f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I have had this for just over a month, I intended to write this sooner; however, life happened and I’m getting to it now. The upside to that is that it has been thoroughly put through its paces. I can safely say, this is the MOST Practical squonk mod i have ever owned and it has a bonus feature. Its a little tall for some pocket use, but lite enough to carry, holds a 21700, 20700 or 18650, 10ml of juice and goes up to 90w. With a single coil atty, at around 5ow it will last me all day on one battery without refilling. - perfectly practical for a work mod, or carry around when out with Mrs. B1rd.
What is that bonus feature? You can take the squonk bottle off, put on a battery cover and it turns into a 90w single cell mod for a tank or traditional rda.
Whats included:
1) Polycarbonate Body for more Lighter Feel
2) 10ml Top Fill Bottle Capacity
3) 5w - 90w Power & Temperature Control Upgraded
4) 0.96 OLED Screen
5) Max Voltage Output 0.8v to 8.5v
6) 0.08 to 3.5ohm resistance
7) 21700 Single Battery Compatibility
8) 18650 Battery Adaptor Included on the Kit
9) Convertible Battery Cover and 2 spare juice pins To Make It a Regular Box Mod
10)silver black or red
Mod specs:
Made of Polycarbonate
Size: 97.5mm x 58.0mm x 28.2mm
5.ow - 90w
Temp range: 100-315deg C (200-600deg F)
Display: 0.96” OLED
Input voltage: 3.2v-4.2v
Output voltage: 0.8v-8.5v
Resistance range: 0.08 ohm -3.5ohm
So what was it like getting this? I was excited but wasn't sure what to expect. It got here, I opened it up and at first, I didn't know how to feel about it. I started tinkering with it and realized it's so straightforward that it's hard to fault. The buttons were sure footed, no rattle, its lightweight, and has the onboard charger if needed. So it checks all my boxes for regulated mod. (i don't like using onboard chargers, but having them is a plus as a just in case)
You top fill the squonk bottle and can put the cap on the bottom of the mod, where a magnet will hold it in place for you. Very thoughtful, convenient feature that I very much appreciate having.
The extra battery cap, while thoughtful, i don't know that i see that as a major selling point. You have to take the little pin out to use it; however, it does look nice as a single cell mod. - you are given 2 extra pins in the event that you lose the one preinstalled.
What is that bonus feature? You can take the squonk bottle off, put on a battery cover and it turns into a 90w single cell mod for a tank or traditional rda.
Whats included:
1) Polycarbonate Body for more Lighter Feel
2) 10ml Top Fill Bottle Capacity
3) 5w - 90w Power & Temperature Control Upgraded
4) 0.96 OLED Screen
5) Max Voltage Output 0.8v to 8.5v
6) 0.08 to 3.5ohm resistance
7) 21700 Single Battery Compatibility
8) 18650 Battery Adaptor Included on the Kit
9) Convertible Battery Cover and 2 spare juice pins To Make It a Regular Box Mod
10)silver black or red
Mod specs:
Made of Polycarbonate
Size: 97.5mm x 58.0mm x 28.2mm
5.ow - 90w
Temp range: 100-315deg C (200-600deg F)
Display: 0.96” OLED
Input voltage: 3.2v-4.2v
Output voltage: 0.8v-8.5v
Resistance range: 0.08 ohm -3.5ohm
So what was it like getting this? I was excited but wasn't sure what to expect. It got here, I opened it up and at first, I didn't know how to feel about it. I started tinkering with it and realized it's so straightforward that it's hard to fault. The buttons were sure footed, no rattle, its lightweight, and has the onboard charger if needed. So it checks all my boxes for regulated mod. (i don't like using onboard chargers, but having them is a plus as a just in case)
You top fill the squonk bottle and can put the cap on the bottom of the mod, where a magnet will hold it in place for you. Very thoughtful, convenient feature that I very much appreciate having.
The extra battery cap, while thoughtful, i don't know that i see that as a major selling point. You have to take the little pin out to use it; however, it does look nice as a single cell mod. - you are given 2 extra pins in the event that you lose the one preinstalled.