Become a Patron!

Squonkers are Bonkers

BrewBear

Platinum Contributor
Member For 4 Years
I still don't grok the pico-squeeze love.. It's not regulated, it uses that idiotic proprietary bottle system.

I definitely could learn to love a squonker that size that was regulated - drop in pocket.. Or even like an NC, plus room for a silicone bottle.
It's an acquired taste ! You have to acquire one to develop the taste. It is actually pretty simple, use any battery you have above 15A, build your coils above 0.3 ohms to be safe (tho I've used 0.25 coils with 20A batteries in them without problems). The bottle issue.....well, you just have to get creative but there are choices.
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
Fast(slow)Tech, they have the best price at $16.95 and if you pay the extra dollar or so for United States Express e-packet they get in pretty fast. In fact, just placed my order and the express one was free, since I ordered 3 of them I got another $2.50 off on the order.
Thanks man...for that price I'll get a few.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I still don't grok the pico-squeeze love.. It's not regulated, it uses that idiotic proprietary bottle system.

I definitely could learn to love a squonker that size that was regulated - drop in pocket.. Or even like an NC, plus room for a silicone bottle.

It's just a nice, cheap little squonker that works - love it or don't *shrugs*
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
I still don't grok the pico-squeeze love.. It's not regulated, it uses that idiotic proprietary bottle system.

I definitely could learn to love a squonker that size that was regulated - drop in pocket.. Or even like an NC, plus room for a silicone bottle.

Or even better - VT133 size plus a bottle - nice and deep and DNA ;-)
You will not see a regulated squonk mod the size of the pico squeeze.
I have 3 and 2 more on the way.
 

Zaxxaz

Silver Contributor
Member For 4 Years
Picked up the Wismec Luxotic today. Not terribly sure what I think yet. Open to hearing anyone else's thoughts... well, reading them, anyways...
I really like mine except for the bottle.The mod performs great,and the tobinho is usable once I put a 24guage kanthal round wire build in it.The bottles,while not that bad to push on,are impossible to see your juice level without pulling it down out of the mod.And once the juice gets down to the lower ring it just doesn't squonk very well and I end up refilling it.I'm waiting for Wismec to get the new bottles out and will probably buy a multipack of those so I can use them in my pico squeeze also.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
I'm waiting for @The Cromwell so start making the sleeves!
I had two GR1's and another Pico in the cart, they got dumped and I bought 3 Pico and two TDK for about the same money.
Building tools back up. Have drill press and an X/Y axis clamp to use on the drill press.
Have vacuum pump but my vac chamber got burned up.
Still need to get a router table and bits.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
@The Cromwell - Yes, but one can dream.. Hell, make it larger to take a 2x700 and leverage the extra size ;-)
A squeeze upsized to a 20700 would sell. Bigger battery and most everyone likes bigger and would fit bigger attys which again most everyone like bigger...

Maybe I need to work with Eleaf and come up with the Crom Squeeze mod?
 

snake94115

Diamond Contributor
Member For 4 Years
It must prey upon tiny demons?
demon.jpg
 

BrewBear

Platinum Contributor
Member For 4 Years
A squeeze upsized to a 20700 would sell. Bigger battery and most everyone likes bigger and would fit bigger attys which again most everyone like bigger...

Maybe I need to work with Eleaf and come up with the Crom Squeeze mod?
Well, dang nabbit! Then I'll have to get six more with the 2x700 battery?:gaah::cuss2:
Will that be a MaxiPico? Or a MachoPico?
 

jasonandsarah

Gold Contributor
Member For 3 Years
Picked up the Wismec Luxotic today. Not terribly sure what I think yet. Open to hearing anyone else's thoughts... well, reading them, anyways...
I don't have one but if you got the package deal and don't like the tobino let me know. Wouldn't mind trying one out.

Sent from my SM-G955U using Tapatalk
 

Train

Gold Contributor
Member For 5 Years
Can you post a pic of that? The Kanger plug? And where you got 'em if you remember...

Yep I have 30 bottles for the squeeze have only had to change out 1 since using I started using the squeeze last year I think it was.
I also use the kanger bottle plugs and keep 2 filled squeeze bottles in a 18500 battery case in my go bag.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
All right Bonkos - I need another DT like this one

It is an aftermarket Merlin DT from FT - but they only come in random colors and I bought nearly 30 of them to get just this one in red

To complicate matters, I cannot use acrylic - need a few links for something close to it in looks and performance

EDIT: also must be a 510, not 810 unless it is short bore. Standard 810 is too damn airy for my tastes

Screen Shot 2018-04-12 at 6.25.12 PM.png
 

jasonandsarah

Gold Contributor
Member For 3 Years
All right Bonkos - I need another DT like this one

It is an aftermarket Merlin DT from FT - but they only come in random colors and I bought nearly 30 of them to get just this one in red

To complicate matters, I cannot use acrylic - need a few links for something close to it in looks and performance

EDIT: also must be a 510, not 810 unless it is short bore. Standard 810 is too damn airy for my tastes

View attachment 108711
I have this one I got from 3f awhile ago. Think it was a demon killer branded dt? Can't remember but it's 810 sadly and there's no blue in it.
727b73c45e1b8f7604ffec125c18a42d.jpg
24085d3be48fe8bb4fd8b3975e6e18b5.jpg


Sent from my SM-G955U using Tapatalk
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I have this one I got from 3f awhile ago. Think it was a demon killer branded dt? Can't remember but it's 810 sadly and there's no blue in it.
727b73c45e1b8f7604ffec125c18a42d.jpg
24085d3be48fe8bb4fd8b3975e6e18b5.jpg


Sent from my SM-G955U using Tapatalk

That is a beaut for sure - and I can live without blue in it. But, the right red is critical, because everyone knows it vapes better if its matchy-matchy :crazy:

Yeah, there are some really nice looking 810s out there

I like the width of the 810, but the bore is too much

My favorites are 510 with a large 0D
 

jasonandsarah

Gold Contributor
Member For 3 Years
That is a beaut for sure - and I can live without blue in it. But, the right red is critical, because everyone knows it vapes better if its matchy-matchy :crazy:

Yeah, there are some really nice looking 810s out there

I like the width of the 810, but the bore is too much

My favorites are 510 with a large 0D
Well I would of let you have it if it woulda worked. Feel like I owe you something still since I never got you those dead doors. I still have 3 of them around here but never could figure out how to make a door with both windows.

Sent from my SM-G955U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
All right Bonkos - I need another DT like this one

It is an aftermarket Merlin DT from FT - but they only come in random colors and I bought nearly 30 of them to get just this one in red

To complicate matters, I cannot use acrylic - need a few links for something close to it in looks and performance

EDIT: also must be a 510, not 810 unless it is short bore. Standard 810 is too damn airy for my tastes

View attachment 108711

Would this color red work?

upload_2018-4-12_19-58-6.png

If so, Lawless Drip Tips... $15-$25 has a pull down selection and you can also send him a picture of how you'd like it and he will whip it up for ya.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
ell I would of let you have it if it woulda worked. Feel like I owe you something still since I never got you those dead doors. I still have 3 of them around here but never could figure out how to make a door with both windows.


I have a bright red 810 drip tip if you want it. Never used. Came on the augvape templar. Sorry if I misread what you're looking for if that's not it

That's sweet of both of you - I'd be happy with a link to something similar - I'm getting kinda o_O going through 1,530 pages of DTs on FT, etc
 

snake94115

Diamond Contributor
Member For 4 Years
You will not see a regulated squonk mod the size of the pico squeeze.
I have 3 and 2 more on the way.
Wait isn't the iJoy Capo Squonker about the same size as a Pico Squeeze?
Not that I'd recommend 1 or buy why 1.Just comparing apples to apples.
 

Train

Gold Contributor
Member For 5 Years
No acrylic? What was that one made of?


All right Bonkos - I need another DT like this one

It is an aftermarket Merlin DT from FT - but they only come in random colors and I bought nearly 30 of them to get just this one in red

To complicate matters, I cannot use acrylic - need a few links for something close to it in looks and performance

EDIT: also must be a 510, not 810 unless it is short bore. Standard 810 is too damn airy for my tastes

View attachment 108711
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years

I think that is mislabeled, Augvape does make them out of epoxy resin

But this is what happens when I order their "random" color

Augvape rejoices and says something like "Hey, that sucker Lucy fell for it - again! Hurry up and dig out those extra orange/yellow with some pukey greens for her!"

This is just what was in the cup by my bedstead. I have given away at least 10 in this color and have at least one more five pack in orange/yellow :facepalm:

pukey.jpg
 

~Don~

Platinum Contributor
Member For 5 Years
Was it the red one here?

upload_2018-4-12_21-18-5.png

Location is FB :O name in sticker

EDIT:

I messaged them on FB, probably hear back from them tomorrow maybe.

upload_2018-4-12_21-23-13.png
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Nope! Different materials, chemical composition.
Acrylic = made from polymers of acrylic acid or acrylates
Resin = a solid or liquid synthetic organic polymer used as the basis of plastics, adhesives, varnishes, or other products.
Yep why I said pretty much.
Not sure how accurate DT makers are though.
Depends a lot on the resin used.
Stuff I used with fiberglass work said resin would not want to vape with it though.
 

Train

Gold Contributor
Member For 5 Years
I'm positive @BrewBear has it right - but I'd give drip tip sellers...especially those on eBay or chinese vape sites, about 50/50 chance of being accurate. You might order "Resin" and get an acrylic tip. Vape world problems!!!

(Juicy - you made me buy tips I don't need!! I have a BUCKET of tips, but I just ordered four more, lol.)
 

VU Sponsors

Top