I need help with my stick v8 from smok as I cannot call the long distance number. I charge the battery and the charging light goes off. So I turn it on and each time I try to vape the main indicator flashes.
Many timesyou try disconnecting the tank and reconnecting it/?
How many blink are you getting?I need help with my stick v8 from smok as I cannot call the long distance number. I charge the battery and the charging light goes off. So I turn it on and each time I try to vape the main indicator flashes.
How many blink are you getting?
From their website ---
"The battery life indicator will blink 4 times each time you take a puff. When it blinks fast with 15 times, it indicates that the voltage is lower than 3.3V"
http://www.smoktech.com/kit/stick-v8
it blinks 4 times when I try to vape and hold down the button and no smoke comes outHow many blink are you getting?
From their website ---
"The battery life indicator will blink 4 times each time you take a puff. When it blinks fast with 15 times, it indicates that the voltage is lower than 3.3V"
http://www.smoktech.com/kit/stick-v8
Yes there juice in the tank. The coil is m2-0.25 ohms direct output by smok. I do not have a differbt tank but I have tried this tank on a different mod and it workedOK, just to eliminate the obvious questions (not saying you haven't done them already, some have overlooked them)
- Did you put juice in the atty (tank) ?
- What coil is in the atty ?
- Do you have a different atty you can put on it to test with ?
And I'm assuming that you get no crackling / sizzling sound when you hold down the fire button?Yes there juice in the tank. The coil is m2-0.25 ohms direct output by smok. I do not have a differbt tank but I have tried this tank on a different mod and it worked
Also a picture of the 510 pin on the atty. --- like this. I am specifically looking for the protrude / depth of the 510 pin on this picture.
View attachment 77314
It still does the same thingExcellent! Thank you for the clear pictures.
Your 510 on the MOD looks fine. The only thing to check is if the center pin can be pushed in. It should be spring loaded pin, so just press it in slightly (not a lot of pressure) and see if it moved up/down.
Second. On that tank, the 510 pin looks good. The one issue that I've had with that atty is the pin can sometimes not make good contact with the coil (juice on it, dirty, etc). However, you said the atty works on another MOD without issue.
The only thing left that you can check, is if you have a volt meter. The gold 510 center pin is the (+) positive post. The threading is the (-) negative post. If you have extra arms attached to your body you can do this trick yourself, otherwise you will need someone's assistance. You will need to hold the volt meter to each post and press the fire button --- you should have voltage on your volt meter, approx 3.2 ~ 3.7V
Ok thankyou for the attention/helpI'm not sure how long you have had your MOD or if it is brand new, but I would say that the MOD is defective / 510 pin is bad.
You will have to warranty it or return it to the place of purchase if it is still in warranty.
How many blink are you getting?
From their website ---
"The battery life indicator will blink 4 times each time you take a puff. When it blinks fast with 15 times, it indicates that the voltage is lower than 3.3V"
http://www.smoktech.com/kit/stick-v8
in the user manual it says when it blinks 4 times, there is a short circuit. mine is doing this now when i put in the second coil that came in the box (M-2 0.25 ohm)I need help with my stick v8 from smok as I cannot call the long distance number. I charge the battery and the charging light goes off. So I turn it on and each time I try to vape the main indicator flashes.
I'm not sure if you have fixed this yet but I was having the same problem and just cleaned where the power source makes contact with tank and it started working.I need help with my stick v8 from smok as I cannot call the long distance number. I charge the battery and the charging light goes off. So I turn it on and each time I try to vape the main indicator flashes.
you try disconnecting the tank and reconnecting it/?
in the user manual it says when it blinks 4 times, there is a short circuit. mine is doing this now when i put in the second coil that came in the box (M-2 0.25 ohm)
Yes there juice in the tank. The coil is m2-0.25 ohms direct output by smok. I do not have a differbt tank but I have tried this tank on a different mod and it worked
in the user manual it says when it blinks 4 times, there is a short circuit. mine is doing this now when i put in the second coil that came in the box (M-2 0.25 ohm)
I've had one for a few months and has been flawless. I love this little setup.
I had the same issue when i first got mine. I disassembled mine completely before using it to understand how it all went together, and when i put it all back together i screwed the coil in way too tight. if you unscrew the coil you'll notice the pin in the connector is loose so it can be adjusted. So i loosened the coil up and pressed the pin in so it protruded only a teeny tiny bit, and now i can screw the tank onto the battery nice tight and flush and it works. hope this helps you out too.Hello, i had the same problem with my stick v8 baby, i fixed it just by loosen a little bit my atty, not perfect but it works
read my above reply. you screwed the coil in too tightin the user manual it says when it blinks 4 times, there is a short circuit. mine is doing this now when i put in the second coil that came in the box (M-2 0.25 ohm)
I need help with my stick v8 from smok as I cannot call the long distance number. I charge the battery and the charging light goes off. So I turn it on and each time I try to vape the main indicator flashes.
If I was you I'd take it to where you got it, that's if you got it from a shop.I recently bought a Smok V8 and it's not holding a charge. Everything works as it should when it's connected to the charger, but won't work at all if I disconnect it, simply blinks 4 times. Again, everything works fine while plugged in, but not when I unplug. What can the issue be?
Excellent! Thank you for the clear pictures.
Your 510 on the MOD looks fine. The only thing to check is if the center pin can be pushed in. It should be spring loaded pin, so just press it in slightly (not a lot of pressure) and see if it moved up/down.
Second. On that tank, the 510 pin looks good. The one issue that I've had with that atty is the pin can sometimes not make good contact with the coil (juice on it, dirty, etc). However, you said the atty works on another MOD without issue.
The only thing left that you can check, is if you have a volt meter. The gold 510 center pin is the (+) positive post. The threading is the (-) negative post. If you have extra arms attached to your body you can do this trick yourself, otherwise you will need someone's assistance. You will need to hold the volt meter to each post and press the fire button --- you should have voltage on your volt meter, approx 3.2 ~ 3.7V
I need help with my stick v8 from smok as I cannot call the long distance number. I charge the battery and the charging light goes off. So I turn it on and each time I try to vape the main
literally just had same problem,,couldn' get help from what I was reading so I just started messing with it ,,it started working for me by putting pressure and turning out and in my cartridge ,,it stopped a couple of times but did it again and works for now,,,hey i just bought a v8 stick and im having the same problem, ive charged it for over 5 hours, changed the coil, cleaned everything but it still will not work. any ideas on what to do?