Yep same here. I did not like the wasp until I put a drip tip on it.
I now have 8 of them I think it is.
Maybe 9?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I now have 8 of them I think it is.
Maybe 9?
I've still only used it in dripper mode, and I'm using it with a single horizontal coil, but I'm liking it a lot.If I may ask how your getting on with the VLS? I've ordered one that should be delivered tommorow . Use to like the odd vertical coil in the likes of the veritas and the origen wanted to give them another go
I'll post more when I convert it over.
Sent from my LG-H931 using Tapatalk
Interestingly, I cannot fit a drip tip in my new wasp...
Sent from my LG-H931 using Tapatalk
Sent from my LG-H931 using Tapatalk
natebuchanan
Member For 4 Years
I really like my driptech ds clone from 3F, make sure to get the one WITHOUT the logo in white paint. Get the one that’s just engraved. I have 2 of them now, use them almost exclusively, and I think they each cost me $22.
Hmm 510 tips fit in all of mine. I have Frosted and yellow original tops.Interestingly, I cannot fit a drip tip in my new wasp...
Sent from my LG-H931 using Tapatalk
Have 6 replacement caps and they fit 510 tips as well.
there are nano clones out there...
Last edited:
Damn I only have 3
Last edited:
3
Sent from my LG-D850 using Tapatalk
Damn I only 3
Sent from my LG-D850 using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Where did you get that drip-tip?
Is this 1 of those Facebook (Hoops of Flaming Death) things?
You're so fancyHappy Friday mt fellow squonkers
Sent from a very cloudy room
Sent from my SM-G950U using Tapatalk
I'll try lol. Probably post mine next to a dos Equis
Sent from my SM-G950U using Tapatalk
My wifes dominican..hence the presidenteI'll try lol. Probably post mine next to a dos Equis
Sent from my SM-G950U using Tapatalk
Sent from a very cloudy room
My GF is white, hence the boxed wine in the fridge lmao
Sent from my SM-G950U using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I'll try lol. Probably post mine next to a dos Equis
Sent from my SM-G950U using Tapatalk
Mine is a Dos Equis
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I don't currently have one to fit it, but I'll give it a try. Thanx.
Sent from my SM-G950U using Tapatalk
Love the look with the custom Nuppin cap!
I'm sorry I don't remember. That's what happens when you start to get old but I'm thinking it was from maxvaping.com
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I loved the OG so did not hesitate to get the squonker
They only made 300 of them so reviews are not going to be plentiful
They did put out the anodized aluminum one not too long ago, not sure how many they made of that
It figures.
Your mod/device might be a Dos Equis.
But that Tequila looks unfamiliar.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
That's because Lucy doesn't drink cheap booze
Just ordered the Furnace RDA from 3F...had $15 in my PP account and with the upgraded shipping it cost me $18 and change. I've spent more on clones!
Will report back in about three weeks when it arrives... probably will be sold out by then!
Sent from my pants.
Will report back in about three weeks when it arrives... probably will be sold out by then!
Sent from my pants.
So I was going to post up a separate thread for the Brick'ium after using it now for over a week, but chose against that for a majority of those who may be interested in this item, frequent this thread; that and one can simply use the search function and find the word BASIUM found in this comment.
So most only care about issues with a mod and not what the mod does well at, so I wont bore you to death with what I like about it, but what I don't like about it.
The Bottle System: Was said you can utilize your own bottle, while this is true, its also false. The feeder tube connection in my belief is larger than the conventional 2.5mm (2mm tube fitting snug on 2.5) I believe its closer to 2.75 and possibly 3mm. So a taller bottle may prove difficult to install, especially if someone tries to do so with fluid in their bottle already lol...The factory bottle is nice, but 6ml...the Modmaker Geronimo 7.5ml bottle is a nice replacement for a few extra toots worth of juice
The 510 Connection: This one could be very well my own fault... but I am going to chop it up to the Basium having a fairly deep spring loaded 510...but I sometimes get the "Check Atomizer" prompt while using my NarDa with a beauty ring, and when it does make connection via beauty ring, its on average .4v loss... I need to mention that this is only an issue with the NarDa, no other RSA I own.
The Paint Finish: While I did get the Stainless version and the only "Painted" parts is the top and bottom plates, the bottom started showing table wear after the 2nd day.
And that is really the only gripes I have with this mod.
So if you're good with the factory bottles, the bottle system is flawless..and it comes with 2 complete bottles and carriers.
If you like the NarDa, just don't use a beauty ring, and its a non-issue.
Paint Finish...is there a mod that doesn't get table wear?
But I am going to monitor the 510 some more...I have a feeling that using a refill bottle might be putting excessive plunger wear on it and possibly be the reason I am experiencing the Check Atomizer warning, for I didn't get this warning til recently...which I would say is after refilling at least 30 times.
So most only care about issues with a mod and not what the mod does well at, so I wont bore you to death with what I like about it, but what I don't like about it.
The Bottle System: Was said you can utilize your own bottle, while this is true, its also false. The feeder tube connection in my belief is larger than the conventional 2.5mm (2mm tube fitting snug on 2.5) I believe its closer to 2.75 and possibly 3mm. So a taller bottle may prove difficult to install, especially if someone tries to do so with fluid in their bottle already lol...The factory bottle is nice, but 6ml...the Modmaker Geronimo 7.5ml bottle is a nice replacement for a few extra toots worth of juice
The 510 Connection: This one could be very well my own fault... but I am going to chop it up to the Basium having a fairly deep spring loaded 510...but I sometimes get the "Check Atomizer" prompt while using my NarDa with a beauty ring, and when it does make connection via beauty ring, its on average .4v loss... I need to mention that this is only an issue with the NarDa, no other RSA I own.
The Paint Finish: While I did get the Stainless version and the only "Painted" parts is the top and bottom plates, the bottom started showing table wear after the 2nd day.
And that is really the only gripes I have with this mod.
So if you're good with the factory bottles, the bottle system is flawless..and it comes with 2 complete bottles and carriers.
If you like the NarDa, just don't use a beauty ring, and its a non-issue.
Paint Finish...is there a mod that doesn't get table wear?
But I am going to monitor the 510 some more...I have a feeling that using a refill bottle might be putting excessive plunger wear on it and possibly be the reason I am experiencing the Check Atomizer warning, for I didn't get this warning til recently...which I would say is after refilling at least 30 times.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
So I was going to post up a separate thread for the Brick'ium after using it now for over a week, but chose against that for a majority of those who may be interested in this item, frequent this thread; that and one can simply use the search function and find the word BASIUM found in this comment.
So most only care about issues with a mod and not what the mod does well at, so I wont bore you to death with what I like about it, but what I don't like about it.
The Bottle System: Was said you can utilize your own bottle, while this is true, its also false. The feeder tube connection in my belief is larger than the conventional 2.5mm (2mm tube fitting snug on 2.5) I believe its closer to 2.75 and possibly 3mm. So a taller bottle may prove difficult to install, especially if someone tries to do so with fluid in their bottle already lol...The factory bottle is nice, but 6ml...the Modmaker Geronimo 7.5ml bottle is a nice replacement for a few extra toots worth of juice
The 510 Connection: This one could be very well my own fault... but I am going to chop it up to the Basium having a fairly deep spring loaded 510...but I sometimes get the "Check Atomizer" prompt while using my NarDa with a beauty ring, and when it does make connection via beauty ring, its on average .4v loss... I need to mention that this is only an issue with the NarDa, no other RSA I own.
The Paint Finish: While I did get the Stainless version and the only "Painted" parts is the top and bottom plates, the bottom started showing table wear after the 2nd day.
And that is really the only gripes I have with this mod.
So if you're good with the factory bottles, the bottle system is flawless..and it comes with 2 complete bottles and carriers.
If you like the NarDa, just don't use a beauty ring, and its a non-issue.
Paint Finish...is there a mod that doesn't get table wear?
But I am going to monitor the 510 some more...I have a feeling that using a refill bottle might be putting excessive plunger wear on it and possibly be the reason I am experiencing the Check Atomizer warning, for I didn't get this warning til recently...which I would say is after refilling at least 30 times.
Nice write up - appreciated
@BrewBear
- There's a Nuppin in the Classies on the other forum.
- Indy Vapor has Cyclones in stock for $40.
Thank you for the heads up. I saw the Nuppin when t was posted, I think it is a bit overpriced, but then that is my opinion.
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Given the fact that it hasn't sold, I suppose that assessment is probably correct.
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I definitely need a drip tip on the Wasp. No matter what build I put in it, it spits. Drip tip....all gone.
The last two I bought from CC mods (Corey) were 160 or so, one was used once or twice, the other is brand new (I don't use it yet)
Which drip tip do you like? I have one that is only 8mm tall that works well for me when I want to use a drip tip on the Wasp, but that is more to keep my lips a little farther away from the heat of the coil on a fresh battery.
Have you tried a spaced coil build for the Wasp?
I space the wraps of my coils ~2mm-3mm apart and never get spitback unless I over-squonk.
Maybe try to space your coils?
(also, simple round-wire builds, or parallel seem to work best without getting too hot on a mech)
Has anyone seen the "Swedish Vaper Dinky RDA 17mm" yet?
Looks neat, and maybe what I've been looking for, and simple build deck...
https://www.alivape.com/collections...wedish-vaper-dinky-rda?variant=12379996979279
Found only two YT vids on it, one was in Japanese, and the other was by 'Timmerz' whom I dont care for...
Looks neat, and maybe what I've been looking for, and simple build deck...
https://www.alivape.com/collections...wedish-vaper-dinky-rda?variant=12379996979279
Found only two YT vids on it, one was in Japanese, and the other was by 'Timmerz' whom I dont care for...
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I haven’t tried spacing my coils yet....still a total noob on the building frontier. I just build simple, 22 gauge kanthal, around .3. And I could be over squonking, too. Cause I’m relatively new at that, as well. Great advice! Thank you!
And I just use whatever drip tips I can find. Nothing fancy yet, but I have a cart at FT going.....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Has anyone seen the "Swedish Vaper Dinky RDA 17mm" yet?
Looks neat, and maybe what I've been looking for, and simple build deck...
https://www.alivape.com/collections...wedish-vaper-dinky-rda?variant=12379996979279
Found only two YT vids on it, one was in Japanese, and the other was by 'Timmerz' whom I dont care for...
Looks like a cross between the Odis 16 and the Origen Little maybe with some OG Goon airflow tossed in, at least on one side (can't see the other side) unless there is not a ring inside the cap and it relies on the deck to block or open the airflow
It does - from looks, I'd compare to Origen Little 16, except that it's "one-sided".
Not enuf air for me. If it was 2-sided I might be interested - I'd run air wide open, and try both single and dual coils to see. That's what I do with my teensy atties... Nuppins are like 18mm, and I run duals in 'em...
Not enuf air for me. If it was 2-sided I might be interested - I'd run air wide open, and try both single and dual coils to see. That's what I do with my teensy atties... Nuppins are like 18mm, and I run duals in 'em...
Has anyone seen the "Swedish Vaper Dinky RDA 17mm" yet?
Looks neat, and maybe what I've been looking for, and simple build deck...
https://www.alivape.com/collections...wedish-vaper-dinky-rda?variant=12379996979279
Found only two YT vids on it, one was in Japanese, and the other was by 'Timmerz' whom I dont care for...
Yep love my Wasps with DT would not vape themn without.
LOL. The name is funny to me too.
Growing up in my house, when we were little kids, a boy had a 'dinky' and a girl had a 'hoo-hoo'.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
LOL. The name is funny to me too.
Growing up in my house, when we were little kids, a boy had a 'dinky' and a girl had a 'hoo-hoo'.
We called "down there" pee-wee and woo-woo