Yeah,i seen those and was very tempted,but if i got one,it would just sit,now if those were sqounkers i'd be all over one of those though.
Become a Patron!
The official VAPE MAIL!!!!!!! thread #2
- Thread starter Countrypami
- Start date
-
- Tags
- vape mail
Idk if I got lucky or what, but SXK curved clear are some of the best holding up panels I have used.Some billet box boros and a set of clear panels. Woo-hoo
Sent from a pile of wood chips
I've had the SXK curved clears on both of my Billets for months and not a hint of a magnet coming loose or any other problems. Whatever anybody thinks of that company, they must be doing something right. Their stuff is great for what it is and it sells like hotcakes. Especially their Billet Box stuff. 3F and Fasttch go through it like water.
I'm happy these don't have the huge engraving in them. They're actually completely clear on both panels. I'm happy with them
Sent from a pile of wood chips
I agree, no magnet trouble at all. Could be all my fault (but don't think so) but my SXK Ultem's scratch up like a mofo.
I prefer the ones without the logo as well, although not a deal breaker. I'm not sure if my clear w/ logo are SXK or not.
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
This came in today. Bought it on a whim and it was on sale. It took me a few minutes to realize you don't pump the button, just hold it down and the juice comes up until you let off the button. Now if only I could stop trying to FIRE it with that button LOL. Not a bad squonk. I don't care much for the branding all over the damn thing but maybe I can find a skin or something. Really old school RDA here. But I have always liked it. The juice comes out over the top of the coils
Last edited:
you mean that's not the fire button up on that top corner?
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
No the fire button is on the front below the pump system button. Sorry, pic is a little dark. Just need a bit of time to get used to it is all
I almost bought that Broadside pair like 6 times. If he hadn't moved it, I probably would have.
I was in that same boat, almost pulling the trigger on em.
There was that and an MCV tube over on Reddit. I went back and forth and they both sold.
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Yahoooo, You all were right. This RDA is amazing! Worth every freaking penny. Thank you for being such great enablers. I am impressed on how fast it got here too. Vaping Delights will be getting more of my business, that's for sure.
That's where I got mine too. Good vendor. They did me right too. They stock mostly above the general mainstream though. Lotsa nice shiny stuff over there.
There's a few of us running this combo now.
Atom + Asgard Mini =
Oh yeah. I remember that Demon Killer atty. They made a really small internal battery mod that went with it if memory serves.
I'm impatiently waiting for a delivery. I got a notice first thing this morning that my Asgard is Out For Delivery. It's not here yet!
Yep, it was about the size of a Zippo. I was pleasantly surprised by the Tiny atty. Hella flavor bangers. They even come with a BF pin, both white and ultem colored toppers, like 10 .8Ω coils AND some cotton plus the usual o-rings and screws. It's now my official flavor test atty as it doesn't need much wicking material.
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Even I kept looking at that one.
Same. I had to keep reminding myself that I don't like tube mechs enough to justify them. I really only wanted the clone but the authentic for $50 meant I'd have to purchase both.
For the folks (like me) using the Asgard Mini for the first time, I actually found this kid's video to be the best. Never heard of him until I had this RDA on the way. He brings out a few really important things to be aware of with this one.
Also, if you're going to use it on a non squonking mech, I'd yank that goofy squonk pin setup and put the solid one they give you in the bag in there. I'm not a fan of that squonk pin assembly. That little ring around the outside is not enough contact surface for me. First thing I did was pull that out and put the solid one in.
Also, if you're going to use it on a non squonking mech, I'd yank that goofy squonk pin setup and put the solid one they give you in the bag in there. I'm not a fan of that squonk pin assembly. That little ring around the outside is not enough contact surface for me. First thing I did was pull that out and put the solid one in.
I was thinking about changing the pin. I haven't decided yet for sure which mod I'm going to use the Asgard on. I have it on a Brizo for now. I can tell the Asgard will NOT be going on a series mod.
Lots of people use it on the Saga and the other variants in triple series, I'd probably build a simple triple core 30g Aliens for it @.40Ω... ran that in the Stacked Arcless when I had it.
Maybe if I was a single coil guy but no not for me. My stacked/series setups all have dual Serial Killer coils. For me the Asgard doesn't have anywhere near enough airflow for a stacked/series setup. I'm really liking the Asgard with dual Killer coils in it on the Brizo using a 30T. The thing I noticed right off with the Asgard is the flavor is IN YOU FACE! Very intense. I have some DIY Pineapple Peach ejuice that is amazing.
I’m not a single coil guy for series either, but not against it.
I agree the Asgard Mini isn’t overly airy to support a wide variety of series coils, although the Asgard is; never had issue though running .30-.40 in series with it.
The Asgard Mini is above average-Good RDA in my humble opinion, I run 2.5mm .11 Aliens in it, warm enough, near instant ramp and I turn the AF down a smidge.
I might install another set of the same coils but trim the legs more to have it at .10 instead...
Sent from my iPhone using Tapatalk
Yup, need to get another one...
But I’ll wait til his next round in a few months when he has Viking Contacts also
Sent from my iPhone using Tapatalk
You have a 25mm black Unicorn MDX or 3:1 I think if I remember right. That's another one I was thinking at some future point of trying it on. Maybe the Arcless too. It's just so perfect on the Atom though.
I don't know. I might maybe try it in series
I didn't buy it to squonk with anyway, but I just can't get myself sold on that pin setup. I would have preferred just a regular squonk pin.
Last edited:
I've got the copper Keen,it very quickly became my favorite tube mod,they are very comfortable to hold on to.Humpday mail
Sent from my SM-G950U using Tapatalk
Likely the last new, white Topside Carbon on the planet. 
if you have not seen the vid on how they make those, you should. very cool
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
So my half moon mods drip tips got here. Ya they rushed these. The part where the o-ring sits was so damn thin it snapped off first time I used it and It wasn't even tight on the RDA. I get it, it was $5 big deal right? Ya, it kind of is. Colors were pretty but what good is that if they break right away. I put some super glue on it and I will let it sit overnight but I did email them to let them know that's pretty lame. Boo Half Moon Boo. Ho much you wanna bet they don't respond.
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Oh dear.....not good to hear. I’ve got a few coming. Who could pass that up? But if they suck.......booooooooooo
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
You did your homework! There’s a bunch of great flavors there! Woo hoo!
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Let me go look at the other one to see if that one is as thin. On the fury colored one I can damn near see right through the part that sits into the RDA
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Not sure if you can see how thin this is , I put a little piece of paper inside it. I glued it but not sure it will hold.
I hope everyone else's are better. I will let you know if they respond but something tells me I'm SOL. Glad I didn't pay full price
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Argh!!!! That’s so frustrating! I’ll let you know when I get mine. Crossing my fingers.....
I watched that the day it was posted, wanted one ever since.
I already had the Dual and couldn't justify the price at the time. Ended up searching for this one after seeing a magenta one reddit. About 4800 websites later I found this and a blue one. I should've bought that one too.
