510 or your (+) positive pin is over tighten or too loose. It can be a worn or burnt insulator that is around it as well. if your 510 is loose or has burnt insulator you built may be causing short because of the loosely conected positive post on the deck.So im running an RDA with dual coils and it keeps telling me I have an atomizer short. All I have to do to fix it is unscrew my RDA from my mod and put it back on. Can anyone tell me what's going on and how to fix it? Any help will be greatly appreciated.
510 or your (+) positive pin is over tighten or too loose. It can be a worn or burnt insulator that is around it as well. if your 510 is loose or has burnt insulator you built may be causing short because of the loosely conected positive post on the deck.
He said it doesn't happen with other atomizers. So probably not the mod.Didn't say what mod you have. Happens a lot with joyetech and Eleaf mods - crappy 510. been several threads about it. Happens often with my Eleaf TC200W
sometimes in the middle of a hit. I use a spacer so the RDA doesn't screw down as far on the Joyetech mods but the Eleaf does it even with the spacer. Unscrew the atty reset the resistance screw the atty back on and vape away.
Thank you so much. .. I had a coil barely touching the deck ,tightening fixing them worked ... thank you so muchTighten the build deck screws, check that the coil is not touching the deck posts, tighten the 510 screw and try again.
If nothing helps and if you have the same problem with other attys, it's probably the mod 510 connector.