Panther1911
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Initial Review and comparison to iStick 20W:
my istick 30W came in this morning, so I figured I can do a initial review and later give a better one based on some use
specs on 30W
The iStick 30W is upgraded based on iStick through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. Also, the added button lock functionality protects the buttons and prolong their service life.
Features:
Expanded Range of Output Voltage/Wattage: With the voltage lowest to 2V and highest to 8V, wattage lowest to 5W and highest to 30W, iStick 30W can support sub ohm coil, getting ahead of other products at the same level.
Spring Connector and Stainless Steel Thread: Newly introduced spring connector insures high adaptability and durability. The connecting thread is made of stainless steel which makes it more durable.
New Streamlined Design on Top: This kind of design enables the iStick 30W to be assembled perfectly with 22mm/23mm diameter atomizers
Specification:
Voltage Range: 2.0V-8.0V (20W is 3.0-5.5v)
Wattage Range: 5W-30W (20W goes up to 20watts)
Ohm Range: 0.4O-5O (20W is 1-3 ohm)
Size:
23.0mm x 32.5 mm x 77.0mm
side by side with 20W (20W on left and 30 watt on right)
20W with Aerotank v2 on left and 30W with Lemo on Right
20W with Aerotank v2 on left and 30W with Magma RDA on Right
20W with Aerotank v2 on left and 30W with Atlantis on Right
My first thoughts:
It is damn near the same size as the 20W.
The new design on the top loos pretty good.
My atlantis (0.6ohms) fires fine on it, my Magma (0.8ohms) fires fine on it, but at first it wouldn't read my lemo. I then adjusted the positive post in the 510 connection on the Lemo it has been working good so far. I am have been running lemo (1.2ohms) at 25W, its hitting very nicely.
my istick 30W came in this morning, so I figured I can do a initial review and later give a better one based on some use
specs on 30W
The iStick 30W is upgraded based on iStick through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. Also, the added button lock functionality protects the buttons and prolong their service life.
Features:
Expanded Range of Output Voltage/Wattage: With the voltage lowest to 2V and highest to 8V, wattage lowest to 5W and highest to 30W, iStick 30W can support sub ohm coil, getting ahead of other products at the same level.
Spring Connector and Stainless Steel Thread: Newly introduced spring connector insures high adaptability and durability. The connecting thread is made of stainless steel which makes it more durable.
New Streamlined Design on Top: This kind of design enables the iStick 30W to be assembled perfectly with 22mm/23mm diameter atomizers
Specification:
Voltage Range: 2.0V-8.0V (20W is 3.0-5.5v)
Wattage Range: 5W-30W (20W goes up to 20watts)
Ohm Range: 0.4O-5O (20W is 1-3 ohm)
Size:
23.0mm x 32.5 mm x 77.0mm
side by side with 20W (20W on left and 30 watt on right)
20W with Aerotank v2 on left and 30W with Lemo on Right
20W with Aerotank v2 on left and 30W with Magma RDA on Right
20W with Aerotank v2 on left and 30W with Atlantis on Right
My first thoughts:
It is damn near the same size as the 20W.
The new design on the top loos pretty good.
My atlantis (0.6ohms) fires fine on it, my Magma (0.8ohms) fires fine on it, but at first it wouldn't read my lemo. I then adjusted the positive post in the 510 connection on the Lemo it has been working good so far. I am have been running lemo (1.2ohms) at 25W, its hitting very nicely.