Thanks for the replyComfort Bridge, 1.6 ohm Nauti coils. Great flavor, minimal clouds.
Sent from my pants.
What are you running those 1.6 Ohm coils at, something like 12w?
Thanks for the replyComfort Bridge, 1.6 ohm Nauti coils. Great flavor, minimal clouds.
Sent from my pants.
11 watts. I'm using a LG HG2, aka doodoo brown, and getting 2 days and 2 Borotanks out of it. I'm tempted to try the 0.7 ohm ones.Thanks for the reply
What are you running those 1.6 Ohm coils at, something like 12w?
I understand that. I'm enjoying them tooMine is the black SXK USB, but I'm just joking. I'm really enjoying it! And I have to try out the MF bridge, whener that gets here.
Oh that's fantastic! Luckily I'm not the kind of nerd that flips out over stuff like that... I at least know enough to keep it to myself!
Oh I know yours is. Was messing with RSZ1The authentic brother. It's pruple/grey
Sent from my pants.
I realized that after the fact lolOh I know yours is. Was messing with someone else
Sent from my Nexus 6P using Tapatalk
I like the 0.7ohm for dessert flavors and the ceramic EUC for fruits/menthol. 0.7ohm has a really nice RDL.11 watts. I'm using a LG HG2, aka doodoo brown, and getting 2 days and 2 Borotanks out of it. I'm tempted to try the 0.7 ohm ones.
Sent from my pants.
11 watts. I'm using a LG HG2, aka doodoo brown, and getting 2 days and 2 Borotanks out of it. I'm tempted to try the 0.7 ohm ones.
Sent from my pants.
I'm not crazy about the flavor I'm getting from this 1.6, to be honest. It's okay but I'm getting better flavor from my Limitless Pulse pod vape. Really want those MF bridges to come.I run the .7nats (.84) and it sips juice and battery life I can get almost 4 tanks with my 30Qs...but flavor is meh to me, I'd try the higher Ω ones, but the .7's are mediocre in the flavor department, which makes me think the others ones wont be much different.
I'm sure the possibility of my juice just not being keen for it (7% flavoring) but even some of my higher % flavoring juice tastes like shit with them, well not shit, just not like its supposed to, well not even close to...nah its shit lol
I'm not crazy about the flavor I'm getting from this 1.6, to be honest. It's okay but I'm getting better flavor from my Limitless Pulse pod vape. Really want those MF bridges to come.
Sent from my pants.
Shouldn't that be the SHOpping block?then its going to the chopping block I am afraid.
Shouldn't that be the SHOpping block?
Btw Brew, do you use any of Troy's plugs with the MF Bridge?Shouldn't that be the SHOpping block?
Nope! They don't fit with the MTL kit. I never got past the MTL.....maybe I should try the 0.5 ohm coils....oh. wait, I just ordered a pack so it will be a while....Btw Brew, do you use any of Troy's plugs with the MF Bridge?
Sent from my pants.
Oh really? That's a bit of a downer. I like how it keeps the condensation at bayNope! They don't fit with the MTL kit. I never got past the MTL.....maybe I should try the 0.5 ohm coils....oh. wait, I just ordered a pack so it will be a while....
It should work fine with the regular bridge (the TP I mean), other than that, I give it a quick wipe when I fill the tank. I usually pull the tank out once a week and give the inside of the BB a thorough wipe down. It really is @troydestroy 's fault for not accommodating us and making the plugs we so much need!Oh really? That's a bit of a downer. I like how it keeps the condensation at bay
Sent from my pants.
Awww manIt should work fine with the regular bridge (the TP I mean), other than that, I give it a quick wipe when I fill the tank. I usually pull the tank out once a week and give the inside of the BB a thorough wipe down. It really is @troydestroy 's fault for not accommodating us and making the plugs we so much need!
Just yankin' your chain there, I know you are busy, just get to it sooner rather than later, I can wait.Awww man
I'm busy right now working in getting my CNC machine up and going. I haven't forgot about you and your mf/mtl plugs though @BrewBear
Go ahead and make a couple more bc I'm on for two!Awww man
I'm busy right now working in getting my CNC machine up and going. I haven't forgot about you and your mf/mtl plugs though @BrewBear
You should still be able to run it in power mode. If not setting up profile strictly for power should do itQuestions about the sxkusbbb. Got an Atlantis coil in and can't get it to read anything but SS or n200 or titanium. Got it from gadget and asked if he took kanthal out. Do I need to add it back on I'm guess with escribe. If so are there any certain parameters? Like a tcr value is anything
Sent from my Nexus 6P using Tapatalk
Questions about the sxkusbbb. Got an Atlantis coil in and can't get it to read anything but SS or n200 or titanium. Got it from gadget and asked if he took kanthal out. Do I need to add it back on I'm guess with escribe. If so are there any certain parameters? Like a tcr value is anything
Sent from my Nexus 6P using Tapatalk
Got it straightened out. Thanks though. I'll definitely remind thatA Factory Reset might be a good idea. Can be done through Escribe.
Tools>Diagnostics>Reboot Device>Hard Reboot
Yeah we got the coil figured out he just doesnt carry them. I think if he was to keep it for himself he was going to go with the kanger replacement parts... not sure what's best?That's a BB rev.3, I'm not sure the glass from rev.4 will fit. Your best bet on that is asking the manufacturer. The coil looks like the Aspire BVC. That's an easy fix, just replace it.
The Kanger coils seem to have a bit more air, others here can confirm that.Yeah we got the coil figured out he just doesnt carry them. I think if he was to keep it for himself he was going to go with the kanger replacement parts... not sure what's best?
Sent from my SM-G965U using Tapatalk
I've got one of the Kanger rba's in one of my rev 4s. I love it. Getting a steam tuner clone rba in a few weeks when it arrives to try it out. But the Kanger works well man. Not sure about the ssocc coils.Yeah we got the coil figured out he just doesnt carry them. I think if he was to keep it for himself he was going to go with the kanger replacement parts... not sure what's best?
Sent from my SM-G965U using Tapatalk
I have the Busto- 10mmOD 4mmID 10mm tallDoes anyone know the dimensions, height vs. diameter of the various BB drip-tip keys from JMK or Nolli Designs?
http://jmktips.bigcartel.com/product/bbtipsrev4
https://www.nollidesigns.com/collections/billet-box/products/billet-box-key?variant=43836903822
Also, the Nolli Designs do not say the materials they are made of, and without some conductive metal in the threading, the BB will not fire since this is the ground connection between the atomizer and the case.
If nobody knows, or has one to look at (and measure, in mm please) I'll have to ask these folks directly.
Thanks!
Hey guys. Looking for a little help. Guy at my local shop took a billet box in on trade. Looking for glass and coil sources as the coil is old and glass was cracked. Since it is shop owned he says it's also available to buy for $160 or so? Has a small mark on the button side as seen in the pics.
Any advice is much appreciated!
Sent from my SM-G965U using Tapatalk
Someone older into BB will have to help on that one Dave. Not much rev 3 action these days I don't think. Not sure where you could find the glass
Sent from my Nexus 6P using Tapatalk
That's a BB rev.3, I'm not sure the glass from rev.4 will fit. Your best bet on that is asking the manufacturer. The coil looks like the Aspire BVC. That's an easy fix, just replace it.
I have the Busto- 10mmOD 4mmID 10mm tall
and the Pico- 8mmOD 4mmID tall
The Nolli tips are some sort of plastic, but I'm not sure? They don't screw in, but press fit (no o-rings) into the top "nut". Therefore they don't need to conduct. 13mmOD 5mmID 10mm tall.
NOTE: measurements where all done with a rule, by eye, so not super accurate, but should give you an idea.....
Kanger SSOCC coils in the 0.5 are quite airy, restricted lung hit for sure.
As far as I'm aware of, the 1.3/1.4ohm coils are MTL and you have to use the MTL kit with the MF bridge for the BB or use the Drizzle tank from Vaporesso. If nobody wants the coils, I'll give them a home, but I'll let the other people here take a crack at it first.Got the euc coils today with sleeve. These things are tiny. Got the .5s for the sleeve and 1.3 for mtl for the a-tank if I decide to go that route. Got some more boros and rba coming in a few weeks from Gadget. So the .5 euc coils for the sleeve that came with it but the 1.3ohm coils are too small. Did @BrewBear said those are for the MF bridge. Don't plan on getting one so if someone wants these 1.3s pm me
Sent from my Nexus 6P using Tapatalk
In love with those panelsFinally got my grey/purple SXK DNA60 in, as well as the SXK Vapeshell and green/purple resin panels. Got it all set up in escribe and running beautifully.
View attachment 116390 View attachment 116391
In love with those panels
Sent from my Nexus 6P using Tapatalk
Damn 3f has them. I got the black and orange swirl. Just got the green and black for my silver 60wI'm pretty happy with them. I was kind of hoping for some with a bit more purple, but actually the ones I got look great, no complaints.
Got them here: http://www.3fvape.com/misc/24516-sx...-box-mod-purple-green-resin.html#.W1bXQtIzqUk
Also, using the 18350 batteries, each with their typical 900mAh capacity is likely to not give very long run time compared to the 3000 mAh 18650s we often use now in the Rev-4.b version of the BB.
True that!Actually i think they take 16340 batteries... Even harder to come across and lower capacity than 18350s
Thanks for the correction.Actually i think they take 16340 batteries... Even harder to come across and lower capacity than 18350s
Love the color, but outside my budget ability or justification to 'The Boss'. GLWS!My authentic 2018 RPG is in the Hardware section...
Sent from my pants.