Igo W6

[Brandon09]

Im new to cloud chasing, i have a Igo W6 on a Nzonic mod. All i have right now is 28 gauge kanthal. Can you guys tell me what build I can do to blow clouds? Like how many wraps, or what kinda coil i need to make, and what ohms it would read. I do not have a ohm reader yet. I was thinking 4 5 wrap coils but that may be wrong. Any help is appreciated!

 

[lordcardigan]

Assuming you have an understanding of using RDAs and the safety involved, you then have to decide what resistance you want. When I first started using the W6 I really enjoyed a quad coil setup with 10 wraps on a 1.4 mm drill bit. But it is quite a pain to build the W6 and consumes a lot of juice. Still. start with 4 coils of 12 wraps, aiming for 2 ohms for each, this will give you .5 ohms and a pretty decent vape.

 

[Jah]

or you could just do something like a dual parallel, say 5 wraps around a 3mm bit, not real sure if the W6 is large enough for that big a diameter of coil, if not a 2.4 ID with 6 wraps would be about the same