I was thinking similar thoughts.Heck if they're still available I'd be getting a few of those Kanger K-Box's Clones from FastTech.
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Not my point.
Think I will get a couple Pico Squeeze's too.
K box? You mean the Kbox mini?
I will wait until the first reviews pop up. I don't much care for their opinions, but I get to see the thing. If it doesn't have the magnetic door for the bottle a la DB 160 I'm in. ....I think.
Actually I have no issues with the DB160 juice bottle door. The DB2 is another matter, not much holding power there.
I have some HG2's that are over 2.5 yrs old and still work fine. I am sure the capacity is down some but not an issue yet.
Will likely replace them with 30Q's.
And will eventually replace my 25R's I use in mechs with VTC5A's.
Will likely replace them with 30Q's.
And will eventually replace my 25R's I use in mechs with VTC5A's.
No the original Kbox.
Possibly the best beater mod/device ever.
https://wholesale.efun.top/kanger-kbox-40w-mod-18650-batteries-fit.html
In truth, I don't have a problem with the DB doors, I managed to lose them in the first couple of weeks
. It seems the bottle door for the Pico has a slightly better design and better magnet. I also bought a 10 pack of replacement doors from FT a while back. Kangaroo didn't deem it necessary to sell replacement doors, or at least not the ones for the DB2.
The Kbox mini holds that place imho.No the original Kbox.
Possibly the best beater mod/device ever.
https://wholesale.efun.top/kanger-kbox-40w-mod-18650-batteries-fit.html
The original Kbox/clones are far too expensive at FT for what you get.
Nope they have them for the Dripbox and the Dripbox 160 but not for the DB2. And shipping from Kanger is horrendous.In truth, I don't have a problem with the DB doors, I managed to lose them in the first couple of weeks
Have 2 white Picos, 10 bottles and a batch of doors in my FT basket.
I'm sure all chargers are different but both my nitecore's fit 20700 and I don't believe they're listed, 21700 fits as well.
Sent from my SM-G955U using Tapatalk
I have a small little vv mod that works really well. I just don't use it anymore. Kinda tiny though so Idk what non stock tank would fit on it?
Answered my own question, it'll fit a 22mm flush
Sent from my SM-G955U using Tapatalk
Answered my own question, it'll fit a 22mm flush
Sent from my SM-G955U using Tapatalk
Who's seen the new dotmod squonks? I'm gonna probably grab one when they're released since I'll have a credit through them soon. They said it'll be under $100 so that's a pretty good price considering it's dotmod.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Haha this is so obnoxious...I don't think I'll run it in the Haku for long.
Build like this would do well in the cruiser slightly turned in the deck.
Vaping nicely though...just the ramp up lil slow til it warms.
Sent from my iPhone using Tapatalk
Build like this would do well in the cruiser slightly turned in the deck.
Vaping nicely though...just the ramp up lil slow til it warms.
Sent from my iPhone using Tapatalk
Haha this is so obnoxious...I don't think I'll run it in the Haku for long.
Build like this would do well in the cruiser slightly turned in the deck.
Vaping nicely though...just the ramp up lil slow til it warms.
Sent from my iPhone using Tapatalk
Doing better for you in the flavor department?
Sent from my iPhone using Tapatalk Pro
Flavor is good with this honker of a coil...but that is truly cause of the mass, I mean look at the thing
I'll probably whip up a 3x28x36 3mm 5 wrap Alien later today... That should slap it at about .32'ish... 3x26x36 3mm 7 wrap now .29My issue as odd as it is, legs down just kills flavor for me, on the other atty, legs down is gold.
I just got an itch to make an Alien this morning after seeing someone post a picture
but I'll end up going back to single strand or OOH thats something I haven't made in a while... dual core Alien...all the shibang of a fused, with the lookie of an alien lol
No worries.I actually like cardamon.I got a couple pints of (Three Twins - Dad's Cardamom) in my freezer currently.
http://threetwinsicecream.com/products/ice-cream/dads-cardamom/
That and a banana nut bread have been the recipes to break me out of my rut lately
I'm finding mine flattens out sweet notes, highlights sharp and earthy. Would suit tobacco but not dessert profiles IMO
I found the Wasp and with the right build need to look no farther.
Too cheap for many reviewers to even review it though it seems....
Too cheap for many reviewers to even review it though it seems....
The comparison to hadaly air put me off.
Who's seen the new dotmod squonks? I'm gonna probably grab one when they're released since I'll have a credit through them soon. They said it'll be under $100 so that's a pretty good price considering it's dotmod.
Sent from my SM-G955U using Tapatalk
The bottle for it is MASSIVE (15ml or so)
I don't think it's to cheap to review for the reviewer per say. More like to cheap to go looking for reviews to buy it, throw it in the cart and pay!
Sent from my SM-G955U using Tapatalk
Still prefer the stumpy RDA. But this will stay in the sometimes rotation for now.
That's the bacon mod!
Sent from planet Krypton
Haha this is so obnoxious...I don't think I'll run it in the Haku for long.
Build like this would do well in the cruiser slightly turned in the deck.
Vaping nicely though...just the ramp up lil slow til it warms.
Sent from my iPhone using Tapatalk
I run 5 wrap in my wasps
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Okay, now that got my attention, lol
EXACTLY! My ADV is a Caramel Coffee Cream DIY and it does mute out the sweet notes.
Yeah I am thinking of trying a 5wrap 28g core next... I thought about only making this a 5 wrap ( what I used to run in dual for .10 ) ...still can...although makes the coil rods a lil messy
I run 8 wrap 25 ga parallel SS in mine. Slightly spaced so that wraps just do not touch.
Fits perfecto.
I dunno someone gave Biker one and he said he was not going to review it...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Probably not enough kickback
For me the hadaly wasn't that it needed more or less air. I can happily go either way. It was the sucking air through a straw effect with the afc through the posts. Apparently the wasp has that obnoxious effect.
I'm ok with restricted or loose, but not obstricted by the straw effect.
On a related note. Haku clone doesn't seem to suffer that like the narda, hadaly or o atty. It's restricted but not obstructed
He has gone pro it seems.
Still like him though and even like Todd even if he is clonephobic.
Todd is good. We visit some of the same threads on brand x.
Busardo or djlsb for technical reviews, but ff to charts since they both waffle excessively.
Looks like they kept their single door design that likes to violently eject batteries like a toaster in need of an exorcism when you try to get at the bottle from the Mike Vapes video where he showed what's coming up for review. Added Smok Alien styling and he said he thinks they changed it to 200W though if that's something you're into.
Ohh I ordered a couple of these drip tips to use on my Wasps. Did not like, caused condensation and such issues.
https://www.fasttech.com/p/7954501
I like these much better and are what I already used on most of my attys.
not as matchy matchy but fit perfectly and work great imho.
https://www.fasttech.com/p/5213000
Just my little drip tip review.
https://www.fasttech.com/p/7954501
I like these much better and are what I already used on most of my attys.
not as matchy matchy but fit perfectly and work great imho.
https://www.fasttech.com/p/5213000
Just my little drip tip review.
ETA from FT for the Capo Squonk updated and now matches other vendors 11/20 date.
i have one on order
i'm channeling my inner tight arse
the bottle looks interesting, with the firm top-soft lower where you squonk
Note to self.....
When your CopperVape leaks a little, disassemble and clean the contact assembly.
My battery got bricked when the fire button got stuck in the "on" position.
Lesson learned and luckily I was prepared....
Boxer clone I got for $14 at the same time I got the CV because I'm H.R. Droppinschtuff.
With my VandyVape Mesh atty.
When your CopperVape leaks a little, disassemble and clean the contact assembly.
My battery got bricked when the fire button got stuck in the "on" position.
Lesson learned and luckily I was prepared....
Boxer clone I got for $14 at the same time I got the CV because I'm H.R. Droppinschtuff.
With my VandyVape Mesh atty.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Surely you could just pull the top assembly off of the Coppervape if it got stuck?
Sent from my Redmi Note 4 using Tapatalk
Maybe he didn't like it and didn't feel like wasting his time on a negative review. Cheap products get reviewed all the time geekay even reviews clones from time to time.
I personally hated the wasp it had so much airflow the coil barely had a chance to warm up enough to produce vapor and closed right down it was unpleasantly turbulent, the built in drip tip was way too short and when you added your own it looked absolutely awful. But some people love it which makes it a real bargain if it's your thing.
I'm all for cheap vaping products and would never ever spend more than $50 on an RDA but tbh I've had nothing but bad experiences with low cost authentics and would much rather spend my cash on a good quality clone of a tried and tested design, than waste it on what some China dude thinks might be a good vape on paper.
The above is especially true for the trend of a YouTube reviewer supposedly designing an RDA for some China man to bring to market. It's so tacky it makes me cringe and I very much doubt the reviewer has very much input it's just a marketing ploy to sell units. Nearly all of them look tacky and gaudy with badly done gold plating and primary colours etc Bonza, Icon, Pulse, Drop...no thanks !
Sent from my Redmi Note 4 using Tapatalk
Le Salmon Carcass and au de Outhouse
Should sell like hotcakes
Tennessee = the stench of crushed Country Music career dreams and Hot Chicken.