lol, ok. so your saying I need a bigger mod ? just want to be sure. just to be clear, I am not going to be hitting this thing hard = mild MTL.
that innokin is almost good enough. maybe its the battery ?
Nope that was mostly a jest post about how it goes for many vapers as they fall down the vaping rabbit hole so to speak.
I really do not know. Depends on how many watts that atty needs to give you the vape that you want.
A 100W mod should be fine to use regularly up to 60-75W without your battery dropping too low during vapes after it is about 1/2 fully charged.
If you are going to vape consistently above around 60W then I recommend a dual battery mod.
Many/most mods if ran close to their max wattage will start giving a low battery alert at arounf 1/2 charge remaining. This is due to the voltage output dropping under load from the battery which is very normal for a battery.
You can also minimize this by using a genuine mooch approved 25-30 amp CDR battery.
A good 20 amp CDR cell works best at under 75 W.
Only use good mooch approved OEM cells. Never rewraps.
Clue as to rewrap. 18650 cell that says anything over 30A on the wrapper or any 18650 that has over 20A on the wrapper and over 3000 mah.
Those cells do not exist in reality.
Note all wattages are approximations not hard line.
Mods/chipsets, batteries, etc vary.