coming out to about 1.3 ohms.
Flavor is really great, though. Smaller chamber of any atty I've ever had! That probably helps.
Sent from the Death Star
I just want a switch blade@BrewBear if you're wanting another knife, cheap, and with a high end blade steel...
https://www.lamnia.com/en/p/41498/knives/manly-wasp-cpm-s90v-folding-knife-black
Slip joint, but imo great steel for the price... I put my email in for notification when it arrives sometime this month
I just want a switch blade
Sent from my SM-G970U using Tapatalk
You might want to look at Kershaw Launch, if you're not in CaliI just want a switch blade
Sent from my SM-G970U using Tapatalk
Wow that was incredibly well done! I liked how they incorporated echos of the prequels (even though they were over-produced and bloated story-wise) to get that emotional reaction.
They'll be coming up soon, brotha, just as soon as I get a bit of time. I've been busy at work and busy ordering more bits and bobs for the WE 130. I need to get a riser block and I just got the Tormek holder (for the small pocket knives). I finally got the 1500 grit stone and put the 6 micron diamond lapping film on the other side. Now I need to order the rest of the lapping films and handles/platens and then the strops. I have to pace myself, this stuff is a whole hell of a lot more expensive than any of my vaping gear ever was.hmm figured by now I'd see pictures of @BrewBear with his Wicked Edge all set up, practicing on that Kershaw I gave ya
They'll be coming up soon, brotha, just as soon as I get a bit of time. I've been busy at work and busy ordering more bits and bobs for the WE 130. I need to get a riser block and I just got the Tormek holder (for the small pocket knives). I finally got the 1500 grit stone and put the 6 micron diamond lapping film on the other side. Now I need to order the rest of the lapping films and handles/platens and then the strops. I have to pace myself, this stuff is a whole hell of a lot more expensive than any of my vaping gear ever was.
@~Don~, what is your opinion on the Alabama Damascus?
From what I've seen, there was one ferrier (passes away a year or so ago) who actually did make it, wootz damascus but a lot had to do with the ore he started with and it was a bit of a hit and miss. Very interesting process but I don't think I'll get into it, I have enough on my plate for now. I'll probably keep playing with mokume gane once I set up my kilns again.there are some engineers along with a US forger/blade smiths close to replicating Damascus, but are probably years away still.
From what I've seen, there was one ferrier (passes away a year or so ago) who actually did make it, wootz damascus but a lot had to do with the ore he started with and it was a bit of a hit and miss. Very interesting process but I don't think I'll get into it, I have enough on my plate for now. I'll probably keep playing with mokume gane once I set up my kilns again.
I live in a house but if I start another hobby I may have to kick the dog out and move in the dog house. My wife keeps reminding me I haven't made any jewelry in the last three years or so and I keep telling her I will as soon as my barn/toolshed/shop gets built- I still have to get the plans done and all that. I will very likely make some small jewelry stuff this summer since I'll be doing the Living History presentation in Solvang this September (we have been doing it for the last five years).exactly, I think I saw a docu-series about the wootz, which lead me to saying 100% certain, for within that video they even said it wasn't 100% but was dang close...
Was done with ore shipped in and done in like Kentucky or some place...had a dude on his computer telling the other guy and his apprentice temps to run hotter etc...was a really cool video to watch.
I watch a lot of forging videos/knife making videos... and if I lived in a house I'd probably over time get into knife making...but I don't think I'd ever do forging... probably do all steel stock/grinds/heat treats etc.
Let us know if they're as good or better than the MF bridge.The North Bridge by Signature Tips should be here today. It uses the Smok Nord coils. I have some 1.4 ohm ones that my wife is using in her Nord and the flavor is really great!
Got a fresh Boro waiting for it. Now I just need to decide what flavor to put in it!
P.S. troydestroy is releasing DryPlugs made to use with these coils. I'm definitely picking up an MTL one as the draw on these are pretty loose for my taste.
Sent from the Death Star
keep us updated...The North Bridge by Signature Tips should be here today. It uses the Smok Nord coils. I have some 1.4 ohm ones that my wife is using in her Nord and the flavor is really great!
Got a fresh Boro waiting for it. Now I just need to decide what flavor to put in it!
P.S. troydestroy is releasing DryPlugs made to use with these coils. I'm definitely picking up an MTL one as the draw on these are pretty loose for my taste.
Sent from the Death Star
I haven't been able to find the Nord coils for any less than $9.99 plus shipping (including China). More sites and shops carry them than the EUCs, but they're almost twice the price.keep us updated...
saw these bridges a while back and was curious... ok I'm lying...who am I kidding, I wont ever go back to the BB...
but I truly am curious of the Nord coils and if they are just leaps and bounds better than the EUCs...the whole cost to flavor upgrade thing... EUC coils are dirt cheap...are the nord coils dirt cheap also?
I haven't been able to find the Nord coils for any less than $9.99 plus shipping (including China). More sites and shops carry them than the EUCs, but they're almost twice the price.
I will say though, I really like my wife's Nord. Might pick one up for myself.
Allegedly Friendly Flipper is supposed to be releasing an EUC bridge, but no word if it supports the Drizzle coils. One thing is for sure though, it's FF and made of titanium so you KNOW it will be expensive
Sent from the Death Star
I think this was an independently developed bridge. I can't say for sure why but I imagine they won't be offering the MF Bridge anymoreCurious if they are paying MF a fee or what not or bought the rights to resell it... or manufacturing their own and sticking it to MF... probably slap some stupid dolphin on it and make 2 separate bridges, one for EUC and one for EUC drizzles, cause you know, more money that way if they sell 2 separate bridges...
Will be fun to see, and fuck with Matthew Freedman over it... be like, #fuckclones etc. when he posts that shit LOL
Not very. Pretty loose MTL. It would probably be better with a MTL DryPlug though.Ok, so how tight a draw can you get from the Nord?
So the A-Tank with the EUC adapter works great with the 0.5 standard coils. With the MF Bridge and the same coil heads you get more juice capacity And it works with the standard Boro.So what difference with
the MF bridges and using EUC coils
Or using the coil adapter that comes with the vapresso EUC coils and The A boro tank + adapter.
Do they do the same thing or is MF bridge offering different airflow adapters on it ?
If both allow fitting of EUC coils,
Asking as im finding it difficult to acquire one but do have EUC coils up and running using the adapters
Sent from my ONEPLUS A3003 using Tapatalk
You reprofiling that knife? or did you do the marker and glide over to match the angles? Cause that looks awfully close to 12* per side there@~Don~, you've created a monster .....and my wife is getting used to sharp knivesView attachment 137922
I did the marker thing and it was at 12* closer to 13*per side and uneven but it is a El Cheapo brand so I set it at 16* per side now. I was going to do a 20* but it was a bit more grinding than I wanted to do today. I have the WE 3 on a nice slab of alder for now. As soon as I get some time I'll make a proper base and a few holders for the stones. I have an idea of what to do but I need to finish the things I started in the house first.You reprofiling that knife? or did you do the marker and glide over to match the angles? Cause that looks awfully close to 12* per side there
trying to get used to this new juice... got some one shots of Red Pill in thx to a parlay from @robfisher and Trevor... mixed up a 15ml tester of the stuff at their recommended dilution... might have to back it down some, like in the 15% range or lower lol
That mint is like up in your face... upside... my sinuses have not been this clear in A LONG TIME
Rob, any way to get the mix done without the Candied TFA mint, and just with TFA mint? Leaves that odd after taste for me with Candied Mint
@~Don~, you are an evil, evil man! After watching this () and the second part to it, not only do I want a Sebenza, I feel I need one! I'd be happy with a plain jane Inkosi but a Sebenza would be great! I gotta save, save, save and attend the Garden Grove show at the end of October
WOW!!!! Very, very nice!Sebenza's are nice... own one...
Reason I like the Inkosi more, its less prone to user error when it comes to cleaning and servicing. With the biggest mistake people make is pinching the washers... which will cause the knife to go out of spec...and the only way to fix that is sending it in and waiting up to 8 weeks for it to be returned.
Also, whatever shows CRK goes to, they bring for sale, limited run knives and sell them at table prices... these runs of knives are not available any other way. Most of the limited run knives they have made recently sold for $800-900 a pop... with the most recent being the Damasus Inkosi Tommy Gun inlays... $800... and already doubled in price for the secondary...
My Sebenza is a black micarta inlay, same as my inkosi.
Tim Reeve has a few videos of the break down and maintenance of CRKs...
My next CRK is either going to be a PJ Inkosi or an Impinda... leaning towards the Inkosi
To get the Sebenza juices flowing LOL
View attachment 137984
Classic Sebenza
View attachment 137985
Tommy Gun Inkosi with Special Tanto Grind
View attachment 137986
View attachment 137987
Sebenza
lol
WOW!!!! Very, very nice!
I'm leaning towards the PJ Inkosi for now too.....I looked at the blade forum but I'll wait a bit longer and see. All the stuff there was in a different, alien language for me.
Now you are playing really, really dirty!Also... If you're really wanting a Sebenza and decide on a small... I'll sell you mine for what I paid $325...regularly $475... its the one I sent back to have double thumb studs put on ($25) since Sebenza's only come with a single stud... Insingo blade though, not Drop Point... I find for my use the Insingo blade shape to be the most useful...
Now you are playing really, really dirty!
But hang on to it for a little while longer if you can. The price is more than fair but I'think I'll start with a Inkosi in your price range too. I really like the flipper Kershaws and if CRK made one I'd go for it!
Some of those things cost more than my car.....and I actually need my car every day!If you're wanting a top notch flipper...Shiro's
They have the small Sebenza 21 for $375 also.....Can get a small PJ Inkosi BNIB from DLT trading for $364 (Register then do their stupid share stuff for $11 off )
They have the small Sebenza 21 for $375 also.....
YOU"RE NOT HELPIIIING!!!!!Yup, PJ Smalls are the same price.
Wilson combat Small Sebenza’s are a nice change of look.
On CRKs site you can do custom graphics...price ranges from $75-200 extra.
KnifeArt’s Carbon Fiber scale smalls a tad more but nice looking.
I really like the Wilson Combat Large Inkosi...but they are smoking ****** with their premium price
Best value bnib large knife is the Unmanzaans at $450
Some weathered CRKs
Trying to find some more photos on FB
Sent from my iPhone using Tapatalk
YOU"RE NOT HELPIIIING!!!!!