Help with a cloud chasing setup

[Chaotic_Vapes]

I have a authentic Mutation X V4 running a dual 26g parallel at .15 ohms and a shitty Smok Extender.

I'm planning on buying a limited edition Snowwolf 200W V1.5 later today.

So my question that puts this in cloud chasing and not the mod forum is...

1. Can somebody shoot me some fairly simple builds for cloud chasing on 4 post RDAs? I've only been building for 2 weeks now and so far the best I've gotten are parallels. Haven't tried a twisted and I certainly haven't tried a clampton. So please spare me all the glorious coil porn (not even sarcastic, that shits fantastic) and be nice to the noobie.

Current build

This is its vapor with a fully charged battery and freshly dripped. It drops significantly after 20-30 draws as the battery gets to its "nominal 3.7" range.

Edit 1: While doing research I decided my X V4 will be sticking around and no Royal Hunter. I guess I'll make do with the leaky bastard.

 

[itsmenotyou]

Top coils are 2.4mm 8 wraps. Bottoms are 3mm 6 wraps. All 24 ga kanthal ohmed out to .17 and would blow 8-10 foot clouds if I did my part

sent from a dumb operated smart phone

 

[Chaotic_Vapes]

Top coils are 2.4mm 8 wraps. Bottoms are 3mm 6 wraps. All 24 ga kanthal ohmed out to .17 and would blow 8-10 foot clouds if I did my part

sent from a dumb operated smart phone

What rda are you using? Just curious.

 

[itsmenotyou]

Troll with the chuff cap with this build (pulled it last night after the picture) I also really liked it in the cube rda because the airflow hits the coils perfectly.

sent from a dumb operated smart phone

 

[Chaotic_Vapes]

Troll with the chuff cap with this build (pulled it last night after the picture) I also really liked it in the cube rda because the airflow hits the coils perfectly.

sent from a dumb operated smart phone

I love the simplicity. Can't wait to build it when the new mod gets here Saturday.

 

[itsmenotyou]

What will you be building on?

sent from a dumb operated smart phone

 

[itsmenotyou]

just re-read the first post lol. With the v4 top airflow open you can fog it out. If it gets to warm open the bottom up

sent from a dumb operated smart phone

 

[Chaotic_Vapes]

just re-read the first post lol. With the v4 top airflow open you can fog it out. If it gets to warm open the bottom up

sent from a dumb operated smart phone

Set up a similar build with 26 gauge kanthal 5 wraps on 2.5 mm each at .2 ohms. It's vaping like a champ. Pretty equal to my parallel build actually but with the new mod coming I'm sure it will outshine no problem.

 

[itsmenotyou]

I gave the 24 build 5 volts give or take around 105 watts and it was a monster

sent from a dumb operated smart phone

 

[Chaotic_Vapes]

I gave the 24 build 5 volts give or take around 105 watts and it was a monster

sent from a dumb operated smart phone

At first it was slow. Now it's a locomotive.

 

[itsmenotyou]

If you want some simple "advanced" shit twist some 26 and do duals on the box. Or if you have patience and the testicular fortitude do quad twised 26. (Never done it. Don't plan to. Although.... well shit. When my cotton arives I will) another simple build i like is 5 wrap 2.4mm 24 ga duals usually around .25

sent from a dumb operated smart phone

 

[Chaotic_Vapes]

If you want some simple "advanced" shit twist some 26 and do duals on the box. Or if you have patience and the testicular fortitude do quad twised 26. (Never done it. Don't plan to. Although.... well shit. When my cotton arives I will) another simple build i like is 5 wrap 2.4mm 24 ga duals usually around .25

sent from a dumb operated smart phone

I'll give it a shot. As of now I've never built twisted coils.

 

[itsmenotyou]

same specs as the 24 quads like this other then this is .20 ohm. Takes a second to ramp up but once it does look out.

Sent from my SM-J100VPP using Tapatalk

 

[Chaotic_Vapes]

same specs as the 24 quads like this other then this is .20 ohm. Takes a second to ramp up but once it does look out.

Sent from my SM-J100VPP using Tapatalk

Not bad. I'm currently trying to get some quad parallels but the heating isn't working well.

 

[itsmenotyou]

Oh man. Quads are a bitch anyway in my opinion. I love/hate/love them haha

Sent from my SM-J100VPP using Tapatalk

 

[Chaotic_Vapes]

Oh man. Quads are a bitch anyway in my opinion. I love/hate/love them haha

Sent from my SM-J100VPP using Tapatalk

It's a love hate relationship.

3/4 btw

 

[Chaotic_Vapes]

Oh man. Quads are a bitch anyway in my opinion. I love/hate/love them haha

Sent from my SM-J100VPP using Tapatalk

Right now it's hate, this quad parallel sucks. The flavor is better than all my other builds so far but I'm a cloud chaser 99% of the time.

I was running dual nano dragons but they were tasting so bad you couldn't enjoy the clouds.

 

[itsmenotyou]

What are the specs on the quad parallels?

sent from a dumb operated smartphone

 

[Chaotic_Vapes]

What are the specs on the quad parallels?

sent from a dumb operated smartphone

I think they were 3 wraps each. Totaling at around .09 (going from memory since I tore them out 5 minutes later).

 

[Cubed2mod]

Really late on this, but I also have the MutationX V4 except on an X Cube II. Current build I just setup tonight is .31 ohms 7 wrap dual 3mm coils. At 57 watts it has amazing flavor (im cloud chasing 99% of the time as well) and the clouds are pretty decent. Best build so far was a 7 wrap 3mm dual coils at .37 ohms from 54.8 watts to 62.6 watts. Clouds for dayyys lol
My camera sucks I know

 

[DaisyVapez]

coil porn mmmmmmmm

 

[DaisyVapez]

With some luck you will be able to do this http://imgur.com/ztQhHAD

 

[Cubed2mod]

With some luck you will be able to do this http://imgur.com/ztQhHAD

Im getting there. I can bend em' but not that big yet! Lmao

 

[DaisyVapez]

Would like to see!

 

[Chaotic_Vapes]

With some luck you will be able to do this http://imgur.com/ztQhHAD

I'm still working on bending but it's all in good fun.


Sent from my dos terminal.

 

[Chaotic_Vapes]

Forgot I have to get some pictures of my latest build up here. This has turned from getting help to almost a log of my cloud chasing haha.


Sent from my dos terminal.

 

[Dcote1983]

Top coils are 2.4mm 8 wraps. Bottoms are 3mm 6 wraps. All 24 ga kanthal ohmed out to .17 and would blow 8-10 foot clouds if I did my part

sent from a dumb operated smart phone

I am trying the same build now mine is ohmed out at .13

 

[kennykoils]

Top coils are 2.4mm 8 wraps. Bottoms are 3mm 6 wraps. All 24 ga kanthal ohmed out to .17 and would blow 8-10 foot clouds if I did my part

sent from a dumb operated smart phone

Is this a quad or a dual? More info on the build wicking and some more pics !! How was the ramp up time on this?

 

[itsmenotyou]

Is this a quad or a dual? More info on the build wicking and some more pics !! How was the ramp up time on this?

Was quads. I ran it around 100watts and ramp up was maybe half a second. The way the coils were made allowed for all the wicks to dry out at the same time. I just cut them all the same length. Sadly I don't have anymore pictures of that build.

sent from a dumb operated smartphone

 

[kennykoils]

Was quads. I ran it around 100watts and ramp up was maybe half a second. The way the coils were made allowed for all the wicks to dry out at the same time. I just cut them all the same length. Sadly I don't have anymore pictures of that build.

sent from a dumb operated smartphone

Right on, I think the ramp up on a mech would be too long to be feasible at around 88 watts

 

[itsmenotyou]

Right on, I think the ramp up on a mech would be too long to be feasible at around 88 watts

3-4 seconds IIRC so yes a little long for mechs.

sent from a dumb operated smartphone

 

[Chaotic_Vapes]

3-4 seconds IIRC so yes a little long for mechs.

sent from a dumb operated smartphone

Especially at anything less than fully charged battery.


Sent from my dos terminal.

 

[NinoCappuccin0]

What rda are you using? Just curious.

Do no buy a Snow Wolf 1.5. I must advise this because for 84.99-94.99 the Laisimo L1 with a color screen and is basically the same design without the rear glass as the Snow Wolf. It's the same company. It's practically the Version 2 of the Snow Wolf. The chip is all new and the color screen is awesome. It's cheaper and is better with TC if you're into that. I'm not but I have put my Snow Wolf 1.5 limited edition away for good since getting more powerful mods with chips that are better and the Laisimo L1 is definitely What you want. laisimo.com

It's the new snow wolf just look at it. just needed to inform you of this. But I like having the 1.5 limited edition in my collection so it's your call obviously. just trying to help ya.

 

[kennykoils]

New build that really chucks on a dual 18650 mech, 7 wrap 3mm 22ga quad

 

[yasaboss]

Do no buy a Snow Wolf 1.5. I must advise this because for 84.99-94.99 the Laisimo L1 with a color screen and is basically the same design without the rear glass as the Snow Wolf. It's the same company. It's practically the Version 2 of the Snow Wolf. The chip is all new and the color screen is awesome. It's cheaper and is better with TC if you're into that. I'm not but I have put my Snow Wolf 1.5 limited edition away for good since getting more powerful mods with chips that are better and the Laisimo L1 is definitely What you want. laisimo.com

It's the new snow wolf just look at it. just needed to inform you of this. But I like having the 1.5 limited edition in my collection so it's your call obviously. just trying to help ya.

No tcr function, or has there been an update for that?

 

[SaintSkinny51792]

With some luck you will be able to do this http://imgur.com/ztQhHAD

HOLY RING LEADER! yup, he's a vape-bender

 

[VapeFlip517]

I have an rx200with a twisted messes clone I just picked up. Did a dual Clapton and this thing is pretty badass. Clone cost me $30 and well worth I think