Hi Vaping Underground members, In this review i take a look at the Active Bluetooth Music TC Box MOD 2100mAh from Wismec. The Wismec Active Bluetooth Music TC Box MOD 2100mAh was supplied for the purpose of this review by Ella from Sourcemore.
https://www.sourcemore.com/wismec-active...range.html
Introduction
The Active is when it comes to vaping a simple 80W device with TC suite, but with added features to stand out from it's competition. The first is it's rugged, lightweight yet durable design which is Water resistance, Shockproof and Shatter resistance, very suited for taking the knocks of everyday use as a device used in situations you would normally be worried about getting your device damaged. The main feature of the device is it also double's up as a speaker linking to your music devices via Bluetooth and having full functionality on the device to control the music. But was the Active music to my ears or was it mainly a unpractical device best used just for vaping alone? I give my opinion.
In the Box
Contents:
1 x Active Mod
1 x Carabiner clip
1 x QC USB Cable
1 x User Manual
Aesthetics and Ergonomics
The Wismec Active comes in cardboard packaging and as soon as i opened i could clearly see a speaker looking at me through the Perforated side panel (due to it's water resistance grading i would almost be certain there is a water resistance (but lets sound through perfectly) film on the underside of the panel). Although the speaker is only one side we have an identical perforated panel on the other side, the one i received has Orange panels, it's also available with Silver panels and Black Panels. Whichever colour you receive it will have a Black thick silicone sleeve fitted over it with cutouts for the loop (for the Carabiner clip), raised 510 plate, screen and a silicone bung to protest the micro USB port and reset recess. The sleeve seems very good quality and rugged, it will protect the device from most knocks it's likely to receive while using even in active situations. If you take the sleeve off the device looks very ugly as you can see how water resistance panels have been put on the device with raised areas for buttons to be pressed, it is quite obvious the sleeve is meant to be left on the device at all times. In regard build quality the device has been made to withstand knocks when used in active situations and in this regard Wismec have done a good job.
Active Specs and Features:
Size: 55.6mm*26.6mm*94.5mm
Output wattage: 1-80W
Output mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode
Resistance range: 0.05-1.5ohm for TC modes, 0.05-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.5-9V
Built-in 2100mAh battery
0.91inch OLED screen shows essential information
Water Resistant
Shockproof, Shatter-resistant
Compact yet Portable, A Must-have for Vapers on the Go
Multiple Circuit Protection Systems Applied
Thread type: 510 spring loaded connector
Colours: Silver, Orange, Black
You Can Buy Other Sleeves Separately
Using the Active
In this section i will simply go through the operations as a vaping device. The Active is the usual 5 clicks on and 5 clicks to turn off and once on you are met with the usual Wismec display we tend to get on there more simple vaping devices with only essential information displayed. Top left we have resistance, underneath this is the voltage and finally bottom left we have amps which can be changed to either puffs or time vaped. The entire centre and right of the display is taken up by your wattage and unit, this is temperature rather than wattage when in temp control. There are some combination key press functions which are + and - together to lock and unlock the buttons, up and fire allows you to change amps on the display to either puffs or time vaped, finally when in temp control pressing the fire button 4 times allows you to set wattage for temp control. The main menu is very simple and to access is 3 clicks of the fire button, this brings up the following options, Wattage, Bypass, Temperature Ni, Temperature Ti, Temperature SS, Temperature M1, Temperature M2 and Temperature M3.
How To Operate Speaker
On the spine of the device we have 4 buttons, holding down the bottom button causes the device to play a little jingle and announce Bluetooth is active. Turn on Bluetooth on your device you wish to pair with the Active and search devices, it should find "Wismec Active". Then simply choose "Wismec Active" and your ipod, iphone or whatever device you are using will be paired with the Active, then choose your music on the paired device and play (the music will come through the Active speaker). Now you can control the music with the Active, pressing the top button pauses and restarts the music, the two middle buttons both have 2 functions holding the buttons down turns up and turns down the volume or double pressing the buttons takes you to the next song or previous song.
The Speaker and Playing Music
I like this feature but for one reason only, yet again we have a talking point that could get the attention of smokers so a discussion about vaping in general could occur. The Speaker and how the device interacts through Bluetooth is really good and the volume and sound quality not bad but it's a gimmick as using the device this way other than for novelty purposes is just not practical as you would need another vaping device with you for when the battery dies as the battery drains in no time at all when using the device for music. Under normal circumstances i have my ipod and i have my vaping device and don't see the point of linking the two and forcing my music onto others, i'm a decent human being who would listen to my music on my ipod via earphones. To be honest if someone was using the Active in the high street forcing me to listen to their music they have no consideration and i will be able to do an update to the review on how durable the device really is and the person would deserve it for being an inconsiderate dick.
Review Continued Below:
https://www.sourcemore.com/wismec-active...range.html
Introduction
The Active is when it comes to vaping a simple 80W device with TC suite, but with added features to stand out from it's competition. The first is it's rugged, lightweight yet durable design which is Water resistance, Shockproof and Shatter resistance, very suited for taking the knocks of everyday use as a device used in situations you would normally be worried about getting your device damaged. The main feature of the device is it also double's up as a speaker linking to your music devices via Bluetooth and having full functionality on the device to control the music. But was the Active music to my ears or was it mainly a unpractical device best used just for vaping alone? I give my opinion.
In the Box
Contents:
1 x Active Mod
1 x Carabiner clip
1 x QC USB Cable
1 x User Manual
Aesthetics and Ergonomics
The Wismec Active comes in cardboard packaging and as soon as i opened i could clearly see a speaker looking at me through the Perforated side panel (due to it's water resistance grading i would almost be certain there is a water resistance (but lets sound through perfectly) film on the underside of the panel). Although the speaker is only one side we have an identical perforated panel on the other side, the one i received has Orange panels, it's also available with Silver panels and Black Panels. Whichever colour you receive it will have a Black thick silicone sleeve fitted over it with cutouts for the loop (for the Carabiner clip), raised 510 plate, screen and a silicone bung to protest the micro USB port and reset recess. The sleeve seems very good quality and rugged, it will protect the device from most knocks it's likely to receive while using even in active situations. If you take the sleeve off the device looks very ugly as you can see how water resistance panels have been put on the device with raised areas for buttons to be pressed, it is quite obvious the sleeve is meant to be left on the device at all times. In regard build quality the device has been made to withstand knocks when used in active situations and in this regard Wismec have done a good job.
Active Specs and Features:
Size: 55.6mm*26.6mm*94.5mm
Output wattage: 1-80W
Output mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode
Resistance range: 0.05-1.5ohm for TC modes, 0.05-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.5-9V
Built-in 2100mAh battery
0.91inch OLED screen shows essential information
Water Resistant
Shockproof, Shatter-resistant
Compact yet Portable, A Must-have for Vapers on the Go
Multiple Circuit Protection Systems Applied
Thread type: 510 spring loaded connector
Colours: Silver, Orange, Black
You Can Buy Other Sleeves Separately
Using the Active
In this section i will simply go through the operations as a vaping device. The Active is the usual 5 clicks on and 5 clicks to turn off and once on you are met with the usual Wismec display we tend to get on there more simple vaping devices with only essential information displayed. Top left we have resistance, underneath this is the voltage and finally bottom left we have amps which can be changed to either puffs or time vaped. The entire centre and right of the display is taken up by your wattage and unit, this is temperature rather than wattage when in temp control. There are some combination key press functions which are + and - together to lock and unlock the buttons, up and fire allows you to change amps on the display to either puffs or time vaped, finally when in temp control pressing the fire button 4 times allows you to set wattage for temp control. The main menu is very simple and to access is 3 clicks of the fire button, this brings up the following options, Wattage, Bypass, Temperature Ni, Temperature Ti, Temperature SS, Temperature M1, Temperature M2 and Temperature M3.
How To Operate Speaker
On the spine of the device we have 4 buttons, holding down the bottom button causes the device to play a little jingle and announce Bluetooth is active. Turn on Bluetooth on your device you wish to pair with the Active and search devices, it should find "Wismec Active". Then simply choose "Wismec Active" and your ipod, iphone or whatever device you are using will be paired with the Active, then choose your music on the paired device and play (the music will come through the Active speaker). Now you can control the music with the Active, pressing the top button pauses and restarts the music, the two middle buttons both have 2 functions holding the buttons down turns up and turns down the volume or double pressing the buttons takes you to the next song or previous song.
The Speaker and Playing Music
I like this feature but for one reason only, yet again we have a talking point that could get the attention of smokers so a discussion about vaping in general could occur. The Speaker and how the device interacts through Bluetooth is really good and the volume and sound quality not bad but it's a gimmick as using the device this way other than for novelty purposes is just not practical as you would need another vaping device with you for when the battery dies as the battery drains in no time at all when using the device for music. Under normal circumstances i have my ipod and i have my vaping device and don't see the point of linking the two and forcing my music onto others, i'm a decent human being who would listen to my music on my ipod via earphones. To be honest if someone was using the Active in the high street forcing me to listen to their music they have no consideration and i will be able to do an update to the review on how durable the device really is and the person would deserve it for being an inconsiderate dick.
Review Continued Below: