Best 75 watt one battery mod for uwell crown

[melliebholl]

I have the ipv4 and segeili box mods. I am looking for a single 18650 mod. I never vape above 65 watts. I dont use nickel coils. I use a kanger subtank mini, uwell crown, and an atlantis aspire tanks. I only use sub ohm tanks. I just need something smaller for my hands and don't mind that the single battery has to be changed more often. A huge plus would be an easy cover to remove for battery change (aka, no screws involved)

 

[Neunerball]

Evic VTC Mini, with Firmware upgrade to V3.0. It'll give you a 75W mod, with TC for SS, which you can use for the Crown and it's replacement coil heads. In addition 3 memory slots for TCR.

 

[Burke]

Im using the ipv d3 with my crown and arctic tanks. It works great. Its 80w with tc and super easy the change the battery

Sent from my SM-G900V using Tapatalk

 

[melliebholl]

Im using the ipv d3 with my crown and arctic tanks. It works great. Its 80w with tc and super easy the change the battery

Sent from my SM-G900V using Tapatalk

 

[melliebholl]

Thanks. I'll check it out

 

[melliebholl]

Evic VTC Mini, with Firmware upgrade to V3.0. It'll give you a 75W mod, with TC for SS, which you can use for the Crown and it's replacement coil heads. In addition 3 memory slots for TCR.

 

[melliebholl]

Thanks so much. Everyone here has been so helpful!

 

[DED420]

This! All Day This! Evic VTC Mini w/ Firmware 3.0 , such an amazing combo. Can blow clouds with the best, without compromising flavor. Amazing Mod, Amazing Tank, SS is on point!

 

[vapexin]

Im using the ipv d3 with my crown and arctic tanks. It works great. Its 80w with tc and super easy the change the battery

Sent from my SM-G900V using Tapatalk

If you you don't mind can you please share the settings & coils you use with this combo - Crown + IPV D3?

 

[Huckleberried]

iPVD2 or D3
eVic VTC Mini with upgrade

 

[vapexin]

iPVD2 or D3
eVic VTC Mini with upgrade

IPV D3

 

[Burke]

If you you don't mind can you please share the settings & coils you use with this combo - Crown + IPV D3?

So far ive used the .2ohm coil in wattage mode(~60w), the ni200 coil in tc mode(450*f 55j), and the rba base(slightly modified) with a .76ohm 2.5mm 5wrap clapton coil at 35w.

Sent from my SM-G900V using Tapatalk

 

[Zamazam]

D2 or D3.

 

[skt239]

Evic VTC mini, D2/3, snow wolf mini if you want to be fancy about it. Those are my 3 favorite single 18650's.

 

[james james]

must say i do like the ipvd3 feels great in the hand, heavy well built and cheap! shame there is no ss only drawback for me, zephyrus v2

 

[Neunerball]

So far ive used the .2ohm coil in wattage mode(~60w), the ni200 coil in tc mode(450*f 55j), and the rba base(slightly modified) with a .76ohm 2.5mm 5wrap clapton coil at 35w.

Sent from my SM-G900V using Tapatalk

@Burke Can you be a bit more specific on the Crown RBA slightly modified? I'm interested, due to having several Crown tanks, and the optional RBA for each one. TIA!

 

[Burke]

@Burke Can you be a bit more specific on the Crown RBA slightly modified? I'm interested, due to having several Crown tanks, and the optional RBA for each one. TIA!

I drilled and dremeled the wick holes out bigger on the rba outer cover so it can wick better.

Sent from my SM-G930V using Tapatalk

 

[Neunerball]

I drilled and dremeled the wick holes out bigger on the rba outer cover so it can wick better.

Sent from my SM-G930V using Tapatalk

Aaahhh, ok! Thank you!