1. UP FOR A NEW CHALLENGE? CLICK HERE TO CHECK IT OUT

TC recommendations for MTL high Nic Salts

Discussion in '"How To" - General Tutorials not found in main ca' started by Mcowan226, May 24, 2018.

  1. Mcowan226

    Mcowan226 New Member

    Blog Posts:
    0
    Joined:
    May 23, 2018
    Messages:
    12
    Hey all. Been using a berserker mini setup with 45-50 mg salts for a few months now. I run a 30g 6wrap around 2.5 mm 1.8 ohms at 10 watts. I tried TC once before when I was sub ohm with nickel and hated it. I just picked up some 30g ss316l to give it another go. Just wondering if anyone has any experience with this and what power/temp combination I should be around. Thanks.


    Sent from my iPhone using Tapatalk
     
    Pegleg Meg likes this.
  2. HondaDavidson

    HondaDavidson Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Mar 21, 2016
    Messages:
    3,893
    There is no correct number to give you.... There is the levels YOU like best.. For SS wire I set TC based on how I vape it in VW mode or unregulated. On my Pico 75 running Arctic fox that means TC wattage is set at about 5% more than VW. Temperature is tuned to Give the vape I want.. My prefered vaping temp is 375f to around 430f. Currently running 3x30ss twisted at .38ohms, TC set at 20watts. VW power is on a curve that peaks at 150% of set point and has a low of 90%.
     

Share This Page

Close This Message