Scuba-Matt
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Just got this today
The Atlas by Tatroe Mods. Machined and assembled in the USA.
The Atlas is a Variable Wattage device using the upgraded SX350 chipset.
Installed is the Sony VTC5 18650 battery.
USB Charging port is also installed.
USB charging cable. ( included )
Machined in the USA using 6061 Aircraft grade aluminum.
Clicky switch <--- Yes you will like!
Measurements of device:
Thickness: 1.05 Inches
Height: 3.56 inches
Width: 1.82 inches
The Atlas has many capabilities over other digital devices.
* Regulates battery voltage up and down AKA ( step down feature )
* Reverse battery protection.
* Wattage setting from 5 to 50 watts.
* Voltage from 1.5 to 9.5 volts.
* OHM acceptance from 0.2 up to 3.0
* By-pass function - allows you to run power directly form the battery and not using variable wattage setup.
* Gravity sensor - Adjust and set functions by tilting the device.
* Memory banks - store up to 5 preset wattage settings.
* System shutdown - Completely shut off all power to the device, this conserves battery life versus going into standby mode.
* Upgrade-able - If any updates to the software is available we will provide a link and instructions to the installation of the upgrade.
* 3 click system lock function - lock the firing button with 3 clicks. 3 clicks again will unlock the firing button and place the device into ready mode.
The Atlas by Tatroe Mods. Machined and assembled in the USA.
The Atlas is a Variable Wattage device using the upgraded SX350 chipset.
Installed is the Sony VTC5 18650 battery.
USB Charging port is also installed.
USB charging cable. ( included )
Machined in the USA using 6061 Aircraft grade aluminum.
Clicky switch <--- Yes you will like!
Measurements of device:
Thickness: 1.05 Inches
Height: 3.56 inches
Width: 1.82 inches
The Atlas has many capabilities over other digital devices.
* Regulates battery voltage up and down AKA ( step down feature )
* Reverse battery protection.
* Wattage setting from 5 to 50 watts.
* Voltage from 1.5 to 9.5 volts.
* OHM acceptance from 0.2 up to 3.0
* By-pass function - allows you to run power directly form the battery and not using variable wattage setup.
* Gravity sensor - Adjust and set functions by tilting the device.
* Memory banks - store up to 5 preset wattage settings.
* System shutdown - Completely shut off all power to the device, this conserves battery life versus going into standby mode.
* Upgrade-able - If any updates to the software is available we will provide a link and instructions to the installation of the upgrade.
* 3 click system lock function - lock the firing button with 3 clicks. 3 clicks again will unlock the firing button and place the device into ready mode.