2JNT Pilak's are my favorite Mod's, pictures certainly do not do any justice. They are so easy to maintain and nothing hits as hard nor a smoother Vape!So nice I am posting it twice. It belongs here.
Sent from my HTC 10 using Tapatalk
2JNT Pilak's are my favorite Mod's, pictures certainly do not do any justice. They are so easy to maintain and nothing hits as hard nor a smoother Vape!So nice I am posting it twice. It belongs here.
2JNT Pilak's are my favorite Mod's, pictures certainly do not do any justice. They are so easy to maintain and nothing hits as hard nor a smoother Vape!
Sent from my HTC 10 using Tapatalk
Yeah I have 3 of their tubes (18500, 18650 and 20700), their Squonker and the Panther dual parallel. I bloody LOVE them all.I have been on this thing a few days now and it is certainly a very nice mod. I have been using it with a modfather RTA that is nearly as big as the Pilak and it is just smooth as smooth can be. I plan to put it through its cloud chasing paces this weekend once I have some time, but it just feels right and so nice. It is predictable, the fit and finish is top notch and beyond being beautiful it is designed to be a work horse.
Sporting this pair today, Raptor G2 with the Fuel and Custom Classic Squonker with a Reload.
Sent from my HTC 10 using Tapatalk
whats your build on this setup? i have been having trouble finding a build for 30mm/26650 tubes that lights up as fast as i like. i just got my warhead in and it does indeed look amazing on the 2sixWarhead on top of my SS 2six, turns out to be a nice combination
If/when you can, try the Carnage or Headshot RDAs. They don't look like there's anything special about them, but they both really do give a great vape.Finally got one!
My ugly hands ruin the pic.
Purge King 18650 with a silver spring, a silver contact and an extension.
Sent from my SM-S727VL using Tapatalk
I'm going to get a Carnage very soon. I would have gotten one when I ordered the silver pin for this but evcigarettes.com was out of 2 post adapters for the Carnage. The mis-matched posts don't look like something I would like.If/when you can, try the Carnage or Headshot RDAs. They don't look like there's anything special about them, but they both really do give a great vape.
Oh I build hotter on my 30mm attys, with this set up 2x26/38 SS fused Clapton's @ around 0.12-0.13 ohms with a 3.5 di about 5 wraps. I'm also using the iJoy 26650's.whats your build on this setup? i have been having trouble finding a build for 30mm/26650 tubes that lights up as fast as i like. i just got my warhead in and it does indeed look amazing on the 2six
With bigger coils I prefer to use the post, whereas with smaller ones I prefer to use the clamp. That's just because the length of the legs of the coils also plays a part, but a lot of people don't seem like they understand the clamp... that is, they can't wrap their head around the idea of wrapping one coil clockwise and wrapping the other coil counterclockwise.I'm going to get a Carnage very soon. I would have gotten one when I ordered the silver pin for this but evcigarettes.com was out of 2 post adapters for the Carnage. The mis-matched posts don't look like something I would like.
I just bought a copper Voras RDA by VC to go with the king, but I already had a build in the Kennedy and I wanted to try her out!
Edit- I have a carnage on the way with a silver 510 pin and 2 post adapter.
The squonk pin has always been included, as the Carnage came out at the time when the Suicide King Squonker, the Rampage, and the Rebellion mods also came out, and I have already been using it that long (8 months or so). My 3 brass Carnages and my black one all came with the clamp so I got 4 posts from Superior Vapour in the UK the other day (I live across the pond), whereas my blue one that I recently got for my Pandora came with the post.Newer Carnages are shipping with a post adapter and squonk pin.
For me it's not that I can't figure out how to wrap coils in opposing directions, it's the fact that the posts are different. I just don't really understand the point of mismatched posts like that. If the clamp is sweet, why not have 2 clamps? If the screw post is great then why not have two of them? I guess the only reason I could think of it being designed that way is that it would accomadate different length coils without having to spread the legs out, but the same could be accomplished with 2 clamps.With bigger coils I prefer to use the post, whereas with smaller ones I prefer to use the clamp. That's just because the length of the legs of the coils also plays a part, but a lot of people don't seem like they understand the clamp... that is, they can't wrap their head around the idea of wrapping one coil clockwise and wrapping the other coil counterclockwise.
Personally I prefer the postless and sudo postless decks. Some say that they're difficult to build on I very much disagree. All one has to do is measure like stick a wire down to measure, then use it to gauge your coil legs and boom all is good. It's pretty much the same every build and no posts to get in the way. I love the sudo postless Prophet and Reload, they are so easy to build on.For me it's not that I can't figure out how to wrap coils in opposing directions, it's the fact that the posts are different. I just don't really understand the point of mismatched posts like that. If the clamp is sweet, why not have 2 clamps? If the screw post is great then why not have two of them? I guess the only reason I could think of it being designed that way is that it would accomadate different length coils without having to spread the legs out, but the same could be accomplished with 2 clamps.
All that being said I am pumped to try it.
Sent from my SM-S727VL using Tapatalk
As you probably noticed, the clamp is bigger than the post so there isn't enough room for 2 clamps, and, you don't need 2 clamps to avoid having to spread the legs out so I don't really understand the point of obsessing over matched posts when you can still always just buy a fucking Goon instead.For me it's not that I can't figure out how to wrap coils in opposing directions, it's the fact that the posts are different. I just don't really understand the point of mismatched posts like that. If the clamp is sweet, why not have 2 clamps? If the screw post is great then why not have two of them? I guess the only reason I could think of it being designed that way is that it would accomadate different length coils without having to spread the legs out, but the same could be accomplished with 2 clamps.
All that being said I am pumped to try it.
Sent from my SM-S727VL using Tapatalk
I wasn't obsessing about it I was just trying to discuss it. If you want to see obsession take a look in the mirror. Anytime someone say anything slightly critical about purge you get all butt hurt and up in arms dude. There's no need of it.As you probably noticed, the clamp is bigger than the post so there isn't enough room for 2 clamps, and, you don't need 2 clamps to avoid having to spread the legs out so I don't really understand the point of obsessing over matched posts when you can still always just buy a fucking Goon instead.
Oh I got tired of his ignorant self righteous bullshit and put him on my ignore list. Only time his bullshit comes up is when someone quotes this idiotI wasn't obsessing about it I was just trying to discuss it. If you want to see obsession take a look in the mirror. Anytime someone say anything slightly critical about purge you get all butt hurt and up in arms dude. There's no need of it.
Sent from my SM-S727VL using Tapatalk
You are ignoring a lot of valuable information then. He is usually right about everything and I happen to like his personality. I just don't like being scolded for trying to have a discussion either. Anyway I don't have time for forum arguments right now, I have to go make a pile of money.Oh I got tired of his ignorant self righteous bullshit and put him on my ignore list. Only time his bullshit comes up is when someone quotes this idiot
Sent from my HTC 10 using Tapatalk
Right about everything? That is very debatable. Try pointing out something he's wrong about and he'll never, ever admit to it and argue it with circular logic and bullshit. He also loves to misquote mooch That's the primary reason I (and others) got tired of his bullshit.You are ignoring a lot of valuable information then. He is usually right about everything and I happen to like his personality. I just don't like being scolded for trying to have a discussion either. Anyway I don't have time for forum arguments right now, I have to go make a pile of money.
Sent from my SM-S727VL using Tapatalk
I wasn't trying to suggest that you're obsessing over it. Maybe just a little bit passionate, but that's part of what keeps this hobby interesting IMO, and, nope... Purge Mods aren't the be all end all for me despite I own quite a lot of their stuff (and in fact I'm vaping on my CSMNT with Shawty cap right now, lol).I wasn't obsessing about it I was just trying to discuss it. If you want to see obsession take a look in the mirror. Anytime someone say anything slightly critical about purge you get all butt hurt and up in arms dude. There's no need of it.
Sent from my SM-S727VL using Tapatalk
I have a Tarsis 2Six, matt Bronze 265650 Hybrid coming after the 4th if anyone is interested. Original box.
Y'all need to be putting this up in the Hardware section.Looking to sell my black aluminum Broadside Admiral for $ 90
View attachment 114339
Pilak Tycoon is certainly high end. Don't laugh at the recurve on top, its got crazy good flavor.
Golden Rod is the same as my FUK182021, but gold plated limited edition unserialized. Only 5 in existence.
View attachment 118651
Sent from my iPhone using Tapatalk
What is that teal mod? Thats really nice looking and I am not familiar with that one.