Best cloud chasing RDA that no one's ever heard of?

Discussion in 'Cloud Chasers Corner' started by Redchigh, May 5, 2017.

  1. Redchigh

    Redchigh Bronze Contributor

    Blog Posts:
    0
    Joined:
    Aug 10, 2016
    Messages:
    162
    Looking at the Mad Dog or Rabies RDAs.

    Looking for room for big builds
    Solid connectivity
    Large postholes
    Adjustable bottom airflow, with lots of air when wide open.
    Options for dual to quad builds.

    Thinking about cloud comps lately, so keep that in mind.

    It's probably going on a H-stone venom mech mod and a IPV5 occasionally.
     
  2. helmet648

    helmet648 New Member

    Blog Posts:
    0
    Joined:
    May 17, 2017
    Messages:
    69
    i just recently got the GeekVape Peerless RDA after deciding that my Kennedy V1(most likely a clone, donno was given from friend) was not built for larger builds.

    the Peerless has nice postholes for large builds and a couple of small postholes for smaller builds, just in case you need to recoil on the go and don't have all your do-dads.

    i could see doing quad coil builds on this deck but only with a single wire per coil.

    right now i have a dual-coil dual-strand twisted 22g nichrome 80 build in mine clocking in around .13Ohms.

    [​IMG]

    just finally read all of your post. sorry. this isn't bottom airflow. my apologies.
     
    EMusic likes this.
  3. Redchigh

    Redchigh Bronze Contributor

    Blog Posts:
    0
    Joined:
    Aug 10, 2016
    Messages:
    162
    Side airflow is acceptable as long as it chucks the clouds.

    Thinking maybe rabies..
     
  4. helmet648

    helmet648 New Member

    Blog Posts:
    0
    Joined:
    May 17, 2017
    Messages:
    69
    jodi.blaze likes this.
  5. fartbubble

    fartbubble Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 27, 2016
    Messages:
    720
  6. helmet648

    helmet648 New Member

    Blog Posts:
    0
    Joined:
    May 17, 2017
    Messages:
    69
  7. KingPin!

    KingPin! Senior Moderator Staff Member Senior Moderator Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,677
    The biggest cloud I ever achieved was from a single coil on the pharoah dripper believe it or not using this coil I made

    IMG_1083.JPG

    I've got quite a few attys now including some of the ones mentioned above but this coil beat the beast tank the lot was a monster lol

    God only knows what two of these buggers would be like, having said that resistence would have been too low on a parralel atty this was a 0.14 so could try a series atty for what you are trying to achieve
     
    MWorthington and SirRichardRear like this.
  8. Carambrda

    Carambrda Silver Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    976
  9. Carambrda

    Carambrda Silver Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    976
    Some pics.

    1.jpg
    2.jpg
    3.jpg
    4.jpg
    5.jpg
     
  10. helmet648

    helmet648 New Member

    Blog Posts:
    0
    Joined:
    May 17, 2017
    Messages:
    69
    they're only making 25? talk about limited.
     
  11. Carambrda

    Carambrda Silver Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    976
    Well if you look at the pics I posted you'll notice they've made at least 37. :)
    I have both the 30mm and the 24mm version BTW.

    [​IMG]
     
  12. Nekrabyte

    Nekrabyte New Member

    Blog Posts:
    0
    Joined:
    May 17, 2017
    Messages:
    19
    trying to figure out this coil hurts my brain... (i'm still very new to coil building)
     
  13. helmet648

    helmet648 New Member

    Blog Posts:
    0
    Joined:
    May 17, 2017
    Messages:
    69
    core looks like 6-10 flat pieces of wire in the center, and two i’d say 22g on the outside of those, but still inside the wrap which looks like the outside of a clapton coil stretched out, i think those are called alien, and then outside of that there are two more what looks like 22g wires.... how close am i?
     
  14. helmet648

    helmet648 New Member

    Blog Posts:
    0
    Joined:
    May 17, 2017
    Messages:
    69
    {posted on in wrong thread}
     
    Last edited: May 20, 2017
  15. KingPin!

    KingPin! Senior Moderator Staff Member Senior Moderator Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,677
    Close :)


    2x26KA1 frames
    12x0.4 KA1 (was meant to be 14 but I dropped one of the ribbon before I framed and didn't see it happen lol)
    wrap 36g NI80 (decore on 28g had to use this because I dropped the ribbon normally 26g),
    inlay 28g KA1

    6 wrap ...3mm...Ohms 0.14
     
  16. MWorthington

    MWorthington Silver Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Aug 30, 2016
    Messages:
    720
    You could fire 2 of those on a G2. I suspect they would do OK, maybe a little hot. ;)
     
    KingPin! likes this.
  17. KingPin!

    KingPin! Senior Moderator Staff Member Senior Moderator Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,677
    The G2 is on my list for sure!
     
    MWorthington likes this.

Share This Page

Close This Message