KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Hi Folks,
I received the C-II Starter Kit directly from Vaptio. This is available to buy now. I will convey my thoughts and do my very best to provide you with enough information so you can reach your own conclusion on the product, so no recommendations from me, just a final conclusion of my personal experience with it. Please ask questions in the below if I've missed anything you want to know.
Product Overview
C-II tank
· Capacity: 4ml
· Diameter: 25mm
· Height: 53mm
· Weight: 177g (when full with pen attached)
· Coils: KW41180A 0.25ohm Kanthal (non threaded) and PW41129A 0.25ohm Kanthal (Threaded)
· Leaking proof and top fill tank
· Airflow Slots: 2
· Juice Control
C-II Vape Pen
· Battery Capacity 3000mAh
· Diameter: 25m
· Height: 88mm
· Weight 177g (when full):
· Output wattage: 30 – 100W (max)
· Output Voltage: 2.8 - 4.2V
· Max Output Current: 30A
· Pass through (vape whilst charging)
· 10 second cut off
· Low Resistance Protection
· Short Circuit Protection
· Low Voltage Protection
· Charge type: USB (use only 5V 1A external wall plug; approx. 4 hours.)
C-II Kit Product info (Price $49.90): https://vaptio.com/catalogue/c-ii_9/
C-II Vape pen only product Info (Price: $31.20): https://vaptio.com/catalogue/category/mod/pen-style-mods_15/
Cheapest replacement coils I’ve found:
https://www.heavengifts.com/product/Vaptio-PT1-Replacement-Coil.html
Available Colours;
Black, Grey
What’s included?
· Assembled C-II
· USB Charge Cable
· 2 x 0.25 Kanthal coils
· User Manual
The box is decent quality, with some basic graphics on the front. Scratch and sniff is on the bottom. Upon opening you are presented with the C-II, with the bits and pieces underneath. Inside is very much a no frills affair, I would like to have seen a spare glass section included with the spares.
Looks and Initial impressions
The C-II is the latest offering from Vaptio in the vape pen category. Instead of the “all in one” option offered by many of the pens out there the C-II is more aligned to a typical mechanical tube mod with a two piece design. Meaning if you don’t get on with the C-II tank or just want to try something a little different you can.
The finish is absolutely fantastic on both colour options. They have a silky smooth feel and what I can only describe as a rubberised type coating on the tank and the pen section. Threading is very good on the C-II tank and 510 threads. Additionally the C-II tanks positive pin sits slightly proudly at the base.
The 510 pin on the pen section is gold plated and has a good throw on it. I like the 510 connector plate on the pen as well it’s got a fat daddy style to it.
The tank itself has the same coating as the battery section. I love the way the juice flow control (JFC) closes as I unscrew the top cap, and opens when I close it back up. It work works much like the Oumier White Bone Mini in this regard, Assuming you don’t wrench it shut, which it really doesn’t need, I can open and close the JFC when in use which is really handy for travelling. The tanks capacity is good at 4ml plenty for a vape pen and last a good long while between refills.
The kit comes with two types of coils, threaded and non-threaded, both of which can be used in the C-II tank. Despite the base having threads, the O-ring on the non-thread coil was sufficient to create a good seal with no leaking (just ensure you screw everything else together properly.)
I received the C-II Starter Kit directly from Vaptio. This is available to buy now. I will convey my thoughts and do my very best to provide you with enough information so you can reach your own conclusion on the product, so no recommendations from me, just a final conclusion of my personal experience with it. Please ask questions in the below if I've missed anything you want to know.
Product Overview
C-II tank
· Capacity: 4ml
· Diameter: 25mm
· Height: 53mm
· Weight: 177g (when full with pen attached)
· Coils: KW41180A 0.25ohm Kanthal (non threaded) and PW41129A 0.25ohm Kanthal (Threaded)
· Leaking proof and top fill tank
· Airflow Slots: 2
· Juice Control
C-II Vape Pen
· Battery Capacity 3000mAh
· Diameter: 25m
· Height: 88mm
· Weight 177g (when full):
· Output wattage: 30 – 100W (max)
· Output Voltage: 2.8 - 4.2V
· Max Output Current: 30A
· Pass through (vape whilst charging)
· 10 second cut off
· Low Resistance Protection
· Short Circuit Protection
· Low Voltage Protection
· Charge type: USB (use only 5V 1A external wall plug; approx. 4 hours.)
C-II Kit Product info (Price $49.90): https://vaptio.com/catalogue/c-ii_9/
C-II Vape pen only product Info (Price: $31.20): https://vaptio.com/catalogue/category/mod/pen-style-mods_15/
Cheapest replacement coils I’ve found:
https://www.heavengifts.com/product/Vaptio-PT1-Replacement-Coil.html
Available Colours;
Black, Grey
What’s included?
· Assembled C-II
· USB Charge Cable
· 2 x 0.25 Kanthal coils
· User Manual
The box is decent quality, with some basic graphics on the front. Scratch and sniff is on the bottom. Upon opening you are presented with the C-II, with the bits and pieces underneath. Inside is very much a no frills affair, I would like to have seen a spare glass section included with the spares.
Looks and Initial impressions
The C-II is the latest offering from Vaptio in the vape pen category. Instead of the “all in one” option offered by many of the pens out there the C-II is more aligned to a typical mechanical tube mod with a two piece design. Meaning if you don’t get on with the C-II tank or just want to try something a little different you can.
The finish is absolutely fantastic on both colour options. They have a silky smooth feel and what I can only describe as a rubberised type coating on the tank and the pen section. Threading is very good on the C-II tank and 510 threads. Additionally the C-II tanks positive pin sits slightly proudly at the base.
The 510 pin on the pen section is gold plated and has a good throw on it. I like the 510 connector plate on the pen as well it’s got a fat daddy style to it.
The tank itself has the same coating as the battery section. I love the way the juice flow control (JFC) closes as I unscrew the top cap, and opens when I close it back up. It work works much like the Oumier White Bone Mini in this regard, Assuming you don’t wrench it shut, which it really doesn’t need, I can open and close the JFC when in use which is really handy for travelling. The tanks capacity is good at 4ml plenty for a vape pen and last a good long while between refills.
The kit comes with two types of coils, threaded and non-threaded, both of which can be used in the C-II tank. Despite the base having threads, the O-ring on the non-thread coil was sufficient to create a good seal with no leaking (just ensure you screw everything else together properly.)