Up for your consideration: 5 RDAs in which I tried and just did not get along with.
I try to be as clear and concise with representation of the items so potential buyers feel informed enough to purchase, and to eliminate any buyers remorse once money is sent.
2 - Mterk V2 RDAs - Black and Stainless
Aesthetically these are one of the best looking dual coil RDAs out there, part of a few reasons I purchased the first one... figured Mterk being a coil builder and mech user would design a RDA that was geared towards power users... it wasn't the case.
The RDAs vape well, air flow is abundant and you can choke it down quite impressively considering the cyclopes size air flow opening, but there are some lacking points...
As documented by a few posts of mine, these RDAs (Not sure if its whoever Twisted Messes uses to MFG these using subpar metal ) suffer from some inherent voltage loss... what this translates to... if you're a mech user and are used to 117w with .12Ω builds, you're going to get 108w instead... not game over, but enough for me to dislike. I ended up using the black one on my Double Barrel v3, and it didn't matter... but as I said, for mechs, they are sort of poopy.
Next, the screws for the clamps... they are junk... Yeah Don, you're doing yourself no favors in your sales thread! True, but like my second line of text above, being truthful with what I have for consideration. And worst part is, they don't include a spare set.
My precision Wiha drivers tore them up, one deck its worse than the other, but both still work fine...just have to use a flat head instead.
And that about sums that up.
1 - Occula RDA Black
This RDA I was hopeful for... designed by another builder (Kent Hill aka Twisted Messes)
The Clamps are wonderful, seriously... drop your coils in, crank down as hard as you like, and they are installed... fucking beautiful truly... BUT! (Oh no Don, you're killing your for sale thread again) As I mentioned above, Twisted Messes I think has Augvape make all their stuff, this RDA suffers from the exact same voltage loss, I mean friggn identical voltage loss as the Mterks.
Air flow is even crazier on this than the Terks... and doesn't quite as choke down as well as the Terks... but those CLAMPS!
1-Redemption RDA Black - +Black AFC + Silver Deck+ Standard Deck - Didn't vape it - The voltage read was to low for me to go any further with it.
1-Dead Rabbit V2 Matte Black - Did a voltage read and didn't pass my standards.
1-Trinity Glass US1 V2 RDA Black - This is a really nice RDA... great clamps doesn't have the I don't care about voltage when I vape loss the above RDAs do, but I recently got an Asgard, and it kicked this one out of rotation.
And as a bundle, I have one of my older dual 18650 back up to the back ups back up... back up mods being piggy backed with the 6 RDAs... Noisy Cricket II-25.
How much Don? That's a pretty decent package you have.... (That's what she said )
All for $85 net Shipped ConUS 2-3 Day USPS Flat Rate Box
Not that it matters, but the bundled lot will probably cost nearly $16 to ship... I know it all wont fit in a small flat rate...
I am open to trades, but I am picky... if you're wanting to trade RDA(s), you're going to need to provide me a voltage read (.12-14Ω on a 30T) ... otherwise its totally a waste for me to consider, I'd also accept 30T batteries (new) from IMR, just whatever the price is above figure that many batteries worth
Caveat time: If you have zero feedback, I am not opposed to selling to you, just know that I will insist on payment via Friends or Family only. For all others with FeedBack... Payment PP G&S or if you want to save on the fees FF.
I do accept a $5 non-refundable Hold, applied towards purchase. This is for those that in the off chance next Friday (Or up to a week from today) get paid... I do this for I noticed sometimes people see a good deal, but are a week away from buying said good deal, and well I've been there so I know FOMO
Anyway, pic to accompany via edit.
Be rad!
Don
Trades: I am open to trades
I try to be as clear and concise with representation of the items so potential buyers feel informed enough to purchase, and to eliminate any buyers remorse once money is sent.
2 - Mterk V2 RDAs - Black and Stainless
Aesthetically these are one of the best looking dual coil RDAs out there, part of a few reasons I purchased the first one... figured Mterk being a coil builder and mech user would design a RDA that was geared towards power users... it wasn't the case.
The RDAs vape well, air flow is abundant and you can choke it down quite impressively considering the cyclopes size air flow opening, but there are some lacking points...
As documented by a few posts of mine, these RDAs (Not sure if its whoever Twisted Messes uses to MFG these using subpar metal ) suffer from some inherent voltage loss... what this translates to... if you're a mech user and are used to 117w with .12Ω builds, you're going to get 108w instead... not game over, but enough for me to dislike. I ended up using the black one on my Double Barrel v3, and it didn't matter... but as I said, for mechs, they are sort of poopy.
Next, the screws for the clamps... they are junk... Yeah Don, you're doing yourself no favors in your sales thread! True, but like my second line of text above, being truthful with what I have for consideration. And worst part is, they don't include a spare set.
My precision Wiha drivers tore them up, one deck its worse than the other, but both still work fine...just have to use a flat head instead.
And that about sums that up.
1 - Occula RDA Black
This RDA I was hopeful for... designed by another builder (Kent Hill aka Twisted Messes)
The Clamps are wonderful, seriously... drop your coils in, crank down as hard as you like, and they are installed... fucking beautiful truly... BUT! (Oh no Don, you're killing your for sale thread again) As I mentioned above, Twisted Messes I think has Augvape make all their stuff, this RDA suffers from the exact same voltage loss, I mean friggn identical voltage loss as the Mterks.
Air flow is even crazier on this than the Terks... and doesn't quite as choke down as well as the Terks... but those CLAMPS!
1-Redemption RDA Black - +Black AFC + Silver Deck+ Standard Deck - Didn't vape it - The voltage read was to low for me to go any further with it.
1-Dead Rabbit V2 Matte Black - Did a voltage read and didn't pass my standards.
1-Trinity Glass US1 V2 RDA Black - This is a really nice RDA... great clamps doesn't have the I don't care about voltage when I vape loss the above RDAs do, but I recently got an Asgard, and it kicked this one out of rotation.
And as a bundle, I have one of my older dual 18650 back up to the back ups back up... back up mods being piggy backed with the 6 RDAs... Noisy Cricket II-25.
How much Don? That's a pretty decent package you have.... (That's what she said )
All for $85 net Shipped ConUS 2-3 Day USPS Flat Rate Box
Not that it matters, but the bundled lot will probably cost nearly $16 to ship... I know it all wont fit in a small flat rate...
I am open to trades, but I am picky... if you're wanting to trade RDA(s), you're going to need to provide me a voltage read (.12-14Ω on a 30T) ... otherwise its totally a waste for me to consider, I'd also accept 30T batteries (new) from IMR, just whatever the price is above figure that many batteries worth
Caveat time: If you have zero feedback, I am not opposed to selling to you, just know that I will insist on payment via Friends or Family only. For all others with FeedBack... Payment PP G&S or if you want to save on the fees FF.
I do accept a $5 non-refundable Hold, applied towards purchase. This is for those that in the off chance next Friday (Or up to a week from today) get paid... I do this for I noticed sometimes people see a good deal, but are a week away from buying said good deal, and well I've been there so I know FOMO
Anyway, pic to accompany via edit.
Be rad!
Don
Trades: I am open to trades
Last edited: