Full Disclosure:
Let’s get all the disclosures out of the way. This RDA was sent to me directly from Augvape specifically for the purposes of this review. This will not in any way, shape, or form cause me to give this RDA a favorable review or change my opinion in any way.
First Impression Out Of The Box:
Man, this is one shiny RDA. this Druga has like a mirror finish to it. It’s nice but this thing is going to show every fingerprint that touches it. This is some deck with what looks like thumb screws. What have we hear a Ultem chuff cap as well. Nice first impression.
What’s In The box:
Along with your Druga your get a spare delrin drip tip, ultem chuff style drip tip, 510 drip tip adapter, spare o'rings, a hex key, and a squonk pin. There are no spare post screws.
From Top To Bottom:
The Druga comes set up with the Ultem drip tip. It’s a chuff style cap and although its really nice its just not my style of drip tip. I took a few pulls with it but I swapped it out for the delrin drip tip. The delrin drip tip is more my speed. Really comfortable and tall enough so you don't get bacon lips. Both drip tips have a 10mm bore.
The top cap is set up for dual airflow. You can not run a single coil on this RDA. It has a single o'ring that keeps the top cap in place and the machining is very nice. It has a some good tolerance to adjust your airflow but to be honest it could definitely use some knurling. It’s a little to smooth on top and it makes adjusting the airflow a little difficult.
The sleeve has a beautiful finish and I really like the Daredevil logo on it but I'm not to sure how Marvel comics feels about it. Just kidding, if you look closely enough it's a little different but similar enough for me to comment. There are two airflow slots, one on each side and they are fully adjustable via the top cap. All in all machining is beautiful all around and very well done. All the cut outs are nice and smooth and I just needed one wash and one rinse to get this RDA vaping.
The Deck:
You want innovation? Well, this is an innovative deck. It has thumb screws that screw onto two posts and you lay your leads in between the two posts. Once you leads are hand tightened in place you can snug them up by tightening them further with a phillips head screwdriver.
Very different and very innovative. Of course there is only one terminal per post but the terminal itself measures 2.5mm by 3mm, so you can fit some pretty big coils in there. The deck itself is 24mm and has 20mm of workable usable space. I like the fact that this RDA allows for tool less adjustment and I will get into that in more depth in the next section.
The 510 pin is removable and it can be replaced with an included squonk pin. They even include a hex key for the installation of the squonk pin. There is also a negative post screw so you can take the deck completely apart should you feel the need to do so. The outer part of the deck that the sleeve or barrel slips onto has two decent o'rings that provide pretty good tolerance when removing the sleeve.
Building And Wicking:
This deck is really very easy to build on once you get the process down. Let me explain because it is a little more involved than just throwing a build in. What I do is install one coil at a time I hand tighten the deck screws, clip my leads and then pull the coil out. I move onto the second coil and do the same thing. Then I take both coils and I install them together and hand tighten the screws. I make sure one lead is actually laying over the other. I make my adjustments to the coils and then I snug them down with a good phillips head screwdriver. Wicking is just a matter of pulling through your cotton and tucking it under the coils.
The phillips heads on the thumb screws are a little shallow and I do wish they were deeper. I also wish that spares were included as well. The juice well is pretty deep and the whole deck is 24k gold plated. This RDA is a drippers dream as I get 25-30 drops in it with no problems at all.
But Deuces, How Does She Vape:
She does vape like a dream. Airflow is really smooth. Flavor is fantastic especially with the airflow shut down about halfway. The vape quality actually reminds me of the Vandyvape Icon. I get the best of both worlds with this RDA. I get massive cloud production if I open her up and crank up the mod or I get great flavor if I tighten the airflow and knock down the power a bit.
The build I am running right now is dual Tiger coils. I’m ohming out at .25 in kanthal TC at 80 watts and 500 degrees. I have the airflow ¾ open and I feel I get a great compromise of clouds and flavor this way. The vape is dense, thick, lush and flavorful. The delrin drip tip stays really cool while chain vaping and I am getting an extremely satisfying vape.
Conclusion:
Augvape hit a Homerun here. This is a great RDA with really great flavor and clouds. I do wish it came in black as well because the SS is just a little too shiny for my taste but all in all this is a fantastic RDA. Yeah it has a few minor cons here and there but the value and bang for your buck is definitely there. The Druga is DeucesJack approved.
If you found this review helpful please feel free to leave a comment, give it a like, and give me a follow. If you are a Vendor and would like a DeucesJack Review please PM me on this forum.
Pros and Cons:
A note about Pros and Cons. These are my Pros and Cons. They are very subjective. What may be a pro to me could be a con to you and vice versa.
Pros:
* Machining
* Finish
* Innovative deck
* Easy to build
* Deep juice well
* Thumb screw post screws
* Good oring tolerance
* Two drip tips
* 510 drip tip adapter
* Squonk pin
* Smooth airflow
* Goon style drip tips
Cons:
* No spare deck screws
* Phillips head slots are shallow
* Only dual coil compatible
* Fingerprint magnet
* Top cap needs knurling
***NOTE*** All of these cons are minor and they do not take away from the overall enjoyment of the RDA.
Specs:
* 24mm Diameter
* Two Post Build Deck
* Clamp Snag System
* Knurled Thumb Screws
* Phillips Head
* Convenient and Secure Assembly
* 2.5mm by 3mm Slot Space
* 24K Gold Plated Deck
* PEEK Insulator
* 20mm Deck Diameter
* 6mm Deep Juice Well
* Adjustable Dual Air Slots
12mm by 2mm
* Adjustable via Top Cap
* Rounded Internal Top Cap
* Smooth Vapor Delivery
* 24K Gold Plated 510 Contact
* 304 Stainless Steel
* 810 Drip Tip Fitment
* ULTEM Drip Tip
10mm Bore
* Delrin Drip Tip
10mm Bore
* CNC Engraved
The Tank On Different Mods:
On The Smoant Charon:
On The Smoant Battlestar:
On The Sx Mini G Class:
On The Vaporesso Nebula:
On The Wismec Predator
On The Smok GX350:
On The IPV Vesta:
On The Lost Vape Triade:
On The Craving Vapor Hexohm V3:
Sent from my SAMSUNG-SM-G900A using Tapatalk
Let’s get all the disclosures out of the way. This RDA was sent to me directly from Augvape specifically for the purposes of this review. This will not in any way, shape, or form cause me to give this RDA a favorable review or change my opinion in any way.
First Impression Out Of The Box:
Man, this is one shiny RDA. this Druga has like a mirror finish to it. It’s nice but this thing is going to show every fingerprint that touches it. This is some deck with what looks like thumb screws. What have we hear a Ultem chuff cap as well. Nice first impression.
What’s In The box:
Along with your Druga your get a spare delrin drip tip, ultem chuff style drip tip, 510 drip tip adapter, spare o'rings, a hex key, and a squonk pin. There are no spare post screws.
From Top To Bottom:
The Druga comes set up with the Ultem drip tip. It’s a chuff style cap and although its really nice its just not my style of drip tip. I took a few pulls with it but I swapped it out for the delrin drip tip. The delrin drip tip is more my speed. Really comfortable and tall enough so you don't get bacon lips. Both drip tips have a 10mm bore.
The top cap is set up for dual airflow. You can not run a single coil on this RDA. It has a single o'ring that keeps the top cap in place and the machining is very nice. It has a some good tolerance to adjust your airflow but to be honest it could definitely use some knurling. It’s a little to smooth on top and it makes adjusting the airflow a little difficult.
The sleeve has a beautiful finish and I really like the Daredevil logo on it but I'm not to sure how Marvel comics feels about it. Just kidding, if you look closely enough it's a little different but similar enough for me to comment. There are two airflow slots, one on each side and they are fully adjustable via the top cap. All in all machining is beautiful all around and very well done. All the cut outs are nice and smooth and I just needed one wash and one rinse to get this RDA vaping.
The Deck:
You want innovation? Well, this is an innovative deck. It has thumb screws that screw onto two posts and you lay your leads in between the two posts. Once you leads are hand tightened in place you can snug them up by tightening them further with a phillips head screwdriver.
Very different and very innovative. Of course there is only one terminal per post but the terminal itself measures 2.5mm by 3mm, so you can fit some pretty big coils in there. The deck itself is 24mm and has 20mm of workable usable space. I like the fact that this RDA allows for tool less adjustment and I will get into that in more depth in the next section.
The 510 pin is removable and it can be replaced with an included squonk pin. They even include a hex key for the installation of the squonk pin. There is also a negative post screw so you can take the deck completely apart should you feel the need to do so. The outer part of the deck that the sleeve or barrel slips onto has two decent o'rings that provide pretty good tolerance when removing the sleeve.
Building And Wicking:
This deck is really very easy to build on once you get the process down. Let me explain because it is a little more involved than just throwing a build in. What I do is install one coil at a time I hand tighten the deck screws, clip my leads and then pull the coil out. I move onto the second coil and do the same thing. Then I take both coils and I install them together and hand tighten the screws. I make sure one lead is actually laying over the other. I make my adjustments to the coils and then I snug them down with a good phillips head screwdriver. Wicking is just a matter of pulling through your cotton and tucking it under the coils.
The phillips heads on the thumb screws are a little shallow and I do wish they were deeper. I also wish that spares were included as well. The juice well is pretty deep and the whole deck is 24k gold plated. This RDA is a drippers dream as I get 25-30 drops in it with no problems at all.
But Deuces, How Does She Vape:
She does vape like a dream. Airflow is really smooth. Flavor is fantastic especially with the airflow shut down about halfway. The vape quality actually reminds me of the Vandyvape Icon. I get the best of both worlds with this RDA. I get massive cloud production if I open her up and crank up the mod or I get great flavor if I tighten the airflow and knock down the power a bit.
The build I am running right now is dual Tiger coils. I’m ohming out at .25 in kanthal TC at 80 watts and 500 degrees. I have the airflow ¾ open and I feel I get a great compromise of clouds and flavor this way. The vape is dense, thick, lush and flavorful. The delrin drip tip stays really cool while chain vaping and I am getting an extremely satisfying vape.
Conclusion:
Augvape hit a Homerun here. This is a great RDA with really great flavor and clouds. I do wish it came in black as well because the SS is just a little too shiny for my taste but all in all this is a fantastic RDA. Yeah it has a few minor cons here and there but the value and bang for your buck is definitely there. The Druga is DeucesJack approved.
If you found this review helpful please feel free to leave a comment, give it a like, and give me a follow. If you are a Vendor and would like a DeucesJack Review please PM me on this forum.
Pros and Cons:
A note about Pros and Cons. These are my Pros and Cons. They are very subjective. What may be a pro to me could be a con to you and vice versa.
Pros:
* Machining
* Finish
* Innovative deck
* Easy to build
* Deep juice well
* Thumb screw post screws
* Good oring tolerance
* Two drip tips
* 510 drip tip adapter
* Squonk pin
* Smooth airflow
* Goon style drip tips
Cons:
* No spare deck screws
* Phillips head slots are shallow
* Only dual coil compatible
* Fingerprint magnet
* Top cap needs knurling
***NOTE*** All of these cons are minor and they do not take away from the overall enjoyment of the RDA.
Specs:
* 24mm Diameter
* Two Post Build Deck
* Clamp Snag System
* Knurled Thumb Screws
* Phillips Head
* Convenient and Secure Assembly
* 2.5mm by 3mm Slot Space
* 24K Gold Plated Deck
* PEEK Insulator
* 20mm Deck Diameter
* 6mm Deep Juice Well
* Adjustable Dual Air Slots
12mm by 2mm
* Adjustable via Top Cap
* Rounded Internal Top Cap
* Smooth Vapor Delivery
* 24K Gold Plated 510 Contact
* 304 Stainless Steel
* 810 Drip Tip Fitment
* ULTEM Drip Tip
10mm Bore
* Delrin Drip Tip
10mm Bore
* CNC Engraved
The Tank On Different Mods:
On The Smoant Charon:
On The Smoant Battlestar:
On The Sx Mini G Class:
On The Vaporesso Nebula:
On The Wismec Predator
On The Smok GX350:
On The IPV Vesta:
On The Lost Vape Triade:
On The Craving Vapor Hexohm V3:
Sent from my SAMSUNG-SM-G900A using Tapatalk
Last edited: