Custom Retro Coca-Cola Mod SX350 @50 WATTS*!!!

[Wolftek]

Custom Retro Coca-Cola Mod SX350 @50 WATTS*!!!

This is unique custom mod is made from a retro styled Coca-Cola Collectable salt shaker.
The SX350 was installed in gravity sensor menu mode for space and aesthetics considerations.

It includes:
A 510 is a FatDaddy spring loaded center pin 22mm 510 base.
Installed Efest Purple 35A High Drain 2500mAh 18650 battery.
USB Charging Port, Vent Hole.
Battery tray is cradled in a foam tube to prevent rattle and damage.

*How about 50 WATTS!!! YiHi is set to release the 50 watt upgrade next week!
I will upgrade this mod to 50 watts as soon as I get the upgrade file.

Specs:
5 programmable wattage presets
5-50 Watts in .1 increments
0.2-3.0 Ohms
By-pass mode (direct connection to the battery)

Press 3 times to Lock
Press 3 times to Unlock
Press 5 times to enter menu
Tilt left and right through the menu and selections.

I am asking $260 for this BADASS and unique custom mod.
There will only be 2 made of these.

PM me if you are interested and we can work out the deal details.

 

[CurlyxCracker]

Unneeded bump for an awesome mod!

 

[vaperwolf]

That is pretty cool looking. Nice work.

 

[VapinGurl Penny]

That is sooo cool!

 

[Mick]

Oooooh I like it. I'll swap you my purple Convict if you're interested.

 

[CaFF]

Pretty cool mod.

Curious, what material is the body made of?

 

[Mick]

oops

 

[Wolftek]

Oooooh I like it. I'll swap you my purple Convict if you're interested.

Thanks for your interest in the mod. Purple is just not my color (I’m a Blue Guy)
And I really need the cash to build the other ones I have Ideas for.

 

[Wolftek]

Pretty cool mod.

Curious, what material is the body made of?

The red part is made of plastic (ABS maybe). The top and bottom chrome parts are some kind of cast alloy. Ferronickel as far as I can tell. They are heavy and a magnet will barely stick to it.

 

[VapingWithGmo]

Trades?

 

[617vapor]

How did you do the upgrade on the sx350 chip, I tried doing mine and I got a virus and I had to format my laptop. did you do it from the websight?

 

[Wolftek]

How did you do the upgrade on the sx350 chip, I tried doing mine and I got a virus and I had to format my laptop. did you do it from the websight?

The install software and upgrade files are downloadable from YiHi here: http://****/phOv4e

I upgraded from the files and instructions here: http://****/9epVfA

I was not able to upgrade using the Link menu selection, so I pulled the battery to do the upgrade.
I think that is the best way to do it.

Just a side note: the watt counter will only go up to 36.1 without an addy on it.

 

[twisted_transistor]

I have an sx350 on the way and would love to upgrade it to 50 watts but can't follow your link...

 

[Wolftek]

I have an sx350 on the way and would love to upgrade it to 50 watts but can't follow your link...

Hmmm... Time to trash that shortener. Sorry about that.
Here is the link to YiHi downloads: http://www.yihiecigar.com/download.html
Here is the link to Veritube SX350 page: http://www.varitube.com/Authentic-YiHi-SX350-35W-Chip_p_130.html

 

[twisted_transistor]

Thanks Wolftek

 

[617vapor]

so what is the difference between the sx350 chip and the sx330 that is in IPV50 box mod?

 

[Wolftek]

Custom Retro Coca-Cola Mod SX350 @50 WATTS*!!!

This is unique custom mod is made from a retro styled Coca-Cola Collectable salt shaker.
The SX350 was installed in gravity sensor menu mode for space and aesthetics considerations.

It includes:
A 510 is a FatDaddy spring loaded center pin 22mm 510 base.
Installed Efest Purple 35A High Drain 2500mAh 18650 battery.
USB Charging Port, Vent Hole.
Battery tray is cradled in a foam tube to prevent rattle and damage.

*How about 50 WATTS!!! YiHi is set to release the 50 watt upgrade next week!
I will upgrade this mod to 50 watts as soon as I get the upgrade file.

Specs:
5 programmable wattage presets
5-50 Watts in .1 increments
0.2-3.0 Ohms
By-pass mode (direct connection to the battery)

Press 3 times to Lock
Press 3 times to Unlock
Press 5 times to enter menu
Tilt left and right through the menu and selections.

I am asking $260 for this BADASS and unique custom mod.
There will only be 2 made of these.

PM me if you are interested and we can work out the deal details.

 

[Wolftek]

This Mod Has Been Sold! Thanks to everyone that expressed interest in it.

 

[Wolftek]

so what is the difference between the sx350 chip and the sx330 that is in IPV50 box mod?

I don't think the sx330 can be software updated. Other than that IDK.