Hello all, I am using a kbox 200 and I wanted a break from having to constantly drip my RDA so I bought a tfv8 cloud beast. I like my resistance around .4 - .5 ohms. I bought the cloud beat mainly because of the airflow and RBA however it comes with pre installed coils running at .15. All I had was more clapton wire and some 24g kanthal. I did 12 wraps around a 3.5 mm core (dual coil).
After per burning and getting the glow right, the coils are reading at .69(which is fine by me).
BUT when I fire, the voltage runs up to 5+ volts (I am using samsung 18650's) and there is a weird hissing sound. If i was sure it was the coils i wouldn't be worried. In an attempt to see if it in fact WAS my batteries I put the tfv8 base on my wifes seigeli 75w tc (same settings) and it fires for about 3-5 seconds before saying to check the battery.
I just don't want this thing to blow up in my face guys. Anyone want to clear thing up for me?
After per burning and getting the glow right, the coils are reading at .69(which is fine by me).
BUT when I fire, the voltage runs up to 5+ volts (I am using samsung 18650's) and there is a weird hissing sound. If i was sure it was the coils i wouldn't be worried. In an attempt to see if it in fact WAS my batteries I put the tfv8 base on my wifes seigeli 75w tc (same settings) and it fires for about 3-5 seconds before saying to check the battery.
I just don't want this thing to blow up in my face guys. Anyone want to clear thing up for me?