Become a Patron!

The Merlin RTA by Augvape and Roxy

dave61

Bronze Contributor
Member For 4 Years
Roxy , 6 Merlins Arrived , took 1 , 5 soldout same day , should've brought more :p , also brought some boreases that went out of stock same day,
From now on , anything that says designed by roxy is automatically in my purchase list .
Just a question though , for best flavor , i should stick the coil as close as possible to the Airflow hole right? and make a bigger build i guess ? maybe 3.5-4mm? will probably do a fused clapton today , with the airflow screw off , i tried with it on , really good MTL , but MTL isn't my cup of tea .
Thanks again for the great work Roxy!


Try 2.5 to 3 mm coils
About 2mm above the airflow hole
I get flavor overload on 28ga or 26ga regular coils
Even with weak flavors of juice
My air control screw is off
 

TheKiddVapes

VU Donator
Gold Contributor
Member For 4 Years
Hi Malua and welcome to VU!

Yup, that was an 'interesting' review. OTOH, after watching most of it (couldn't watch it all) the thought it left me with was 'do you even vape bro ...' :confused:
This guy is a an Idiot, yes capital "I", Idiot. He was more concerned about, in his own words, my titties falling out. He can go suck an egg, doesn't even bother to find out what Roxy means as it pertains to the tank. The Merlin is the bomb, home run! Thank you Roxy

Sent from my SM-G925P using Tapatalk
 

roxynoodle

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
This guy is a an Idiot, yes capital "I", Idiot. He was more concerned about, in his own words, my titties falling out. He can go suck an egg, doesn't even bother to find out what Roxy means as it pertains to the tank. The Merlin is the bomb, home run! Thank you Roxy

Sent from my SM-G925P using Tapatalk

I think he did it on purpose to make it look bad. He looks strong enough to me to screw the top into the chamber. And filling with the juice control open? Not sure what he has against me or Augvape. Maybe he's an ecf mod.

That, or he's completely incompetent.
 

Tattari

Member For 3 Years
Member For 2 Years
Member For 1 Year
Roxy one thing i wanna mention , the Driptip is just <3 <3 fucking amazing , i wanna buy at least 10-12 of that if possible , super awesome and doesn't heat up.
BTW , did the wick and the build proper , flavor is really nice , just need to push the coil top a bit to make the airflow less restricted .
Thanks again!
 

TheKiddVapes

VU Donator
Gold Contributor
Member For 4 Years
I think he did it on purpose to make it look bad. He looks strong enough to me to screw the top into the chamber. And filling with the juice control open? Not sure what he has against me or Augvape. Maybe he's an ecf mod.

That, or he's completely incompetent.
I think he's just a complete boob, I've seen another review of his that was the same thing....S H I T!

Sent from my SM-T237P using Tapatalk
 

Tattari

Member For 3 Years
Member For 2 Years
Member For 1 Year
I've never vaped on his big "winner" the Aspire Cleito , but I dam near bought one last night just to see how wrong he is, lol

But said ain't falling for that one
Although he probably failed to build it properly , the clieto is actually one of the best subohm tanks , and i will probably try the RBA for it , and i'm pretty sure it will perform nicely
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Although he probably failed to build it properly , the clieto is actually one of the best subohm tanks , and i will probably try the RBA for it , and i'm pretty sure it will perform nicely

I know its supposed to be Aspire's best yet, I'd be hard pressed to believe its as good as this dildo claims. He says Cleito beats the Hurricane, which I also highly doubt. If that is true, I've been wasting my money on Boreas and now the Merlin, never mind the authentic Gem I invested in.

I call BS
 

Dampfsucht

Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
So many enablers and such little time. Black Merlin is in town. Already received SS Merlin with 2nd Boreas (Black) from STS. Got 2 more black Boreas, and several Alleriei as well as spare glass coming from FT (already shipped). HCigar VT133 and VT75 from ecig coming soon, just waiting on tracking.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
The Cleito is a very nice (tiny) subohm tank, and the RBA is excellent -if you don't mind that it reduces the tank capacity to about 1.5 ml LOL But obviously it doesn't even compare with either the Boreas or the Merlin!

I'll trust your judgment over his any day
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
My Merlin has also made it to the local post. And tracking updated the delivery to today. Guess tracking doesn't know it's a holiday. :giggle:

You poor thing...that drives me CRAZY when tracking show "out for delivery" when I know there is zero chance it will actually happen.
 

CorallineAlgae

Silver Contributor
Member For 4 Years
316l clapton @ 0.8 ohms. Much better.
That's doing it right.
xyxthumbs_zps9f993428_1.jpg_zpsznc2jxhp.gif


384725_117017031750130_100003255027320_85125_1908276785_n_zpsztimoshv.jpg
 

Ryedan

Silver Contributor
Member For 4 Years
Back to the Merlin, we're getting along OK with regular horizontal coil, vaping fine, no leaks. I was in my "wonder if that's possible" mood late last night and since the Merlin didn't like my vertical coil, I put one in the bachelor nano....and it works beautifully! I will try another vertical in the Merlin and this time will use rayon to wick it with. To be continued....

You know, I was thinking the Merlin would probably do well with a vertical coil with external wicking. Don't have mine yet so I haven't tried it. Let us know how your vertical experiment goes please :cool:

Mine was in NY today. Hope it doesn't get bogged down in customs too long!
 

Ryedan

Silver Contributor
Member For 4 Years
Thanks @Ryedan. I've been here for while, but only for reading. Roxy and Merlin are reason why I decided to register. And sorry for misspelling sometimes, english isn't my first language

You're welcome, and your spelling is just fine. I had no idea English might not be your first language :cool:

My first language was German. Spell check is a godsend for me!

Btw, definitely agree with your post. I watched couple reviews and guy is really... I would say weird

Yup, and I think both of us are being kind here. I have the feeling he's not the brightest light in the night sky :giggle:
 
F

fckaugust8th

Guest
@Ryedan, vertical coil is nice. Mr. Merlin and I are having our little spats (or is it spits) but definitely a very nice, flavorful vape...when the little devil isn't spitting back at me. I used rayon this time and that improved the situation somewhat, now I'm playing with the juice control and also airflow . When I need a break from blister tongue , I pick-up the Alleria. I'm pretty sure the problem is with my wicking and not the tank. Also, keep in mind I'm trying to reduce the air flow to a more Kayfun-esque draw. It is a work in progress, I'll get to it but first I have to get back to the real work or I'll be in trouble....again:(
 

Ryedan

Silver Contributor
Member For 4 Years
@Ryedan, vertical coil is nice. Mr. Merlin and I are having our little spats (or is it spits) but definitely a very nice, flavorful vape...when the little devil isn't spitting back at me. I used rayon this time and that improved the situation somewhat, now I'm playing with the juice control and also airflow . When I need a break from blister tongue , I pick-up the Alleria. I'm pretty sure the problem is with my wicking and not the tank. Also, keep in mind I'm trying to reduce the air flow to a more Kayfun-esque draw. It is a work in progress, I'll get to it but first I have to get back to the real work or I'll be in trouble....again:(

Best of luck with it Brewbear! I like my vape with an open draw at around 40 watts so we might find different solutions, but I'll let you know how my experience turns out :)
 

Ogvapez

Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
New interesting review
Btw, my Merlin is shipped yesterday from STS, hopefully I'll get it next week



Sent from my iPad using Tapatalk

This fuckin guy was the biggest fuckin Idiot I seen in my life. He intentionally down played and fucked up the wick to the tank assembly on purpose!! On top of that he tried he's hardiest to hate the Vape coming out of he's fucking fat face lol :cloud::cloud:He's review was to down play AUGVAPE Roxy's Merlin at all cost!! Dude didn't even know how to fuckin wick to even assemble a RTA but he says,, I KNOW HOW I OWN A SHOP?? :blah::crazy: Really and you don't know :poop:??? And right away the Cleito is better, better than anything ever built? Really BRO have you vaped on the Boreas? The Alleria? I bet not dick face!! :treadmill: The worse review I seen to date.. He doesn't know AUGVAPE?,doesn't know Roxy?, yeah right bud!! But sure knows Cleito cause it's so far up he's ass there connected :zombie::kickbutt::deadhorse:
 
F

fckaugust8th

Guest
It seems that my Merlin is in limbo! I believe the JFC is not working the way it was meant to, probably due to the assembly muscleman that over tightened the whole thing. What I took for JFC (and actually worked, sort of) but lead to the leaks and overflow of juice in the deck was the loosening/tightening of the upper tank assembly to the bottom/tank assembly. @roxynoodle , any suggestions?
 

VU Sponsors

Top