Ya im sure people who pre ordered are not happy at all. They pretty much cut it in half. They waited until the week of the release to change it also.it has just changed from14v to7.6v, 40a to 20a??? cuz i just checked cloupor website, they mentioned that.
This sort of thing is one of the reason's I no longer participate in the pre-order business model.
Seems to be happening more regularly now , when i ordered the iPV 35 watt i got exactly what i thought i would get , most got exactly what they thought they would get with the iPV 50 watt and the Cloupor Cana DNA 30 clone .
These days lots of initially advertised things are being changed or eliminated and pre orders should be avoided until this is corrected....
My only venture into it was the Cloupor Cana. Still working on the day's first cuppa when I saw it and pulled the trigger on the first wave. While it still works I did end up wishing I'd waited for the 510 and perhaps a little more accurate ohms reading. Seems like a wonky way to do business in general. So far I've been pretty good at waiting for the review and perhaps V2 on things but I do have a tragic case of shinyitus.
I have had nothing but great success dealing with cloupor I have owned every generation of the hana clone and with every new model they put out it just got better and better. They just released their 4th generation hana clone that has a hole for the charging light and also has a adjustable 510. I think it is good they are constantly updating their products. On the other hand I do not agree with what these companys are doing with their pre release specs. Its not right to have people preorder one thing and then the week they release it change it. I feel badfor everyone who preorderd the t8When it comes to Cloupor, they have always been a sub par with quality. The 14 volts and 40 amps had to be purposely put in the promo from the beginning. A bait and switch tactic. I wouldn't waste my money on anything from this company.
When it comes to Cloupor, they have always been a sub par with quality. The 14 volts and 40 amps had to be purposely put in the promo from the beginning. A bait and switch tactic. I wouldn't waste my money on anything from this company.
I think a large part of the problem is that manufacturers are introducing their products to the market too early, most before they have even completed production. They complete a few prototypes and then they start selling. The truth usually shows up once the device is into production and that is when all the flaws in design start to show themselves.
I don't think there should be any selling until the first run batch has been completed because so many things can and usually do change during actual production.
The thing that really surprises me is that after all the heat Cloupor received about consistency and chip under performance, their latest versions (T6, T8) are showing to be as inconsistent as ever . Lots of complaints about them being underpowered and not meeting advertised specs .
A few people have commented that the wire used is not capable of handling consistent higher wattage vaping . You would think they would learn and improve , if the mods turn out to not cut the mustard in the end this is a major blunder and it will certainly damage their rep even more.
I don't think there's any question about that and the constant wanting to beat your competition to the punch and release first is causing this imo. They are damaging their rep over time but i am not sure they care , $$ signs floating above the head always gets in the way of best business practices over the long haul .
I have had nothing but great success dealing with cloupor I have owned every generation of the hana clone and with every new model they put out it just got better and better. They just released their 4th generation hana clone that has a hole for the charging light and also has a adjustable 510. I think it is good they are constantly updating their products. On the other hand I do not agree with what these companys are doing with their pre release specs. Its not right to have people preorder one thing and then the week they release it change it. I feel badfor everyone who preorderd the t8
You have told no lies, the T6 is shocking to me .. Received it late last week and I am almost speechless. I really liked the Cana that I reviewed, I found it to be a well made, solid, and accurate device. The T6 by comparison feels like a toy box, so hollow, and yes, it is firing way off by .7-1volt below the voltage display, across the wattage range from 7W to 100W. I can't believe that the same company who made my Cana, made this T6. The most it has going for it is the magnetic back cover and battery life.
If the reviews make me decide not to buy the current one and no updates/newer versions appear then no great loss. It's not as if something won't be along tomorrow that will make me go "Ooohh!!".The problem with waiting for updated or newer versions of mods is some models seem to get quickly discontinued and replaced with something different that you may not care for as much.
Well thanks for that but i i would never lie purposely , i certainly do get things wrong and am far from any expert . Purposely telling an untruth makes absolutely zero sense to me and you will always be exposed much sooner than later .
I remember you and me both had the same complaint about the cana mod , basically it's lack of efficiency and battery life . Don't know how a device can be as efficient as it could be when it comes on and off at will but overall i am very pleased with it for the money.
Anyways i appreciate your knowledge and think your a big time asset to these forums.
I am the opposite. I am sold on the latest and greatest and then bitch about how it let me down.
I am the opposite. I am sold on the latest and greatest and then bitch about how it let me down.
Ahahaha .. we need you for balance
Wow it seems cloupor has really shit the bed so to speak.The T8 is horribly under powered. Best I can get is 102 watts. I have a screenshot of my voltages from 100 to 150 watts in 10 watt increments with a .4 ohm coil and a multi meter.
Seems anyone calling Cloupor out for comment are being told they don't know what they are talking about lol.
Surprisingly though, from the comments i have seen , people who have bought the T8 just say " well i don't need that extra wattage anyway " and are A OK with the shortcomings.
Will do!Let us know if you get any response at all from Elev8vape.
They pulled some not good stuff in the past with pre orders if I remember correctly.
I'm not really "ok with it" so to speak as the T8 was actually a very generous gift from a fellow vapor I would hate to complain. My problem is Cloupor advertising it as something it's not. I have yet to contact them myself. I have contacted Elev8vape where it was purchased not to complain but to let them know it is not a 150 watt device like advertised. Had I actually purchased the device I'd be livid!
I was just relaying what i read from responses around the net , of course not all are happy and some are clearly pissed and they have every right to be .
Bottom line is any device that is initially advertised as being capable of a certain wattage and performance standard and falls far short in real life testing should not be acceptable to anyone , in my opinion thats basically fraud.
Sure, I just don't want to come across as I don't appreciate a free mod as a gift because it doesn't work as designed. It's not really my place. I do however completely agree that for all intents and purposes this is fraud on Cloupor's part. At first I thought it was just mine. A little research shows I'm not the only one. This means one of two things to me, either Cloupor is falsely advertising the device or the QC is horrid. I don't want people buying one and getting burned.
well it is up-gradable so lets hope they upgrade it to its real potential of 14 volts as originally advertised. im sure if we all complain about it and they want to sell more mods an up-grade will be coming soon or i hope its coming soon.
lol So successful that the unit is not even listed on their site anymore.Yeah we can only hope , worked well with the T5 lol.