Squonkers are Bonkers

[BrewBear]

I just ordered that rabbit squonk mod clone from Hotecig.Hope they are a good company to deal with.It is on sale for $11.50,so no big deal if it's a piece of junk. But maybe it will be a good one lol

Remember Focalecig? It's the same company, different name and no Doris for CS.

 

[BrewBear]

T

I have no Flave, but I have a Gorge, that looks similar.
And I have a Haku and an Entheon I have to give "better flavor" than the Gorge, possibly just from being 22's,

Since it's you askin...and note, this is from running all of these WIDE open...
I'd say the Entheon is pretty darned close in overall airflow to a Nuppin.
Haku has a bit more, but certainly still restricted.
Gorge (and maybe therefore Flave) has noticeably more air.

Thank you both, I guess I'll be looking for an Entheon in the very near future.

 

[Train]

Also to note - according to Alliancetech, the 22 is scaled down, including airflow, from the 24.
So the Flave22 may be more comparable to these other 22's than my Gorge even if that does have the same air as the original Flave...

 

[MrMeowgi]

Got some vapemail today. It's not a squonker,but I traded a squonker for it lol. She's a sweet one,love the colors.

Sent from my LGMS550 using Tapatalk

Love it.

Sent from my Nexus 6P using Tapatalk

 

[Zaxxaz]

Remember Focalecig? It's the same company, different name and no Doris for CS.

I remember them,but never ordered from them. Just hope I get the mod. Can't remember what happened that they had to change the name of the company.

Sent from my LGMS550 using Tapatalk

 

[JuicyLucy]

Got a decently low number too... #12

Man - got mine Saturday and it's #686

 

[BrewBear]

I remember them,but never ordered from them. Just hope I get the mod. Can't remember what happened that they had to change the name of the company.

Sent from my LGMS550 using Tapatalk

Let me put it this way: they put the fast in Fasttech! I ordered something from them and it took so long to ship, I had literally forgotten I ordered it. Their shipping was atrocious at best.

 

[BrewBear]

Man - got mine Saturday and it's #686

It could've been 666!

 

[JuicyLucy]

It could've been 666!

I do have a Tobacco clone of the Velocity with that notorious #

 

[~Don~]

Man - got mine Saturday and it's #686

Neener Neener

Just kidding


Sent from my iPhone using Tapatalk

 

[JuicyLucy]

Neener Neener

Just kidding


Sent from my iPhone using Tapatalk

You shouldn't neener chicks with big plantinum wigs and other atties with the mark of the beast!

 

[BrewBear]

Neener Neener

Just kidding


Sent from my iPhone using Tapatalk

Duude! Pissing off @JuicyLucy is like tap dancing in a mine field!

 

[~Don~]

You shouldn't neener chicks with big plantinum wigs and other atties with the mark of the beast!

View attachment 92761

LOL

 

[JuicyLucy]

Neener Neener

Just kidding


Sent from my iPhone using Tapatalk

Duude! Pissing off @JuicyLucy is like tap dancing in a mine field!

Nah, just jealous

Low number atties vape better, as everyone knows

 

[Khassy]

I actually hate the Wasp. Just me - LOTS of people like it.

The Gorge, on the other hand, I like a lot. And that's why I don't have a Flave - they look so similar, I couldn't imagine there being enough difference to justify. But I just get what I like - sometimes it's $10, sometimes it's $100.
Last few clones I got sucked, so I've backed off buying 'em lately...

What do you hate about the Wasp? I have a Wasp and a Gorge on the way, and an Entheon clone in my shopping cart (as well as a VV Mesh).

 

[BrewBear]

Nah, just jealous

Low number atties vape better, as everyone knows

My atties numbers are so high, I wouldn't know the difference.

 

[raineysky]

Guess tomorrow I will order the clone YFTK Entheon, Ijoy Crapo Squonker, and the Tony B. Pulse mod. Should get it in November. More junk

 

[~Don~]

Man all the various size drip tips I own and none fit the Flave 22...one is close in which I have 2 of...so I'll modify it with the ole dremel tomorrow.

Flave is taking an ultrasonic bath atm




Sent from my iPhone using Tapatalk

 

[BrewBear]

Man all the various size drip tips I own and none fit the Flave 22...one is close in which I have 2 of...so I'll modify it with the ole dremel tomorrow.

Flave is taking an ultrasonic bath atm




Sent from my iPhone using Tapatalk

You mean it doesn't even come with a drip tip? The vaping gods are punishing you for poking fun at JL.

 

[JuicyLucy]

Man all the various size drip tips I own and none fit the Flave 22...one is close in which I have 2 of...so I'll modify it with the ole dremel tomorrow.

Flave is taking an ultrasonic bath atm




Sent from my iPhone using Tapatalk

I used a tiny ultem chuff - I couldn't get anything to fit the cap at all

 

[AndriaD]

Y'all remember that sig or meme or whatever, a couple years ago... "Vape it like you stole it"? That's what I always think of, when i see "hotecig.com".

Andria

 

[The Cromwell]

#Cromwellsowhite

I tried to find some brown cotton.

 

[BrewBear]

I tried to find some brown cotton.

I ain't even gonna touch that one!

 

[JuicyLucy]

I ain't even gonna touch that one!

Sounds plum wrong

 

[Train]

Eh, don't let me spoil it for ya - there's too many people recommending it, it must just be me.
I just couldn't get a good flavorful vape from it, and it seemed "whooshy". But my "likes" are often different...

Gorge, I found SUPER easy to build, I liked the airflow, it can do "clouds" but still had good flavor. I bought a second one.

What do you hate about the Wasp? I have a Wasp and a Gorge on the way, and an Entheon clone in my shopping cart (as well as a VV Mesh).

 

[Train]

Wait, you have a tip in their tip there?
Hmmm. the "proprietary tip" thing might steer me off a Flave...
I'm sure there will be aftermarket caps and such, but I'd prefer the option to use one I already have or one I know I like...
Like knowing I can pop an 810 tip in an Entheon, or any 510 in a Haku - that's an advantage to me.

I used a tiny ultem chuff - I couldn't get anything to fit the cap at all
View attachment 92767

 

[AndriaD]

Ok.. I ordered those "M3" squonk pins from FD... so I can customize my Magma. I consulted with my husband about drilling a tiny hole thru that delrin block, and he doesn't see any problem. And, I ordered the Strike 18 from FT. I did upgrade the shipping, so *hopefully* it should be here within 3 wks -- says it ships in 5 days, and 5-12 days for the shipping. We'll see.

Andria

 

[JuicyLucy]

Wait, you have a tip in their tip there?
Hmmm. the "proprietary tip" thing might steer me off a Flave...
I'm sure there will be aftermarket caps and such, but I'd prefer the option to use one I already have or one I know I like...
Like knowing I can pop an 810 tip in an Entheon, or any 510 in a Haku - that's an advantage to me.

I agree with that - had to try this one though

It just got too hot for me to use theirs

 

[raineysky]

I had the Wasp in the drawer until I bought some of these drip tips for it. Wouldn't take a dual o-ring but this single one works very well. Almost as good as the Gorge and bunches of clouds if you so choose. And on the Gorge I use the Ultem top cap with a 510 drip tip.

 

[JuicyLucy]

I just cannot imagine the Entheon being $70+ better than the Wasp.

I should bust mine out and do a comparison - had it sitting around long enough

 

[~Don~]

I agree with that - had to try this one though

It just got too hot for me to use theirs

Well got this one to almost seat flush...lil more grind on the under side and boo yah tip

Using my mech as a stand lol


Sent from my iPhone using Tapatalk

 

[JuicyLucy]

Well got this one to almost seat flush...lil more grind on the under side and boo yah tip

Using my mech as a stand lol


Sent from my iPhone using Tapatalk

I have an old Caravella clone I use for builds and working on atties, lol

It's one I pray I'm never so desperate to vape on it

 

[fartbubble]

You shouldn't neener chicks with big plantinum wigs and other atties with the mark of the beast!

View attachment 92761

Should put that on my Satan mod

 

[ben73]

FYI @Train , Mr. Bell Cap wrote back, says that drip tip is very verrrry old and was a gift. He doesn't know who made it.

http://www.vapesbyenushi.com/hardware/bell-vape-by-chris-mun-bell-cap-for-haku-by-haku-engineering/

Sent from my ONEPLUS A3003 using Tapatalk

 

[Train]

Me, too! I use this to dryburn...
Clone Sentinel, all brass mech...

Well got this one to almost seat flush...lil more grind on the under side and boo yah tip

Using my mech as a stand lol


Sent from my iPhone using Tapatalk

I have an old Caravella clone I use for builds and working on atties, lol

It's one I pray I'm never so desperate to vape on it

 

[Train]

I have a cap coming. It was the TIP I was asking about - funny, Enushi site is using that same photo, with that "old, no source" tip on it!
Up close now, it actually looks like wood - I thought maybe it was just dark amber resin or something. I just thought the shape was cool and would fit on a lot of "flat cap" rda's nicely...

http://www.vapesbyenushi.com/hardware/bell-vape-by-chris-mun-bell-cap-for-haku-by-haku-engineering/

Sent from my ONEPLUS A3003 using Tapatalk

 

[Bardiel003]

I have a cap coming. It was the TIP I was asking about - funny, Enushi site is using that same photo, with that "old, no source" tip on it!
Up close now, it actually looks like wood - I thought maybe it was just dark amber resin or something. I just thought the shape was cool and would fit on a lot of "flat cap" rda's nicely...
View attachment 92778

I ordered my caps from bell caps group! Can't wait Haku and hadaly. And I hope that be resin.

 

[The Cromwell]

BTW Brown cotton is very high horse cotton.

 

[AndriaD]

I can't figure how y'all use tube mods to do anything on; they fall over if you look at 'em hard. I use a 3" vise mounted on a big slab of 2x6; that fucker ain't moving, when I'm working. Beats the hell out of chasing shit all over the counter.

Andria

 

[The Cromwell]

I use a movkin disguiser to build and burn on.
Very stable and adjustable wattage for burns.

 

[ben73]

I ordered my caps from bell caps group! Can't wait Haku and hadaly. And I hope that be resin.

Im liking the Hussar RDTA single coil deck at the moment Sqounker pin fills its little tank under deck so no flooding , vapes very well , Restrictive DTL not too lose not to tight similar to say , O atty or Narda type , easy to fill the lil tank via hole in deck has 2 small air hole to help filling on opposite side ,
cut airflow channels in the deck to direct to coil , only negative thing is it can whistle when taking a slow toke , if using normally its fine ,
Flavours really freaking nice though , need to find a nice tip for it got a GTv2 tip on there at moment , would love to see a bell cap for this one too,
Just a simple 26g SS 316l spaced build but performs very well,

Sent from my ONEPLUS A3003 using Tapatalk

 

[The Cromwell]

You can run a Hussar on a cheap sqounker?

 

[BrewBear]

You can run a Hussar on a cheap sqounker?

Nope! That's the french made Le CuVape! Only the upper strata of the hyper elite have access to it!
It is on a ultra secret farce book list and ifor you're gonna buy the Chinese clone, please get your name off the list in the group.

 

[Le Furet]

Hey crazy strangers!!
Got tagged about the elusive drip tip for @Train and dove in to this labyrinth to try to catch up, mannn that wasn't easy... you all have been busy!
For me, a little respite in my schedule so was fun to eat dinner with you all!
Just recently confirmed that I'll be in France later than sooner.. from March - June, so will try to pop in here when I can.
Speaking of France, nice to see the 22 Flaves on here, but hey @So619Cal ..how the hell didja manage #12 (?!) .. I got mine 2 weeks ago and it's in the 700's.. let's get him @JuicyLucy !! His atty is like 500 times better than ours!!
: P
The proprietary ultem tip for the 22 will be available soon. And some bell caps from the Munoz bros.
I've mostly been off the Facebook vape train for awhile, but on the new secret Haku 'owners group' list (I know, shut up), I 'won' (the ability to buy) a Cruiser too. All BS aside, I'm really happy to compare it with the Phenom. The Bell Caps for em are sliiiiick. As soon as I find Le Concorde I can die happy!
I've actually been off the squonk train in general for awhile, I sold em all except for my Runt & TLF.. mainly because I am putting that coin toward a full ultem DNA75c BAM, John has a list going up in a couple weeks I'm hoping to get lucky with. I'm leaning toward the regulated mods again and I don't know if you've seen the video of him throwing the BAM around the Target parking lot, but it sold me!! It's half my rent but it's got me twitching. Completely ridiculous I know. We shall see what the vape gods have to say.
My latest (and greatest) vape is the Squid Industries Double Barrel w/ the Reload RTA.
My. Perfect. Vape. Tiny! So simple and great. Already dropped it twice!
Finally found my groove after 6 years of vaping... a strange feeling.
@BrewBear , hey man! To answer your question, about Haku vs Flave vs Entheon... from what I know about your vaping style.. go with the Entheon dude!
Nice to read you all again.. sorry for the long ass post.
Big hugs to everyone, have a great weekend!!
X

PS: Check out the newest from Doge.. Doge4, 2 decks, one specifically for squonking.. love mine. VaporDNA still has the gold version, they don't specify it, but the gold is limited to 100 #'d pieces.. it's super shmexy and $45

 

[BrewBear]

I have a cap coming. It was the TIP I was asking about - funny, Enushi site is using that same photo, with that "old, no source" tip on it!
Up close now, it actually looks like wood - I thought maybe it was just dark amber resin or something. I just thought the shape was cool and would fit on a lot of "flat cap" rda's nicely...
View attachment 92778

Love the look on that DT. @Train, do you have a link to it? Thanks.

 

[The Cromwell]

Nope! That's the french made Le CuVape! Only the upper strata of the hyper elite have access to it!
It is on a ultra secret farce book list and ifor you're gonna buy the Chinese clone, please get your name off the list in the group.

Ohh I must have CuVape clones then.

 

[Passafire]

I had the Wasp in the drawer until I bought some of these drip tips for it. Wouldn't take a dual o-ring but this single one works very well. Almost as good as the Gorge and bunches of clouds if you so choose. And on the Gorge I use the Ultem top cap with a 510 drip tip.

Does it look goofy though? Lol. I haven't found a tip yet that doesn't look hilarious on my wasps.

 

[The Cromwell]

Does it look goofy though? Lol. I haven't found a tip yet that doesn't look hilarious on my wasps.

I just use a 15 mm delrin tip on mine.

matchy matchy does not worry me.
I am still adjusting to the Stab Piss topcap.

 

[Pevinsghost]

Does it look goofy though? Lol. I haven't found a tip yet that doesn't look hilarious on my wasps.

I have one that looks made for it... If it was yellow instead of blue.

 

[ben73]

Depends on if you like mech tubes or not i guess