Hey guys. Today let's first look at the Curdo Hally Kit. It is a mid-power device ideal for DTL vaping, you may like it if you are not a cloud chaser. Ok, here we go.
Curdo Hally Kit features a solid chassis with two artistic panels. Powered by a single 18650 battery, the mod has variable wattage operation in the range of 1 to 60W and can be fired in temperature control mode. The battery is housed behind one of the panels that is removable and held in place by powerful magnets, so it is not difficult to replace the battery or take it off to recharge. The control face of this mod is located on the side, from top to bottom you can see an oversized fire button, a 0.96" OLED screen, and two adjustment buttons.
As for the tank, it measures in 34.89 x 25.52mm. The pyrex reservoir has a capacity of 3ml and can be refilled via the top. Heating elements for this tank are a 0.4ohm coil and a 0.6ohm coil, you can use them for different vape experiences. At last, this tank has an accurate bottom airflow system, via which you can effortlessly adjust the airflow to your preference. All in all, the Curdo Hally is worth a shot.
Where to buy: https://vapesourcing.com/curdo-hally-kit.html
Parameters
Mod
Size: 77 * 43 * 24.5mm
Material: Zinc Alloy
Battery: single 18650 battery(not included)
Output: 1-60W
Screen: 0.96 inch display
Standby current: <200uA
Tank
Size: 34.89 * 25.52mm
Capacity: 3ml
Resistance: 0.4ohm/0.6ohm
Connector: 510
You may also like: nord vape cena
Curdo Hally Kit features a solid chassis with two artistic panels. Powered by a single 18650 battery, the mod has variable wattage operation in the range of 1 to 60W and can be fired in temperature control mode. The battery is housed behind one of the panels that is removable and held in place by powerful magnets, so it is not difficult to replace the battery or take it off to recharge. The control face of this mod is located on the side, from top to bottom you can see an oversized fire button, a 0.96" OLED screen, and two adjustment buttons.
As for the tank, it measures in 34.89 x 25.52mm. The pyrex reservoir has a capacity of 3ml and can be refilled via the top. Heating elements for this tank are a 0.4ohm coil and a 0.6ohm coil, you can use them for different vape experiences. At last, this tank has an accurate bottom airflow system, via which you can effortlessly adjust the airflow to your preference. All in all, the Curdo Hally is worth a shot.
Where to buy: https://vapesourcing.com/curdo-hally-kit.html
Parameters
Mod
Size: 77 * 43 * 24.5mm
Material: Zinc Alloy
Battery: single 18650 battery(not included)
Output: 1-60W
Screen: 0.96 inch display
Standby current: <200uA
Tank
Size: 34.89 * 25.52mm
Capacity: 3ml
Resistance: 0.4ohm/0.6ohm
Connector: 510
You may also like: nord vape cena