I normally open the window and turn on the fan to vent it out or go out to backyard/patio and vape. But if in car, crack a small window on both front and rear.. It'll force to escape so it doesn't fog up in the car.
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
In asking someone else to handle your business you'd have to compensate them financially, that is the hard part for him. I don't have a dog in this fight but it chaffs to see fellow vapers being taken advantage of.
Buy the looks of it ill have both my haku before this fn atty and we all no how long that takes looks like im leavin that group now im pissed lmao
Sent from my SM-G950U using Tapatalk
@Bardiel003
Abdullah is the only person I know that owns a Ferrari he lives in Kuwait and does not run group buys
Abdullah is the only person I know that owns a Ferrari he lives in Kuwait and does not run group buys
Oh that's the guy I'm thinking then, we'll damn Oo! Idk Allen then.. Unless his fb profile pic is a clown, that guy never gave me any issues. =/ hmm damn..
......... =_=..
The positive is that they do give ample time to get ready with a countdown. Just make an account on their site to speed up th reprocess.
Feel gross dropping $51 on 2 Cappy bottles for basically to only be used on 1 mod
Well think of it this way.. One bottle full of juice, but then you want to swap it out or if thr bottle breaks down too brittle, you got a back up.
I need to start looking for other squonk mods. The bottles from my wraith are becoming stiff and even if warm water treat it to soften. It just soft on one side yet hard on another.
Curious on what kind of RDA that 67 & Vikset are making
Glad you be liking it! Lol yeah my phenom clone I like it, honestly like the juice well of it being restrictive. Made more for squonking. While cruiser is made for as a dripper maybe. I switch both mine out time to time to try get a difference. I don't notice at all, both vape amazing, flavor is on point. Just need another bell or never normal cap for it.
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Weird. I never even heard of that. Of course, I'm such a tightwad, most of the time I'd far rather wait than pay an extra quarter.
Andria
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
After I ordered squonk pins from FatDaddy, I heard that he was pretty much at death's door... yet somehow, someone managed to get those squonk pins sent out.
Andria
I have ultem cap and beauty ring.
My cruiser as clear cap with a clear drip tip and a glow n the dark beauty ring. For phenom om thinking something random lol I want to buy never normal caps but it has a built in drip tip, kinda don't like it hehe.
Weird. I never even heard of that. Of course, I'm such a tightwad, most of the time I'd far rather wait than pay an extra quarter.
Andria
Yeoww. Now THAT is some cheaplitist sh!t right there!
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Yeoww. Now THAT is some cheaplitist sh!t right there!
I resemble that remark.
Except, most of the time I'd rather buy from a US vendor than FT, even if FT's price is better, unless the US price is way outta my budget -- because I'm also not very patient. But I have to say, when you pay the small amount extra to bump it up from their free shipping, they really do a pretty good job of getting it to you in a timely fashion, so I've been using FT more, lately. Just because I AM a terrible tightwad. Andria
mt01631
Member For 4 Years
Using a SS316 coil in my atty and when vaping, it did throttle back on the power, is it bang on and as good as a DNA, probably not but it seemed to work.
I just use it mainly in VW and it isn't bad but 150w,
Sent from my ONEPLUS A3003 using Tapatalk
Wait you has the fuchai squonk! Oo lmaoUsing a SS316 coil in my atty and when vaping, it did throttle back on the power, is it bang on and as good as a DNA, probably not but it seemed to work.
I just use it mainly in VW and it isn't bad but 150w,
Sent from my ONEPLUS A3003 using Tapatalk
Ikr! in the group... saw raphies picture change...wonder if thats a rough sketch of it
Would assume so as it is a sketch of an rda. Single coil, screws on the same side, dual airflow and cut out to rest your coiling mandrel on. At least it’s a slightly different layout than most of the single coil rdas that have come out late. Kinda reminds me of that Kira from the pic.
Edit: would also expect a frosted clear cap since Vikset
Last edited:
His son is trying to handle the business.
Sexy!
That's the conversion cap no?
I always thought that was a 22mm at the base with an unnoticeable taper up to 24mm, but could be totally wrong.
In the pics I've seen, the DotRDA seems to overhang. Like I said suuuuper slightly but enough to bug me. And no room for a flow ring. Not to mention the crap placement of the airflow
View attachment 96926
Haven't gotten one yet but I'm really looking forward to it. Probably go for the gold. I'm mainly a stainless guy but I love the Dotmod gold finish.
It will be my first 20700, I scored some of the Sanyo's from the guy who gave me the Pulse, glad I held on to em
And hey, fellow Bonkers..
Is it just me, or are VU's smileys stuck in like 2004?
Time to update that sh!t !
That pic does look like it overhangs just a bit. I believe the conversion cap is 24mm at the base(yes that's what that was) because it covers the 22mm base completly. I don't think the dotrda would tickle my fancy either. That's why I stuck with the Petri.
Now you got me thinking I need a gold! Lol the gold would look sick with red or black doors! Probably look good with gold doors as well. Lol
Sent from my SM-G955U using Tapatalk
PP used to take a few days to transfer to the bank but now when I do it it's always done within a few hours. But I also don't sit watching for it so Idk an exact time.
Sent from my SM-G955U using Tapatalk
Hey, I recently got a VT Inbox and I'm loving it. It works so well that I don't want to use any of my other mods. I'm on my way to being a dedicated squonker, there's no doubt about that.
I have a question about the tubing. Where do you guys buy your replacement tubing? Is there anything special I need to know about it?
I have a question about the tubing. Where do you guys buy your replacement tubing? Is there anything special I need to know about it?
That's not an excuse for a delay, someone took care of shit.
Terribly sad news, but not a "family problems and/or health" excuse that has been used time and time again.
It's kind of like in the PIF section where someone's house was robbed or burnt down or they were out at sea and were marooned on an island to come back and find their girlfriend thought they were dead, cleaned out the house including a brand new VS DNA 250 and got married to someone else
All I'm saying is we've heard it before and more times than not, it's bull shit
Last edited:
Most squonk tubing has a smaller ID than aquarium air tubing.
Wow I just got B2k tracking
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Delete your cookies? Just a thoughtPP is giving me big grief at the AllianceTech site
The site obviously got my account and husband's account confused and now it won't pay
Sent from my SM-G955U using Tapatalk
Now time to wait for another 3-5 weeks of shipping lol
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
This is computer is only a week old computer and its first time at either site - but that would have been a great suggestion
What is it? Medical tubing or something?
Shouldn't be using your hubbys Paypal?
Yeah something like that.
Some hardware stores have the size that will work.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Was not!
It keeps denying payment and says see his email when the denial comes up
Now my PP says the first transaction processed and is complete but AllianceTech says "you didn't pay! we won't sent unless you pay!!!"
Fricking maddening
HCigar mentioned on their FB group about releasing parts to change the Inbox over to regular squonk bottles. No solid news yet but it might be free to current Inbox owners.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
That would so rock - it's my biggest gripe about the Inbox
Those stock bottles are too hard for my diseased fingers
Anyone know anything about the blasphemy squonk?
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Crazy that 10 Hive mods aren’t selling on FB
3-5 weeks? He's in the US lol I should have it in 3 days
Sent from my SM-G955U using Tapatalk
I bought some replacements from FT that are supposedly originals. I go them today and they're much stiffer than the ones it came with. However, I have some very soft silicone bottles I also got from FT. I cut the top off of an Inbox bottle, inserted it upside down in the silicone bottle and it fits perfectly.
I found food grade tubing on Ebay.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Saw that earlier - might try one for a door for my real one, being as the prices for authentic doors is tantamount to assrape
Ohh crap! digital hell.
18 francs (better exchange rate compared to euros, 1:1 compared to 1:1.18) for the new ones on youvape with 5 franc shipping
https://www.youvape.fr/251-octopus-mods
Which reminds me that I’ve got 6 euros in credit for buying my mod there (and 8 euros at barabrume)
If he ships it tomorrow u might but who knows
Sent from my SM-G950U using Tapatalk