Become a Patron!

Alternate Universe

TheWestPole

Gold Contributor
Member For 4 Years
Hey @moecat, I got the Zero Gravity going last night. Did a conservative .7-.8 ohm build and it's not quite up to the dripper quality vape I'm shooting for. Gonna try a bigger coil and wick. Otherwise it's working much better then the Big Dripper it replaced. The wide chimney ID is great. Top filling fiddly but functional. Only thing the BD has that I would like to have is the tank window. The tank is not autofeeding onto the deck, no nasty leaks, etc. Will get back to you when I have a bit more experience with it.

IMAG0330_picmonkeyed.jpg
 
Last edited:

2BZ4THOT

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
IIRC the Istick 50 bucks voltage down using PWM@ 48hz which is much smoother than a typical 33.3 chipset. I personally can't even tell when it is doing it... Perhaps it is setting up a frequency resonance with the coil?
 

Midniteoyl

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
IIRC the Istick 50 bucks voltage down using PWM@ 48hz which is much smoother than a typical 33.3 chipset. I personally can't even tell when it is doing it... Perhaps it is setting up a frequency resonance with the coil?
Yes..
 

TheWestPole

Gold Contributor
Member For 4 Years
Reworked a cheapo Beast Box today. Big radii in the corners, rounded and smoothed edges everywhere. Now it feels really nice in the hand. Gonna install a new "high flush" switch and Fatdaddy spring loaded core for the 510 connector. Just have to wait for the linseed oil to dry a bit before reassembly.

IMAG0332_picmonkeyed.jpg
 
Last edited:

glassgrl

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I have a mech and an atty combo that looks like a dick. But I swear I didn't plan it that way:p
Wanna see a pic?
You got a Dr. Noah???
noah10.jpg
 

MKPM

AMG
Diamond Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
Ok, I'm going to go watch the Australian GP....later
 

InMyImage

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
@moecat update: The Erl seems to leak right after I fill it, then it stops once I start vaping. I had it on my iStick 50W and the thing started vibrating. I've heard about this happening but I forget why? You know anything? Did the leaking juice cause this?
The leaking is because of the pressure of the fluid in the tank being high enough to push some of the liquid in the chamber while you are filling it. Same thing happens when you top fill any other RTA.

Basically you are flooding the chamber and the excess liquid that gets high enough in the juice wells to rise above the air flow holes before you get the cap closed is what is leaking.

It clears up after you vape a bit because you are burning off the excess fluid in the juice wells, but it will probably gurgle for a bit. you can help this clear quicker by firing it a couple of times without inhaling, or better and faster is turn it upside and fire it so that capillary action of the wick can't pull anymore fluid into the chamber.

This is the reason why the Kayfun v4 has the closeable liquid control.

Cover up the air holes while you fill and it will help.
 

InMyImage

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
You got a Dr. Noah???
noah10.jpg
Ok... now why would anyone in their right mind, male or female, want to vape that thing :confused:

Although, I guess I could see a really cheap clone being a great gag gift :p
 

VU Sponsors

Top