Mynamajeff
Member For 1 Year
I have a 0.12 ohm build in and the mod is single battery. Am I unsafe? Batteries are 20A
Honestly a lot better answer than I had. Was very much neededYou should definitely get familiar with Ohms Law and check out Mooches thoughts on the batteries you are using. Its hard to say if your setup is OK to use without more info. The more you learn about how all of the elements of vaping come together the better off you will be when you hit the cloud button.
Basically is the risk of explosion high or low. From what I've gathered is that during venting pressure builds up inside the mod from the battery leaking and the mod itself "explodes," is that true? Because I have a squonker so pressure shouldn't build up due to the squonk window.It really depends on what your definition of "unsafe" is.
Basically is the risk of explosion high or low. From what I've gathered is that during venting pressure builds up inside the mod from the battery leaking and the mod itself "explodes," is that true? Because I have a squonker so pressure shouldn't build up due to the squonk window.
Unsafe is exploding. I have a squonk mod so pressure shouldn't build up in the mod.It really depends on what your definition of "unsafe" is.
Mechanical single battery squonkerFirst, could you let me know what mod you have?
You have a single battery Squonker. it it a regulated or mechanical?
It's the battery that has the event. While a mod can cause a battery event, for mech it's most likely to be from improperly building for the battery.Unsafe is exploding. I have a squonk mod so pressure shouldn't build up in the mod. Mechanical single battery squonker
What is ohms law?
What causes a battery to vent?
Whats the difference between a mech mod and a regulated mod?
Why do you want a mech mod?
Coil father hades and LG HG2It's the battery that has the event. While a mod can cause a battery event, for mech it's most likely to be from improperly building for the battery.
Let them know the mod's name, and the battery brand/model and not what the wrap specs say because that could be false info.
Your definitely not ready to use a mech.
Seems reasonable. Will do chief.If YOU are doing it no it is not safe for YOU to use. put the mech away. Break out the regulated mod. And do some reading.
eh, this is one of those things where your answers are right, but you would still get the question wrong on a test lol.1.ohms law is the correlation between voltage, amperage, wattage and resistance
2.a spike in temperature whoch causes a chain reaction and a rise in pressure
3.mech has no chip between the fire button, battery and atty controlling wattage and fire time
4. Cause I didn't have money for a regulated mod at the time but I will soon
I'll just add a few notions on top of what @Mykreign wrote.1.ohms law is the correlation between voltage, amperage, wattage and resistance
2.a spike in temperature whoch causes a chain reaction and a rise in pressure
3.mech has no chip between the fire button, battery and atty controlling wattage and fire time
4. Cause I didn't have money for a regulated mod at the time but I will soon
Yeah itsi np, i don't think I'm ready for mechI do understand the financial aspect. Mods can be expensive. Hope I did not offend.
I wasn't, I thought there was more to it, and I wanted to ask more experienced vapersThink he was trolling the whole time. If not why ask about that coil knowing what you know. Knowing it's over the amperage the battery can handle
Sent from my LM-Q610(FGN) using Tapatalk
I wasn't, I thought there was more to it, and I wanted to ask more experienced vapers
Thanks. I already put my current mod up for sale and I'm going for a minikin v2 with zeus dual or kylin v2.You were good to reach out. A lot of people roll through regularly trying to make the vape equivalent of a pipe bomb. As a nearly full time mech user its pretty scary sometimes the questions people ask. Generally anything that contains "Is this safe?" is usually dangerous. Folks are twitchy about these kinds of questions.
I am going to say no, for the simple reason that you should already know how "safe" a 0.12 ohm build is, how many watts and how many amps are being drawn from that 20A battery. You should also know the stress test results for the battery you are using. They vary. A 20A Sony cell will have a different result than some made in China rewrap by IMFire. (for example)I have a 0.12 ohm build in and the mod is single battery. Am I unsafe? Batteries are 20A
Maybe I really missed something somewhere, but I don't see mech mods (worth owning) as being less expensive than perfectly decent regulated mods.
Maybe I really missed something somewhere, but I don't see mech mods (worth owning) as being less expensive than perfectly decent regulated mods.
I was only thinking of initial purchase price. SorryYou are definitely missing something.
Mech mods are simple to use and will outlive any cheap regulated Chinese junk and can be dialed in for a very specific vape in the hands of a person who knows what they are doing.
I was only thinking of initial purchase price. Sorry
Which Meg just mentioned clones, which I didn't think of either.
Maybe I really missed something somewhere, but I don't see mech mods (worth owning) as being less expensive than perfectly decent regulated mods.
Somebody doesn't know ohms law or how series/parallel works. lol.BOOM
Somebody doesn't know ohms law or how series/parallel works. lol.
7.4V (3.7x2) at 60A (30A cdr x2)
comes to 444 Watts at 0.12 ohm
Within the cdr of 2 30A batteries in parallel.
*That is using 4 identical 30A , 3.7V cells in a series/parallel configuration(2s + 2p)
Somebody had mentioned money being a potential issue for this fella (a thing with which I am more familiar than i wish).DOOMSDAY mod... as long as you follow the laws, will beat any regulated mod. Mod uses up to 4 batteries. 2 in series, 2 in parallel.. so potentially 7.4v and 60A. You can easily hit 400w+ and still be within limits. Using trusted brand name batteries of course.
Authentic DOOMSDAY runs $170.00 to about $220.00 Clone runs less than 30. Avoid the clone. Clone fire button is plastic that can melt.. Authentic uses Ultem (PEEK) for the fire button.