Folken
Member For 1 Year
Hi Vaping Underground !
French living in Tokyo for almost 10 years, I am what you call a "social smoker".
I love to drink outside and smoke cigarettes (generally 8mg)
When I stay out late, I can smoke an entire pack and next mornings are terrible (alcohol is also involved).
I Watched tons of videos on Youtube, took time to read as much info as possible on the web and switched to vape few weeks ago !
It was quite confusing at first.
Many mods, juices, vaping style, batteries etc.
My first purchase was the D19 Joyetech.
Then I wanted to get a better flavor and went for and RDA with a SMOK mod.
I have many issues with my SMOK mod, error messages "battery check", "short atomizer" or "don't abuse protetcs"...
What did I do wrong ?
I wonder if this is a battery problem, the coils, my SMOK mod, the RDA that is not adapted...
I am a bit lost and seeking help
Here is my set :
- SMOK AL85 mod https://www.smoktech.com/kit/al85
- DIGIFLAVOR Drop RDA http://digiflavor.com/project/drop-rda/
- Fused Clapton coil 0.25 ohm/ 0.3 ohm https://www.gearbest.com/accessories/pp_619208.html?wid=21
- Efest 18650 - 3000mAh 35A 3.7V
The problems I get with the Drop RDA set on my SMOK AL85 are :
- when pressing the fire button "battery check"
I could vape at the beginning (0.25 ohm coils) but only at lower Watt below 30W, otherwise the message will be displayed again.
I changed the coils to 0.3 ohm and I can't vape even lower than 30W, now it has displayed "short atomizers" "don't abuse protects"
- the battery is getting hot
I can feel the mod is really hot after vaping, (chain vaping almost impossible)
PCB went high sometimes above 50C°
SMOK AL85 can go up to 80W but I couldn't vape above 35W with the Drop RDA set.
Also when I screw the D19 tank on the SMOK AL85 I had no problem to vape.
What seems to be the problem ? I need your insight ~
Many thanks in advance
French living in Tokyo for almost 10 years, I am what you call a "social smoker".
I love to drink outside and smoke cigarettes (generally 8mg)
When I stay out late, I can smoke an entire pack and next mornings are terrible (alcohol is also involved).
I Watched tons of videos on Youtube, took time to read as much info as possible on the web and switched to vape few weeks ago !
It was quite confusing at first.
Many mods, juices, vaping style, batteries etc.
My first purchase was the D19 Joyetech.
Then I wanted to get a better flavor and went for and RDA with a SMOK mod.
I have many issues with my SMOK mod, error messages "battery check", "short atomizer" or "don't abuse protetcs"...
What did I do wrong ?
I wonder if this is a battery problem, the coils, my SMOK mod, the RDA that is not adapted...
I am a bit lost and seeking help
Here is my set :
- SMOK AL85 mod https://www.smoktech.com/kit/al85
- DIGIFLAVOR Drop RDA http://digiflavor.com/project/drop-rda/
- Fused Clapton coil 0.25 ohm/ 0.3 ohm https://www.gearbest.com/accessories/pp_619208.html?wid=21
- Efest 18650 - 3000mAh 35A 3.7V
The problems I get with the Drop RDA set on my SMOK AL85 are :
- when pressing the fire button "battery check"
I could vape at the beginning (0.25 ohm coils) but only at lower Watt below 30W, otherwise the message will be displayed again.
I changed the coils to 0.3 ohm and I can't vape even lower than 30W, now it has displayed "short atomizers" "don't abuse protects"
- the battery is getting hot
I can feel the mod is really hot after vaping, (chain vaping almost impossible)
PCB went high sometimes above 50C°
SMOK AL85 can go up to 80W but I couldn't vape above 35W with the Drop RDA set.
Also when I screw the D19 tank on the SMOK AL85 I had no problem to vape.
What seems to be the problem ? I need your insight ~
Many thanks in advance