slayer420-x
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Im trying to wrap a new coil, and the ohms on my ipv2.1 jump around. Im using 26 gauge, i wrap like 9 wraps around 2.4 mm screwdriver so it should be 1.2 ish ive done that build few times. So i dont know what its doing, ill pulse so i can pinch with tweezers ( i know to let go of button before pinching ) and at first theres hot spots certain spots glow, i pinch then it glows from middle, but ohms will say 1.2, next pulse 1.3 1.4 2 3 ect, then it goes back to 1.2 and stays but now ive pulsed several times & its staying at 1.2 and glowing from middle so ill do few more before wicking to be safe. But idk why it does it, when ohm jumps real high the volts do to & coil goes super bright. I dont think its screws there real tight. Seams they jump around but eventually stay where it should and then its fine, its done it past few coils. Idk if its from pinching or what. I use a ipv2.1, 26 awg, 2.4 mm precision screwdriver btw. idk what im doin wrong, but they seam to stay at 1.2 after.