Become a Patron!

Best cloud chasing RDA that no one's ever heard of?

Redchigh

Bronze Contributor
Member For 4 Years
Looking at the Mad Dog or Rabies RDAs.

Looking for room for big builds
Solid connectivity
Large postholes
Adjustable bottom airflow, with lots of air when wide open.
Options for dual to quad builds.

Thinking about cloud comps lately, so keep that in mind.

It's probably going on a H-stone venom mech mod and a IPV5 occasionally.
 

helmet648

Member For 2 Years
Member For 1 Year
i just recently got the GeekVape Peerless RDA after deciding that my Kennedy V1(most likely a clone, donno was given from friend) was not built for larger builds.

the Peerless has nice postholes for large builds and a couple of small postholes for smaller builds, just in case you need to recoil on the go and don't have all your do-dads.

i could see doing quad coil builds on this deck but only with a single wire per coil.

right now i have a dual-coil dual-strand twisted 22g nichrome 80 build in mine clocking in around .13Ohms.

LQjszOY.jpg


just finally read all of your post. sorry. this isn't bottom airflow. my apologies.
 

Redchigh

Bronze Contributor
Member For 4 Years
Side airflow is acceptable as long as it chucks the clouds.

Thinking maybe rabies..
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
The biggest cloud I ever achieved was from a single coil on the pharoah dripper believe it or not using this coil I made

IMG_1083.JPG

I've got quite a few attys now including some of the ones mentioned above but this coil beat the beast tank the lot was a monster lol

God only knows what two of these buggers would be like, having said that resistence would have been too low on a parralel atty this was a 0.14 so could try a series atty for what you are trying to achieve
 

Nekrabyte

Member For 2 Years
Member For 1 Year
The biggest cloud I ever achieved was from a single coil on the pharoah dripper believe it or not using this coil I made

View attachment 82379

I've got quite a few attys now including some of the ones mentioned above but this coil beat the beast tank the lot was a monster lol

God only knows what two of these buggers would be like, having said that resistence would have been too low on a parralel atty this was a 0.14 so could try a series atty for what you are trying to achieve
trying to figure out this coil hurts my brain... (i'm still very new to coil building)
 

helmet648

Member For 2 Years
Member For 1 Year
core looks like 6-10 flat pieces of wire in the center, and two i’d say 22g on the outside of those, but still inside the wrap which looks like the outside of a clapton coil stretched out, i think those are called alien, and then outside of that there are two more what looks like 22g wires.... how close am i?
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
core looks like 6-10 flat pieces of wire in the center, and two i’d say 22g on the outside of those, but still inside the wrap which looks like the outside of a clapton coil stretched out, i think those are called alien, and then outside of that there are two more what looks like 22g wires.... how close am i?

Close :)


2x26KA1 frames
12x0.4 KA1 (was meant to be 14 but I dropped one of the ribbon before I framed and didn't see it happen lol)
wrap 36g NI80 (decore on 28g had to use this because I dropped the ribbon normally 26g),
inlay 28g KA1

6 wrap ...3mm...Ohms 0.14
 

MWorthington

Silver Contributor
Member For 4 Years
ECF Refugee
The biggest cloud I ever achieved was from a single coil on the pharoah dripper believe it or not using this coil I made

View attachment 82379

I've got quite a few attys now including some of the ones mentioned above but this coil beat the beast tank the lot was a monster lol

God only knows what two of these buggers would be like, having said that resistence would have been too low on a parralel atty this was a 0.14 so could try a series atty for what you are trying to achieve

You could fire 2 of those on a G2. I suspect they would do OK, maybe a little hot. ;)
 

VU Sponsors

Top